BlastKing CLUB Series Bedienungsanleitung
1
blastking.com
USER MANUAL
D1600.2
CLUB SERIES
CLASS D AMPLIFIER
blastking.com
2
Thank you for the purchase of your BLASTKING CLUB Series Power Amplifier.
We know you have a world full of choices and we thank you for selecting us.
Please read this entire user manual before operating this unit
CAUTIONS
• All operating instructions should be read before using this equipment.
• To reduce risk of electrical shock, do not open the unit. There are NO USER OR SERVICEABLE PARTS INSIDE. Please refer servicing to a qualified service
technician. Opening the unit without the manufacturer authorization will void the warranty.
• Do not expose this unit to direct sunlight or a heat source such as a radiator or stove.
• Dust, dirt and debris can interfere with the performance of this unit. Make an effort to keep this unit away from dusty, dirty environments, and cover the unit when
it is not in use. Dust it regularly with a soft clean brush.
• DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
• DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.
All BlastKing® products purchased in the USA are protected under the regular manufacturer’s three year warranty.
This warranty is intended to protect customers from any and all manufacturer defects from three years of purchase.
The product will be replaced or repaired at the manufacturer’s discretion upon receipt of the warranted unit along with a dated proof of purchase from an authorized
dealer or distributor. This warranty becomes null and void under situations including but not limited to misusage, normal wear and tear, shipping damage and abuse.
For international purchases, please contact your local dealer or sales associate for further warranty information.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
For manufacture warranty please register this product online at
http://blastking.com/product-registration/
This manual does not contain all the information about the design, production and changes of the equipment, and does not cover all the conditions that may occur
during installation, use and maintenance.
The information provided in this manual is accurate at the time of delivery. It may have changed due to product updates.
3
blastking.com
FRONT PANEL AND REAR PANEL FUNCTION INDICATOR DIAGRAM
Front Panel
Rear Panel
Voltage Switch Selector
Signal Indicator Power Switch
RP-Volume Control
Signal Input
Stereo Bridge
Switch Crossover Switch
Power Output
Power Cord
SPM
Self Protection Mode
Ready Indicator
4
PROTECT FUNCTION
Overload Protection
The Club Series is equipped with Blastking’s proprietary SPM (Self Protection Mode) technology which protects the
output power against damage.
When the amplifier channel output current exceeds its specified peak current output, the current will be limited by the
protector to work within the specified range.
In the event the amplifier channel current output exceeds its specified peak current output, the amplifier will be
disabled (muted) for 1000ms and automatically re-start after the short circuit state disappears.
Overload Voltage Protection
When the working voltage exceeds the maximum working voltage or lower than the minimum working voltage, the
amplifier enters intp protection mode, and turns off the power supply.
Note: Working over 240 Volts AC for a long period of time may cause power damage.
Power Control
The Club series power amplifier supports power output control: according to the panel setting power, the connected
speaker can be operated safely and reliably within the power requirements.
5
blastking.com
BLOCK DIAGRAM
6
TYPICAL CURVE
Frequency Response: 4 Ohm (Yellow), 8 Ohm (Red) and open load (Magenta)
Phase Response: 4 Ohm (Magenta), 8 Ohm (Yellow) and open load (Red)
7
blastking.com
TYPICAL CURVE
THD+N vs Pro 100Hz @ 4 Ohm (Red)
THD+N vs Pro 100Hz @ 8 Ohm (Red)
8
Technical Information
Output Power (8 Ohm) 1000W x 2
Output Power (4 Ohm) 1600W x 2
Output Power Bridge (8 Ohm) -
Output Circuit Type CLASS D
Input Impedance 10K Ohm
Frequency Response 20Hz-20KHz
THD 20hz~20khz(8 Ohm) 0.1%
Slew Rate 40V/usec
Hum And Noise 100dB
Damp Modulus (8 Ohm) >200
Radiator High/Low Automatism Control
Protection Equipped with Blastking’s Proprietary SPM Self Protection Mode Technology
Weight 12.6 Lbs / 5.75 kg
Dimension 19” x 12.2” x 2.5” / 483 x 328 x 64 mm (1.5U)
Power Range 110V / 220V Switchable
SPECIFICATIONS
STRUCTURAL MOUNTING DIMENSIONS
17.2” / 438 mm
12.2” / 310 mm
19” / 483 mm
2.5” / 64 mm
12.9” / 328 mm
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere BlastKing Verstärker Handbücher
