Blaupunkt Phoenix CM 127 Bedienungsanleitung

Phoenix CM 127

(EU)

Radio / Cassette

Operating instructions

DEUTSCH

ENGLISH

ESPAÑOL

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Table of contents

Features......................................................................................................................................... 36

Traffic safety and precautions........................................................................................................ 36

Detachable face (release panel).................................................................................................... 37

Location of controls........................................................................................................................ 38

General operation .......................................................................................................................... 39

Audio operation.............................................................................................................................. 40

Radio operation ............................................................................................................................. 41

Cassette tape player operation...................................................................................................... 42

CD changer operation (when optional CD changer is connected)................................................. 43

Specifications................................................................................................................................. 44

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr35

Features

•Radio features

-15 FM/5 AM presets, including 5 FM and 5 AM Travelstore presets

-Station scan

-Local/distant seek and manual tuning

•Cassette tape player features

-Autoreverse cassette mechanism

-True fast-forward/rewind

-Radio Monitor

-Dolby B NR

•CD changer control features (optional)

-CDC-A 05, CDC-A 071 changer control

-Track up/down, disc up

-Track/disc scan, repeat, track mix

-Cue/review, pause/play

•Audio features:

-30 watts x 4 channel integrated amplifier

-2-channel preamp output

-Adjustable maximum turn-on volume

-Bass, treble, balance and fader control

-Loudness button

-Mute button

•Other features:

-Detachable face (release panel)

-Illumination, green

-Clock recall

-179 x 50 x 150 mm DIN/ISO chassis

-Detachable wire harness

-Snap-in DIN sleeve and mounting hardware

Your unit’s detachable front faceplate makes the unit useless to would-be thieves.

Designed, engineered and manufactured by Blaupunkt.

Traffic safety and precautions

•Do not adjust your unit in difficult driving conditions that demand your full attention.

•As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation

at all times. Never use your unit in a way that could distract you.

•Always make sure that you are still able to hear any warning signals coming from outside of

the vehicle, such as police or fire engine sirens, so that you can react accordingly.

•If your vehicle was parked in direct sunlight resulting in a considerable rise in temperature

inside the vehicle, allow the unit to cool off before operating it.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr36

DEUTSCH

ENGLISH

ESPAÑOL

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Detachable face (release panel)

Detaching and attaching the face:

The face of this unit can be detached and taken with you to prevent it from being stolen.

Detaching the face:

Press the REL (release) button and detach the face by gently pulling it off as illustrated.

Note: Do not pull it straight out from the chassis. Be sure not to drop the face when detaching it

from the chassis. Do not expose the face to direct sunlight, heat sources such as hot air ducts or

leave it in a humid place.

Attaching the face:

Apply the right hand side of the face to the chassis by sliding (part B) of the face to (part A) at

the front of the chassis. Gently push the left side of the face against the front of the chassis until

it snaps into place.

Note: Do not press against the display window. Do not press hard against the face when

attaching it to the chassis, it may be easily attached with gentle pressure.

Affixing faceplate for retail display:

The faceplate can be affixed to the unit’s chassis, which is desirable for a retail display, for

example.

To affix the faceplate:

Insert the black bolt into the hole at the left front of the top of the radio. See * below.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr37

Location of controls

1REL (Release) – Detaching faceplate

2ON (Power) – Power on/off

3SRC –Source and radio band select

4–Cassette eject

5–Mute

AUDIO –Access to bass, treble, balance and fader adjust

6SCA –Scan / disc scan and track scan

TS –Travelstore

7LD –Loudness

SENS –Tuning sensitivity

8Cassette insertion slot

9CLK –Clock adjust access / clock recall

DISP –Display change

10/11 PROG –Tape program change (reverse)

10 FR –Fast rewind

11 FF –Fast forward

12 + –Volume + / bass + / treble + / balance left / fade to front

13 – –Volume - / bass - / treble - / balance right / fade to rear

14 –Seek and manual tuning / clock hours / track up / cue

15 –Seek and manual tuning / clock minutes / track down / track repeat /

review

16 DISC –Disc up

17 PAUSE –Disc pause

18 RPT (Repeat) – Disc and track repeat

19 MIX –Track repeat at random

20 –Dolby B NR (noise reduction)

21 1, 2, 3, 4, 5 –FM/AM presets

22 Display –Display

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr38

DEUTSCH

ENGLISH

ESPAÑOL

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

General operation

See “Traffic safety and precautions” on page 36.

“Press”

means a momentary press of less than 1/2 second. All presses requiring more than

1/2 second are followed by a beep.

“Time Out”

When additional button presses are anticipated to complete a procedure, the unit will

automatically exit the procedure after 4 seconds of inactivity.

Ignition on

The unit lights up and the clock is displayed, provided it has been set before. Otherwise, “12:00”

appears. How to set the clock is described under “Setting the clock”.

Power on

When the ignition is on, press ON or insert a tape to turn the unit on. The last-used source

becomes active, unless the unit is turned on by inserting a cassette, in which case the cassette

player becomes active.

Setting the clock

Turn the unit on. Press and hold the CLK button until the clock starts blinking. Once the clock

starts blinking, press the button to set the hour, and press the button to set the minutes.

Press the CLK button again to activate the clock.

Audio source

Use SRC to select the disired audio source. AM, FM1, FM2, FMT, cassette (if already inserted)

and CD changer (if connected) will be activated one after the other.

Changing the information displayed

You can temporarily change the information shown in your unit’s display. You can also select

which information has “display priority” and is shown in the display. When pressing a button, the

display will always switch to the selected mode.

•To change the display priority, press the DISP button for two seconds. The display priority

changes. The display priority choices are radio frequency, “TAPE 1” or “TAPE 2”, track or

CD number (when optional CD changer is connected) and the clock.

•To change the display temporarily, press and release the DISP button to access the desired

information. After four seconds, the display changes back to the priority information.

Power off

Press ON for more than 1/2 second to turn the unit off.

Release for detachable faceplate

Push REL to detach the face. A cassette already inserted remains in the unit. The current

settings and the source mode are stored. If power was not switched off before you removed the

face, the unit will automatically power-on when the face is reattached.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr39

Audio operation

Volume control buttons

Press + and – to increase/decrease the volume from 0 to 63.

Adjustable maximum turn-on volume

Press and hold the ON button for more than two seconds. The unit turns off and the turn-on

volume level is memorized.

Mute

Press to temporarily reduce the volume. “MUTE” appears. Mute is terminated by pressing any

button.

Bass, treble, balance and fader

•Bass

Hold down the AUDIO button until “BASS” appears and then press immediately +or –to

increase or decrease the bass in intervals between 7 and -7.

•Treble

Hold down the AUDIO button until “BASS” appears. Then press AUDIO once again so that

“TREb” appears. Now press immediately + or – to increase or decrease the treble in

intervals between 7 and -7.

•Balance

Hold down the AUDIO button until “BASS” appears. Then press AUDIO twice so that “BAL”

appears. Now press immediately +or –to adjust the left/right volume between 9 (left) and -9

(right).

•Fader

Hold down the AUDIO button until “BASS” appears. Then press AUDIO three times so that

“FADE” appears. Now press immediately +or -to adjust the front/rear volume between 9

(front) and -9 (rear).

Loudness

Press LD to boost the low frequencies for a more natural sound. The “LOUD” icon appears. To

cancel, press LD again.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr40

DEUTSCH

ENGLISH

ESPAÑOL

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Radio operation

Selecting the waveband/memory bank

Press SRC repeatedly to access the modes FM1, FM2, FM3/FMT (FM banks 1-2-3,

T=Travelstore), AM/AMT (AM bank and AM Travelstore).

Tuning sensitivity

Press SENS for more that 2 seconds to switch between lo and dx search sensitivity (for local

and distant stations). In general, set SENS to lo when in metropolitan areas or where stations

tend to be strong and local (“lo” appears), and to dx if in rural areas or where stations tend to be

weak and distant.

Seek tuning

Press or to seek next receivable frequency. Tuning stops at the next frequency that fulfils

the sensitivity requirements predetermined.

Manual tuning

To activate manual tuning press and hold or until you hear a beep. Press or again and

the frequency will go one channel/step in the direction pressed. Press and hold causes

continuous manual tuning. The manual tuning mode has to be reactivated after 4 seconds or

after storing a station on a preset.

Preset station storage

After tuning to the desired radio station on the desired band, press and hold a preset button for

more than 2 seconds to store the current frequency. Audio is muted during the storage, the

preset number appears, and a beep acknowledges the storage. The number of the selected

preset appears in the display.

Travelstore

Press TS for 2 seconds to activate FM or AM Travelstore. “TS” appears. Beginning at the

bottom of the band, TS stores the five strongest stations sorted according to the signal strength

and returns to preset 1.

Preset station selection

Press desired preset button.

Station scan tuning

Press SCA. The frequency blinks during scanning. The unit stops at receivable stations for

4seconds. The unit continuously scans until the user stops scan by pressing SCA.

Radio reception hint

When listening to weak or distant AM stations, adjusting the treble to minimum (-7) will reduce

noise and improve sound.

Stereo symbol

The stereo symbol “ ” turns on if a stereo station with a sufficiently strong signal is received.

The unit gradually switches between mono and stereo automatically.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr41

Cassette tape player operation

Tape playback:

Insert the tape into the slot. (Note: make sure the open side faces to the right.) When the ignition

is on, the unit turns on by inserting a tape. Tape playback will start when the cassette is

inserted. “LOAD” will briefly appear in the display. If “TAPE 1” appears, side 1 or A of the tape is

played. “TAPE 2” stands for side 2 or B.

Ejecting the tape

Press the button completely towards the face of the unit. The tape will eject. If the unit is

turned on, “EJ” will briefly appear in the display and the last-heard radio station will play.

Tape program change

•Automatic change (autoreverse): When the end of the tape is reached, the unit will

automatically reverse the direction and play the other side of the tape.

•Manual change: To manually reverse the tape direction, press both PROG (program)

buttons (FR and FF) at the same time.

Fast winding

•To fast-rewind the tape, press the FR button. Tape rewinds and “ ” blinks in the display.

•To fast-forward the tape, press the FF button. Tape fast-forwards and “ ” blinks in the

display.

•To stop fast-winding, press the other fast winding button, FR or FF.

Radio Monitor

During tape winding, the radio will play the most-recently heard radio frequency. All frequencies

stored on the current bank of preset stations are accessible during fast winding.

Dolby B NR*

With this unit you can play back tapes recorded with Dolby B NR or without noise reduction.

Cassette tapes recorded with Dolby B NR stand out by their reduced tape hiss and the improved

dynamics. If Dolby B NR is switched on, “ ” will light up in the display. To switch on/off: Press

the button.

*Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation.

Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr42

DEUTSCH

ENGLISH

ESPAÑOL

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

CD changer operation

(when optional CD changer is connected)

Your radio is ready to control the Blaupunkt CD changer CDC-A 05 or CDC-A 071 with the Disc

Management System. The CD changer is not included in the delivery. See your Blaupunkt

dealer for more information.

Make sure that at least one CD is inserted in the magazine. Press SRC until, for example,

“T 1 d 1” appears to indicate that track 1 and disc 1 will be played.

Track up/down

Press to select tracks in upward direction. The display will show the new track number.

Pressing while the last track is played selects the next disc. Press twice or several times to

select a track in downward direction. Press more than 1 second to repeat the current track.

Disc up

Press DISC to select the next CD. The new disc number appears. Hold down DISC to speed up

the selection.

Cue and review

Press and hold down the or button for audible cue and review.

Track repeat

Press RPT once to repeat the current track. The display will show “rPT” and the current track

number. Pressing RPT twice cancels the track repeat function. “PLAY” will briefly appear.

Disc repeat

Press RPT twice to repeat the current disc. The display will show “rPTd” and the current disc

number. The disc will be repeated when all tracks on the CD have been played. Pressing RPT

once cancels the disc repeat function. “PLAY” will briefly appear.

Track mix

Press MIX once to play all tracks on the disc at random. The display will show “rdM” and the

current track number. When each track of the disc has been played at random, the unit will

automatically select the next disc. Press MIX twice to cancel the track mix function. “PLAY” will

briefly appear.

Disc mix

Press MIX twice to play tracks and discs at random. The display will show “rdMd” and the

current disc number. Pressing MIX once cancels the disc mix function. “PLAY” will briefly

appear.

Pause

Press PAUSE to interrupt playback. “PAUSE” will appear. Press PAUSE again to continue

playback.

Track scan

Press SCA to scan all tracks for 10 seconds each. The track number will flash in the display.

When all tracks of the disc have been scanned, the unit will start scanning the next disc. Press

SCA again to cancel the track scan function.

Disc scan

Press SCA for more than 2 seconds. The disc number will flash in the display. The unit starts

scanning the first track of each disc for 10 seconds. Press SCA again to cancel the disc scan

function.

Changer reset

In the unlikely case of CD changer malfunction, reset the CD changer by turning the unit off and

on.

Phoenix CM 127 (EU) gb® 02.05.2002, 11:41 Uhr43

Inhaltsverzeichnis

Andere Blaupunkt Autoempfänger Handbücher

Blaupunkt

Blaupunkt Fiat Scudino Mid Bedienungsanleitung

Blaupunkt

Blaupunkt GRENOBLE RD 169 Bedienungsanleitung

Blaupunkt

Blaupunkt RPD A8000 Bedienungsanleitung

Blaupunkt

Blaupunkt Bremen RCM 43 Bedienungsanleitung

Blaupunkt

Blaupunkt SEVILLA RD 126 Bedienungsanleitung

Blaupunkt

Blaupunkt BARCELONA 230 Bedienungsanleitung

Blaupunkt

Blaupunkt Munchen RD 104 Bedienungsanleitung

Blaupunkt

Blaupunkt ORLANDO 750 Bedienungsanleitung

Blaupunkt

Blaupunkt RPC430 Bedienungsanleitung

Blaupunkt

Blaupunkt Pure Coaxial 66.2 Bedienungsanleitung

Blaupunkt

Blaupunkt Rivera 4011 Bedienungsanleitung

Blaupunkt

Blaupunkt Boston RCC 45 Bedienungsanleitung

Blaupunkt

Blaupunkt Pueblo CR45 Bedienungsanleitung

Blaupunkt

Blaupunkt Palma 200 DAB BT Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot Rome NAV55E Bedienungsanleitung

Blaupunkt

Blaupunkt SEVILLA MP38 Bedienungsanleitung

Blaupunkt

Blaupunkt San Diego MP27 Bedienungsanleitung

Blaupunkt

Blaupunkt Arizona CM148 Bedienungsanleitung

Blaupunkt

Blaupunkt HOKKAIDO 110 Bedienungsanleitung

Blaupunkt

Blaupunkt Kingston MP47 Bedienungsanleitung

Blaupunkt

Blaupunkt Cupertino 220 Technisches Datenblatt

Blaupunkt

Blaupunkt Casablanca 2012 Bedienungsanleitung

Blaupunkt

Blaupunkt MIAMI Miami CD72 Bedienungsanleitung

Blaupunkt

Blaupunkt MEMPHIS MP66 Technisches Datenblatt

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung