Blackboard LC3000 Montageanleitung
LC3000 Laundry System
Installation and Setup Guide
Copyright © 2005 Blackboard Inc.® All rights reserved. No part of this publication may be reproduced or used
in any form or by any means—graphic, electronic, or mechanical including photocopying, recording, taping, or
information storage and retrieval systems—without the express written permission of Blackboard Inc.
Information contained in this document is subject to change without notice.
The following information applies to wired LC3000 systems equipped with LCM20s only.
The following information applies to wireless systems equipped with LWIs and LE3/BRIDGES only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Part 15.21: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to operate the equipment.
Blackboard Inc. LC3000
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This Class A digital apparatus complies with
Canadian ICES-003
Date: 9-9-05 Doc. No.: 1135
TABLE OF CONTENTS
Laundry Installation and Setup Guide 3
TABLE OF CONTENTS
TABLE OF CONTENTS
5OVERVIEW
8 Laundry System Components
9 Laundry System Installation Overview
10 INSTALL AND CONFIGURE LC3000
10 LC3000 Laundry Reader Installation
11 Install the LC3000 Enclosure
12 LC3000 Laundry Reader Configuration
14 Configure LC3000 Reader Using Front Panel Keyboard
14 Configure LC3000 Reader Using RS-232
15 Configure LC3000 Reader Using Telnet
16 WIRED LAUNDRY MACHINE INTERFACE INSTALLATION
16 LE3/PSENCL and LCM20 Installation
16 Install the LCM20 Board in the LC3000
17 Install LE3/PSENCL (if required)
18 Connect External LCM20 to LC3000 and laundry machines
19 LCI Laundry Machine Interface Installation
19 Install Maytag LCI3010 in Laundry Machine
20 Install Alliance/Speed Queen LCI3020 in Laundry Machine
21 Install Whirlpool LCI3030 in Laundry Machine
23 WIRELESS LAUNDRY MACHINE INTERFACE INSTALLATION
24 Wireless Laundry System Installation Overview
24 Mount the LE3/BRIDGE
25 Configure the LE3/BRIDGE Wireless Module
25 Configure the LWI30XX for Laundry Machines
26 Install the LWI30XX in Laundry Machines
31 APPENDIX
31 Reader Operations
31 Laundry Reader Usage
34 Reader Menus and Settings
34 Manager Card
38 Laundry Component Dimensions and Weight
39 Features
TABLE OF CONTENTS
Laundry Installation and Setup Guide 4
TABLE OF CONTENTS
40 Default LC3000 Configuration Settings
40 Restore Default Settings
41 Error Messages (Unix only)
41 Error Messages (windows only)
42 Retrofits
42 MW9010/MW9012 LCR Retrofits (For Wired Laundry Centers only)
42 Danyl Retrofits
42 LC3000 Drill Template
OVERVIEW
Laundry Installation and Setup Guide 5
OVERVIEW
OVERVIEW
This manual provides instructions for selecting, installing, and configuring the Blackboard Laundry System, using the LC3000
Laundry Reader. Recommendations on selecting an installation location are included. Wiring diagrams show you how to con-
nect the LC3000 Laundry System.
The LC3000 Laundry Reader activates and monitors washers and dryers across a laundry center network. The
LC3000 is designed to work with the Blackboard Transaction System (BbTS) and provides user interface through a
display, keypad, and mag-stripe reader. The network connections are 10/100 Base-T or RS-485.
The LC3000 supports new installations for wired or wireless laundry centers. Information for retrofits is available in the
“Appendix” on page 31.
OVERVIEW
Laundry Installation and Setup Guide 6
OVERVIEW
Wired Solution
The wired solution supports up to 60 laundry machines (see Figure 1 below). In laundry centers with 20 or fewer
machines, you only need a single LCM20, which is installed inside the LC3000 enclosure. If your laundry center
supports more than 20 machines, a multiplexer (an LCM20) and an enclosure (LE3/PSENCL) are needed for each
additional set of 20 laundry machines. The LC3000 reader can support a maximum of three (3) multiplexers.
A machine interface (an LCI), which is a wiring harness that communicates with the laundry machine controller, is
connected to a cable within a multiplexer (LCM20). This machine interface must be installed in every laundry machine
to facilitate communication between the laundry machines and the LC3000 laundry reader unit. Several models of
machine interfaces are available. Use Table 1 (on page 8) to determine the correct machine interface (LCI) model
number, based on the manufacturer and model of your laundry machines.
Figure 1: Wired Laundry Center Solution
Campus
Network
Laundry Reader
(LC3000)
w/
Multiplexer
(LMC20)
Multiplexer
(LCM20)
w/
Enclosure
(LE3/PSENCL)
Multiplexer
(LCM20)
w/
Enclosure
(LE3/PSENCL)
Belden 5502UE cable
or equivilant
4-conductor cable
Laundry Center Interface
(LCI)
installed in each machine
1 ---------------------- 20 21 -------------------- 40 41 -------------------- 60
(400’ max)
OVERVIEW
Laundry Installation and Setup Guide 7
OVERVIEW
Wireless Solution
The wireless solution supports up to 60 laundry machines, using a wireless bridge (LE3/BRIDGE). See Figure 2 below.
A laundry wireless interface (LWI) must be installed in every laundry machine to facilitate communication between the
laundry machines and the LC3000 Laundry Reader. The LWI includes a Wireless Interface Module and a wiring
harness. Several models of LWIs are available. Use Table 1 (on page 8) to select the correct LWI model number based
on the manufacturer and model of your laundry machines.
Figure 2: Wireless Laundry Center Solution
Campus
Network
Laundry Reader
(LC3000)
(machines 1 - 60)
Belden 5502UE cable
or equivilant
Laundry Wireless Interface
(LWI)
installed in each machine
Wireless Bridge
(LE3/BRIDGE)
(60 feet)
1 ------------------------------------------ 60
LAUNDRY SYSTEM COMPONENTS
Laundry Installation and Setup Guide 8
LAUNDRY SYSTEM COMPONENTS
LAUNDRY SYSTEM COMPONENTS
Table 1: Laundry System Components
* count a stacked unit as two machines
The Blackboard Laundry System can communicate with most computer-controlled (debit-ready) machines. This
System includes the following components:
Laundry Reader (LC3000)
The Laundry Reader is a wall-mounted card reader with a vertical swipe mag-stripe card
reader. It includes a 15-key keypad and an LCD display. It features a keyed lock to secure the
inside of the unit, along with a hinged door to access the circuit boards.
Laundry Center Multiplexer (LCM20)
The Multiplexer communicates with the LC3000 and controls up to 20 laundry machines. Up to
three LCM20 Multiplexers can be connected to an LC3000 to control a maximum of 60 laundry
machines. The LC3000 communicates to an LCM20 over an RS-485 bus.
Enclosure (LE3/PSENCL)
External Multiplexers (LCM20s), the 2nd and 3rd Multiplexers connected to an LC3000, require
this enclosure for mounting
Common Component Wired Interface Components Wireless Interface Components
Laundry Reader (LC3000):
Supports up to 60 machines*
using up to 3 Multiplexers
(wired); or up to 7 Wireless
Bridges (LE3/BRIDGE) per
Laundry Reader; up to 60
machines within 60 feet
•Laundry Multiplexer (LCM20): 1 per 20
wired machines*; first LCM20 is included
in the LC3000 enclosure; second and third
LCM20s require LE3/PSENCL.
•Enclosure (LE3/PSENCL): (power
supply/enclosure) 1 per external LCM20.
Wireless Bridge (LE3/BRIDGE): 1 per laundry
room; up to 7 Bridges per Laundry Reader; and up
to 60 machines* can be supported within 60 feet.
• Wired Interfaces (LCI)
•LCI3010: Maytag interface, wired: 1 per
machine or complete stacked unit
•LCI3020:Speed Queen interface,
wired; 1 per machine or half stacked
unit.
•LCI3030: Whirlpool interface, wired; 1
per machine or half stacked unit.
• Wireless Interfaces (LWI)
•LWI3010: Maytag interface, wireless; 1 per
machine or complete stacked unit.
•LWI3020: Speed queen interface, wireless; 1
per machine or half stacked unit.
•LWI3030: Whirlpool interface, wireless; 1 per
machine or half stacked unit.
LAUNDRY SYSTEM INSTALLATION OVERVIEW
Laundry Installation and Setup Guide 9
LAUNDRY SYSTEM INSTALLATION OVERVIEW
Laundry Center Interface (LCI)
The LCI is a wiring harness that attaches to the control circuitry within the laundry machine.
There are several LCI models to support machines from different manufacturers and model
types.
Laundry Wireless Bridge (LE3/BRIDGE)
The Bridge provides a wireless connection between the LC3000 and laundry machines. It
communicates with the LC3000 over an RS-485 bus and communicates with LWIs within the
laundry machines over a wireless network.
Laundry Wireless Interface (LWI)
The LWI is a wiring harness installed inside the laundry machine and interfaces with the
machine controller. There are several models of LWIs to support machines from different
manufacturers and model types.
LAUNDRY SYSTEM INSTALLATION OVERVIEW
1Configure BbTS (See System Administrator Guide).
2LC3000 Laundry Reader Installation (page 10)
3LC3000 Laundry Reader Configuration (page 12)
4Wired Laundry Machine Interface Installation (page 16) or
Wireless Laundry Machine Interface Installation (page 23)
6
5
4
3
2
1
RED
WHT
BLK
Laundry Machine
RED
WHT
BLK
INSTALL AND CONFIGURE LC3000
Laundry Installation and Setup Guide 10
INSTALL AND CONFIGURE LC3000
INSTALL AND CONFIGURE LC3000
LC3000 LAUNDRY READER INSTALLATION
Select a mounting method based on the application and the network mode of the reader. The LC3000 enclosure is
designed to mount on a wall: it can be flush-mounted (wiring can come from the interior of the wall); or it can be
surface-mounted (wiring can run through conduit on the exterior of the wall).
LC3000 Mounting Location Considerations
Use the following criteria to select the best mounting location for the LC3000:
Connect to 120 VAC @ 60 Hz. Connect only to a 15A maximum branch circuit protection or equivalent.
Use a circuit breaker or switch to disconnect power when installing or removing the LC3000.
• 120VAC power availability
• Network communications availability (RS-485 or 10/100 Base T)
• Wiring distance limitations
RS-485 Communications 4000' total per loop
10/100 Base-T Communications 300'
• Ease of cable routing to Laundry machines (if wired configuration)
• Installation height regulations
Mounting Requirements
Mounting hardware, .25” appropriate to surface.
Inhaltsverzeichnis
Beliebte Waschmaschine Handbücher anderer Marken
LAUNDRY JET
LAUNDRY JET Plus Bedienungsanleitung
LG
LG WKGX301H A Series Bedienungsanleitung
Kenmore
Kenmore Kenmore 27" Wide LAUNDRY CENTER Washer -... Bedienungsanleitung
LG
LG WK X30 Series Bedienungsanleitung
Frigidaire
Frigidaire GLEH164DS1 Administratorhandbuch
Frigidaire
Frigidaire GLEH1642DS0 Administratorhandbuch
