7
ENGLISHENGLISH
To enable or disable the enclosure safety feature, complete the
following steps:
1. Press for three seconds.
2. Press to scroll down to Settings. Press .
3. Choose Enclosure Safety Mode. Press to select.
4. Use to toggle between disable or enable Enclosure
Safety mode.
5. Press
Screen standby time
Standby mode can be adjusted to the following times:
(15 minutes, 1 hour, 6 hours or 12 hours).
To select a new standby time, complete the following steps:
1. Press for three seconds.
2. Press to scroll down to Settings. Press .
3. Press to scroll to Screen Standby. Press to select.
4. Press to scroll to desired standby time. Press to select.
5. Press the
Blend Cycle Pause setting
When in automatic mode, the Blend Cycle Pause setting allows
the user to pause and resume a blend cycle at the same time
and speed. To enable or disable the Blend Cycle Pause feature,
complete the following steps:
1. Press for three seconds.
2. Press to scroll down to Settings. Press .
3. Press to scroll to Blend Cycle Pause. Press to select.
4. Use to toggle between disable or enable Blend Cycle Pause.
5. Press
Language
The menu is available in three languages: English, French,
and Spanish. To select a language, complete the following steps:
Press for three seconds to enter the menu.
1. Press to scroll down to Settings. Press to select.
2. Press to scroll to Language. Press to select.
3. Press to scroll to desired language. Press to select.
4. Press
3.1.9 BLENDER STATISTICS
Blend cycle counts
To review the total of cycles run on the unit and the number of
cycles run on each button:
1. Press for three seconds to enter the menu.
2. Press to scroll down to Cycle Counts. Press to select.
3. Press to scroll through Cycle Counts.
4. Press
Note: The pulse count refers to pulse sets. For example, touching the
pulse button 5 times in a row will register as 1 pulse count. Touching
the pulse button, then a cycle number and then the pulse button will
register as 2 pulse counts.
Diagnostic error log
To review the diagnostic errors that have been logged on
the blender.
1. Press for three seconds to enter the menu.
2. Press to scroll down to Diagnostic Counts. Press
to select.
3. Press to scroll through error counts.
4. Press
Note: When the Blend Cycle Pause setting is enabled, a cycle can be
paused by pressing any button. If the Blend Cycle Pause function is
disabled, pressing any button will stop a blend cycle.
