Blendtec Brawn Bedienungsanleitung

MANUAL

ABC SMOOTHER SPACESAVER

Table Of Contents

Section Page

Section 1.....Important Safeguards 5

Section 2.....Component Overview 7

Section 3.....Unpacking 9

Section 4.....Installation 10

Section 5.....Operating Instructions 12

Section 6.....Warranty and Service 16

Appendix A.....ABC Operation 18

Appendix B.....Product Diagrams 21

SECTION 1 – IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS CAREFULLY BEFORE USING YOUR

BLENDTEC MACHINE.

1.1 SAFETY CERTIFICATION

The ABC, Smoother, and SpaceSaver

blenders and accessories are certied by ETL

to UL standard 763, and to CSA standard C22.2 No.

195-m1987, and to CE Standards.

1.2 HEALTH CERTIFICATION

The ABC, Smoother, and SpaceSaver

blenders and accessories are certied by

NSF International.

1.3 AVOID CONTACT WITH MOVING PARTS

● Keep ngers, hands, hair and clothing away from all moving parts.

● Keep all utensils away from the drive socket and blender blades during

operation. Metal utensils will damage blades.

·NEVER put hands into blender jar or add substances by hand when

blender is operating.

·NEVER place jar into drive socket if blender motor is operating.

·Do not rock the blender when it is operating. Keep the blender jar

straight up until the operation is complete.

● These precautions will prevent personal injury and/or damage to the

blender.

1.4 POWER CORD PRECAUTIONS

·Do not operate with a damaged cord or plug.

·If the supply cord is damaged, it must be replaced by the manufacturer

or its service agent in order to avoid a hazard.

·Do not let the cord hang over the edge of the work surface.

·Never use an extension cord with the unit.

·Unplug the blender motor before removing from sound enclosure,

changing blender locations, or cleaning.

1.5 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender base cover. The blender base does not

contain self-adjustable or serviceable parts. All service and adjustments

must be made by a qualied service agent. Removing the cover or

attempting to service the blender will void the warranty.

1.6 TURN THE UNIT OFF WHEN NOT IN USE

1.7 THE 110/120 VOLT RECEPTACLE FOR EACH POWER UNIT MUST

BE PROTECTED BY A SEPARATE 20 AMP CIRCUIT BREAKER OR FUSE.

THE 220/240 VOLT RECEPTACLE FOR EACH POWER UNIT MUST BE

PROTECTED BY A SEPARATE 13 AMP CIRCUIT BREAKER OR FUSE.

Do not use any other electrical equipment on the same circuit as

the blender or you risk overloading the circuit and either damaging

the blender electronics or blowing the circuit protection.

1.8 NEVER OPERATE IF THE UNIT APPEARS DAMAGED

If the blender malfunctions call the service agent rst. If it is dropped

or damaged in any way, return the blender to a Blendtec service agent

immediately for examination, repair, electrical or mechanical adjustment,

or possible replacement.

1.9 NEVER OPERATE IN LIQUID

Do not operate the blender motor in water or any other liquid. Avoid

any contact between the motor and water. Deliberate use of machine

outdoors in conditions where precipitation is present will void the

warranty.

1.10 NEVER PUT ITEMS SUCH AS METAL, ROCKS, OR OTHER

HARD MATERIALS INTO BLENDER JAR

Metal utensils and other hard materials are dangerous. They can cause

injury or damage. Damage caused by such foreign objects will void the

warranty.

1.11 NEVER OPERATE USING ATTACHMENTS NOT SOLD BY

BLENDTEC

The use of unauthorized attachments voids the warranty and may cause

re, electric shock, or injury.

1.12 ALWAYS SECURE THE BLENDER LID BEFORE STARTING THE

MACHINE

Even if you have a sound enclosure, make sure you place a lid on the

blender jar before you close the cover.

1.13 AVOID TOUCHING THE METAL BASE AFTER EXTENSIVE USE

The metal base of the blender may become hot after numerous cycles.

1.14 BLADES ARE SHARP! HANDLE CAREFULLY

1.15 When blending HOT LIQUIDS, remove center plug of lid.

1.16 NEVER CLEAN THIS UNIT WITH A WATER JET.

1.17 THE POWER CORD RECEPTACLE WHICH POWERS THE

BLENDER MUST ALWAYS BE ACCESSIBLE.

SAVE THESE INSTRUCTIONS

SECTION 2: COMPONENT OVERVIEW

2.1 BLENDER MOTOR

The blender motor consists of the blender base shell, touch pad control,

Liquid Crystal Display (LCD) information center, and the power unit.

(See Figures 1.1 and 1.2)

●

·Motor housing: Houses the power unit in a general stainless steel casing.

Never remove the motor cover. Removal of the motor cover will void the

warranty.

●

·Touch Pad: Consists of six buttons which contain pre-programmed

settings as well as a pulse for selective blender control.

●

·LCD Information Center: When a cycle is completed, the display

increments the cumulative cycle for warranty purposes. It also indicates

overload or over-temperature conditions.

●

·Blender Motor: This unit is located within the motor housing and

contains the machinery which runs the blender, including the electric

motor, drive train, and computerized control board.

2.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly,

and lid. The blender jar assembly integrates these components to

ensure consistently blended drinks and greater operator safety.

●

Jar: Made from polycarbonate to provide maximum performance as

well as clear visibility of blender performance.

●

Blade Assembly: Stainless steel, designed to ensure fast, consistent

blending.

●

Lid: Designed to provide ease of handling and quick removal for high

speed operations.

2.3 OPTIONAL SOUND ENCLOSURE

The sound enclosure reduces noise created during blender operation.

2.4 OPTIONAL SOUND ENCLOSURE BOTTOM

A “top-of-the-counter” version of the blender is created by combining the

sound enclosure described above with a sound enclosure bottom into

which the blender motor is inserted. This allows for portable operation of

the blender.

2.5 POWER SPECIFICATIONS

Blendtec Blenders are made with power specications listed below

according to your specic model.

110/120 VOLT BLENDTEC BLENDERS ARE REQUIRED

TO BE PROTECTED BY A DEDICATED 20 AMP

CIRCUIT BREAKER OR FUSE.

MODEL (110/120 VOLT) AMPS WATTS

ICB7 (Smoother20) 20 2400

ICB5 (Smoother18) 18 2000

ICB4 (Smoother15, SpaceSaver15) 15 1800

ICB3 (Smoother13, SpaceSaver13) 13 1500

ABC5 (ABC18) 18 2000

ABC4 (ABC15) 15 1800

ABC3 (ABC13) 13 1500

220/240 VOLT BLENDTEC BLENDERS ARE REQUIRED

TO BE PROTECTED BY A DEDICATED 13 AMP

CIRCUIT BREAKER OR FUSE.

MODEL (220/240 VOLT) AMPS WATTS

ICB5 (Smoother18) 9 2000

ICB3 (Smoother13, SpaceSaver13) 6.5 1500

ABC5 (ABC18) 9 2000

ABC3 (ABC13) 6.5 1500

SECTION 3: UNPACKING

SAVE THE TWO FOAM INSERTS AND ALL PACKAGING FOR FUTURE

STORAGE OR SHIPPING. SAVE THESE INSTRUCTIONS FOR

FUTURE REFERENCE.

3.1 UNPACKING YOUR BLENDER

1. You should have received the following items:

·Model ICB or ABC Blender Base

·Blender Jars (2), Lids (2)

·Sound Enclosure (optional)

●

·Additional Blender Jars (optional)

2. Remove blender motor, sound enclosure components, blender jars

and lids from carton.

3. Unwind the power cord.

4. Check for and remove any packing material which may have blocked

ventilation holes in either the power unit or the black motor stand.

5. Inspect all items to ensure no damage occurred in shipment.

6. If any damage has occurred contact your Blendtec service agent

immediately.

3.2 RECORDING YOUR SERIAL NUMBER AND DATE OF SHIPMENT

Record your blender base serial number and date of purchase in the

space below. You will need these when contacting Blendtec for service.

Blender Serial No. ____________________________________

Date of Purchase ___________________________________

Refer to these whenever contacting your Blendtec service agent.

SECTION 4: INSTALLATION

4.1 Above Counter Installation

(For SpaceSaver model, disregard mention of sound enclosure)

1. Insure that an electrical receptacle is readily accessible when you

locate the equipment.

2. Be sure the unit is switched off and unplugged. Remove the lid (top)

of the sound enclosure by either sliding the piano hinge pin out of the

hinges. (For the Q Series model, lift the top straight off the bottom to

remove.) Lay the sound enclosure top and the hinge pin aside.

3. Route the power cord from the top through the bottom of the clear

sound enclosure bottom and insert the motor carefully into the opening

in the bottom of the sound enclosure base. Be sure the rubber gasket ts

smoothly and tightly into the plastic base.

4. Slide the power cord and the motor into the black plastic sound

enclosure base with the touch pad facing the front, tting the motor and

clear sound enclosure bottom snugly into the black base. Extend the

cord out the bottom of the base to its full length.

5. Set the equipment on the counter and re-install the clear sound

enclosure top.

6. Insure clearance above the counter around the installation to allow for

unhampered operation of the sound enclosure.

4.2 Preparation for In-Counter Installations

1. Identify desired blender location. Consider preferences such as

proximity to ingredients, how close you want to be to customers, and

available counter space.

2. Ensure potential site meets all dimensional requirements. (See

Figures 3.1-3.3.)

● ·Counter top can be no thicker than 3/4 in (19 mm). A counter top

thicker than 3/4 in. (19 mm) will obstruct ventilation louvers on the upper

sides of the motor.

● ·If installing more than one blender, allow 14 to 16 in. (356 - 406 mm)

center-to-center blender spacing.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Blendtec Mixer Handbücher

Blendtec

Blendtec Professional Series Bedienungsanleitung

Blendtec

Blendtec Rapid Rinser Bedienungsanleitung

Blendtec

Blendtec DESIGNER SERIES Leitfaden

Blendtec

Blendtec HP3A Home Bedienungsanleitung

Blendtec

Blendtec Professional Series Leitfaden

Blendtec

Blendtec Xpress Bedienungsanleitung

Blendtec

Blendtec Signature Series Bedienungsanleitung

Blendtec

Blendtec Total Blender Classic Combo Bedienungsanleitung

Blendtec

Blendtec Go 41-503 Bedienungsanleitung

Blendtec

Blendtec CLASSIC SERIES Wildside+ Leitfaden

Blendtec

Blendtec ES3 Bedienungsanleitung

Blendtec

Blendtec CLASSIC SERIES Leitfaden

Blendtec

Blendtec BD8 Bedienungsanleitung

Blendtec

Blendtec Classic Bedienungsanleitung

Blendtec

Blendtec Total Blender Leitfaden

Blendtec

Blendtec STEALTH 895 Leitfaden

Blendtec

Blendtec Total Blender Leitfaden

Blendtec

Blendtec Stealth Bedienungsanleitung

Blendtec

Blendtec Total Blender Leitfaden

Blendtec

Blendtec DESIGNER SERIES Leitfaden

Blendtec

Blendtec Q-SERIES Bedienungsanleitung

Blendtec

Blendtec NITRO Blending Systems 2.0 Bedienungsanleitung

Blendtec

Blendtec TotalBlender DesignerSeries Leitfaden

Blendtec

Blendtec ez Blender Bedienungsanleitung

Beliebte Mixer Handbücher anderer Marken

ROTOR

ROTOR 1125.201 Bedienungsanleitung

Braun

Braun Multiquick 5 Vario series Bedienungsanleitung

ARENDO

ARENDO MIRA 305424 Bedienungsanleitung

CHEF-BUILT

CHEF-BUILT CCB-3500 Bedienungsanleitung

Viconte

Viconte VC-4406 Bedienungsanleitung

Oster

Oster BLSTAB-CB0 Bedienungsanleitung

HOFFEN

HOFFEN MC-3005 Bedienungsanleitung

Black & Decker

Black & Decker BLC18750DM Bedienungsanleitung

Sunbeam

Sunbeam 4182 Bedienungsanleitung

Bialetti

Bialetti FMX35 Bedienungsanleitung

Black & Decker

Black & Decker BL8000 Bedienungsanleitung

Duronic

Duronic BL530 Bedienungsanleitung

Exquisit

Exquisit MS 3002 wes Bedienungsanleitung

Lumme

Lumme LU-KP1891A Bedienungsanleitung

Binatone

Binatone HB-735 Bedienungsanleitung

Moulinex

Moulinex LM936E10 Bedienungsanleitung

Oster

Oster VERSA Installations- und Betriebshandbuch

Ninja

Ninja NN210Q Bedienungsanleitung