Blastrac BMS-220 ADB Bedienungsanleitung
OPERATING MANUAL BMS-220 ADB
VERSION 1.5
FOR MORE INFORMATION VISIT WWW.BLASTRAC.COM
Design and technical specifications may be subject to changes
Table of contents
1.
Introduction 03
2.
Machine description 03
3.
Safety 05
Safety precautions - general
Safety precautions - with regard to transport
Safety regulations – with regard to maintenance
- Hydraulicsafe operation
- Electric safe operation
4.
Initial operation 08
Checkpoints of safety
5.
Operation 09
Starting / stopping the machine
Battery operation
Charger operation
6.
Maintenance 16
Hydraulicsystem instruction
Blades and cutting head
7.
Blades application 22
8.
Technical data 29
2
1. Introduction
It is important that all persons who are working or maintaining this machine read the manual carefully and
understand it fully.
Keep this manual near to the machine, so it can always be consulted.
Only authorized and trained personnel may operate this machine.
2. Machine description
The Blastrac BMS-220ADB ride-on stripper is ideally suited for medium and large sized applications with the
added benefit of being battery operated for increased versatility. It is very maneuverable with zero turn radius,
non-mark tires and complete hydraulic control.
Main assets ofBMS-220ADB:
- fast and easy removal of all kind of flooring material
- very compact, goes through standard doors & elevators
- zero turn radius, ergonomic design for safe maneuvering, non –marking tires
- very versatile, total freedom of movement, no electric cable.
- complete hydraulic control ( drive and tool control )
- powered by a high-duty battery, running time up to 10 hours
- very high output compared to manual material removal.
4
1 Tool holder 9 Left wheel handle
2 Blade holder 10 Tool position handle
3 Electro box 11 Right wheel steer handle
4 ON/Off key 12 Adjustable seat
5 Battery discharge indicator/hour meter 13 Charger connection
6 Emergency shut down 14 Oil filter
7 Batteries set 15 Wheel scrapers
8 Box with drive unit (motor with pumps)
5
3. Safety
It is important that all persons who are working with or maintaining this machine must read the manual
carefully and understand it fully.
Keep this manual always with the machine, to enable it to be referred to at any time
Safety precautions
Make sure that persons who are not operating the machine are not in the surrounding area of 5 meter
of the machine.
Make sure that there is nothing standing or situated on the surface to be treated
Make sure that there are no cables or hoses in the driving direction of the machine.
Always drive backwards when driving up to a ramp or grade, and forwards when driving of the ramp.
Don’t get disturbed during the activities.
Safety regulations
Never change anything from the safety devices on the machine!
Persons who are not operating the machine must not be permitted to stay in the surrounding area of 5
meter of the machine.
Don’t change anything on the machine. Always use cables for charger which are approved and safety
earthed, including extension cables. The charger is always equipped with an earthed connection, do
not change this and use always earthed cables with an earthed plug.
Connect the main power supply cable of charger to an installation with an earth leakage circuit
breaker.
Inspect and test the electrical components regularly. The electrical components have to satisfy to the
requirements which apply to these components.
Always call a skilled electrician or your distributor when you have questions about the safety of the
electrical components.
Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or
by trained persons under the guidance and supervision of a skilled electrician as well as in accordance
with the electrical engineering regulations.
Pull out the main plug of the charger and the electrical panel during inspections and repairing on the
machine.
The following sticker is placed on the machine.
Meanings of these symbols are:
Ear protection is obliged
Safety glasses with lateral protection are obliged
CE-mark on this machine
Safety shoes obliged
Consult the manual before operating the machine
Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
Wear gloves and dust mask during operating the machine.
6
Safety instructions
Turn key to OFF and press Emergency shut down when changing the blade or during repairs on the
machine.
Turn key to OFF and press Emergency shut down when machine is parked.
oPark the machine always on a flat horizontal and levelled surface.
oCover the sharp blade or remove it when park the machine.
Make sure the machine is clean and that the footrests are dry and free of grease and oil.
NEVER lift machine with mounted tool! This sharp tool can be very dangerous!
The weight of the BMS-220 is 1080 kilogram. Use preferably appropriate appliances as a lift or crane.
Use the existing lifting points to lift the machine.
Chock wheels for transport and keep control handles in neutral position.
Don’t leave the machine unsecured on jobsites.
Machine can be lifted by a forklift. For this use prepared bracket (1)on bottom of machine:
7
Be aware of your surroundings and machine operating level. Do not side hill, do not run on steep
incline, this could cause machine to tip over.
Always drive backwards when driving up to a ramp or grade, and forwards when driving of the ramp.
Do not run the machine in unsafe environments.
8
4. Initial operation
Before using the machine it is essential to inspect the machine every day.
It is not permitted to use the machine if the machine safety is not according the checkpoints below.
Checkpoints of electrical safety:
Check if the power supply cable of the charger is unplugged and the cable is stored into the machine.
Any damage to electric cables is not permitted
Checkpoints of machine safety:
Check if:
Control levers should be in neutral position .
All hydraulic hose connections are tightened and there is no leakage of oil.
The safety functions and operating functions work correct.
There are not any loose nuts or bolts.
9
5. Operation
During operating the BMP-4000, the following additional safety instructions must be followed closely.
Switching on the machine
Take place on the seat (4) and put foots on the footrests. Operating the machine is not possible
because of the safety switch of the seat.
Pull out the emergency switch (3).
Turn the key contact switch (1) to the right.
Check battery power on discharge meter.
10
Driving the machine
The drive of the machine is controlled by the two outside handles (1 and 3). Pushing both handles forwards,
the machine drive forwards. Pulling both handles backwards, the machine drive backwards. The driving speed
depends on the position of the handles. Pushing the right handle forwards the machine turns to the left.
Pushing one handle forwards and pulling another handle backwards the machine will turns around its axis.
Correcting direction while moving is accomplished by slightly reducing pressure on one handle or the other
while moving.
1) Left wheel control handle.
2) Tool positioning control handle.
3) Right wheel control handle.
11
Andere Handbücher für BMS-220 ADB
1
Inhaltsverzeichnis
Andere Blastrac Elektrowerkzeuge Handbücher
