Blitzz BWU613B Bedienungsanleitung

1

i
B5-MU-0007-20
Version:1.0, September. 2003
Copyright
All rights reserved. No part of this document may be reproduced in
any format or by any means without written permission from Blitzz
Technology Inc.
Changes are periodically made to the information in this document.
They will be incorporated in subsequent editions. The supplier may
make improvements and/or changes in the product described in this
document at any time.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

ii
Technical Support
Your NetWave Wireless LAN Adaptor is updated with the latest
technology to ensure the device is working properly. To keep updated
with technologies, please visit http://www.iBlitzz.com for more
information.
If you have difficulty resolving problems of installation or have
further technical questions, you can also go http://www.iBlitzz.com to
look for the latest FAQ or contact with us by following ways:
Web Site: www.iBlitzz.com
Toll Free: 1-888-iBlitzz (1-888-425-4899)
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

iii
Table of Content
Copyright i
Technical Support ii
Table of Contents iii
Chapter 1 Introduction 1
1.1 Product Overview 1
1.2 Product Features & Benefits 2
1.3 What is in the package 3
1.4 LED lights 4
1.5 Type of Wireless Networks 5
Chapter 2 Installation 6
2.1 System Requirements 6
2.2 Hardware Installation 8
2.3 Software Installation 7
2.3.1 Install Driver Only Installation – an alternative way to install driver 9
Chapter 3 Blitzz Wireless LAN Utility 10
3.1 For Windows XP Users 10
3.2 Installation 11
3.3 Blitzz Wireless LAN Utility 13
Chapter 4 Microsoft Wireless LAN Utility for Windows XP 16
4.1 If you want to use Blitzz Wireless LAN Utility 16
4.2 Basic Configuration 19
4.2 Advanced Configuration 25
Appendix
A1
A. Glossary A1
B. Product Specifications A6
C. Troubleshooting A8
D. Government Compliance Notices A9
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

1
Chapter 1 Introduction
1.1. Product Overview
The BWU613B 11Mbps IEEE 802.11b Wireless LAN USB Adapter is
a standard USB interface adapter integrated with wireless LAN
technology. It provides you the easiest, fastest way to access your
wireless and wired network. Its 11Mbps data rate gives equivalent
Ethernet speed to access corporate network or the Internet in a
wireless environment.
The BWU613B WLAN USB Adaptor is fully compliant with
IEEE802.11b communication standard and interoperable with any
WLAN components which using the same IEEE802.11b and 802.11g
technology. When installed, BWU613B Wireless LAN USB Adapter is
able to communicate with any 802.11 and 802.11b compliant
products. It makes your further device purchase easier when
expanding your network.
The Blitzz BWU613B WLAN USB Adaptor also provides powerful
features such as the Windows-based configuration utility, WEP security
and more. Maximize network efficiency while minimizing your network
investment and maintenance costs.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

2
1.2. Features and Benefits
The Blitzz BWU613B Wireless USB Adaptor provides the following
features:
Features 11Mbps data rate by incorporating Direct Sequence
Spread Spectrum technology.
Fully IEEE 802.11b compatible. Allow inter-operation among
multiple vendors.
Operates in the fast and reliable 2.4Ghz ISM band, without the
need for an FCC license.
Rate adaptive on 1, 2, 5.5 and 11 Mbps.
Working range up to 800 ft. in open environment.
Supports point-to-point and point-to-multipoint access.
Seamless roaming within the 802.11 & 802.11b wireless LAN
infrastructure.
Provides user authentication to enforce tight security.
Direct Sequence Spread Spectrum (DSSS) technology provides
robust, interference-resistant and secure wireless connection.
Supports Wired Equivalent Privacy (WEP).
Supports Plug and Play. Easy installation.
Wireless connection without the cost of cabling. Greater
flexibility to locate or move networked PCs. Easy to install and
friendly to user, just plug and play!
Provides Window-based Diagnostic, Statistics Tools and Traffic
Monitoring.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

3
1.3 What's in the package?
BWU613B Wireless LAN USB Adaptor
Quick Installation Guide
USB Cable
NetWave Driver & Utility CD
All packages have been checked carefully for their completeness
before shipped. Please contact the place of purchase if any of the
above listed items are missing or damaged.
If you encountered any difficulty in using this product while all the
above items are complete, please refer to Appendix C for
Troubleshooting information before making the decision to return
your Wireless LAN USB Adaptor to your dealer.
1.4 LED Indicators
The BWU613B Wireless USB Stick Adaptor has 1 status LEDs show
the wireless linking status and a foldable antenna.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

4
Function Behavior Definition
Dark Power Off
Green Wireless connection established
LED
Blinking Not connected.
1.5 Types of wireless LAN networks
There are two types of wireless network for this WLAN card, the
“Ad-Hoc mode” and the “Infrastructure mode”.
Ad-Hoc mode: Connecting to other computer with WLAN card. This
mode does not need AP to connect to each other.
Infrastructure mode: All wireless adapters are connected Via
“Access Point” (AP) to connect to the Internet. This mode further gives
wireless access to Internet or data sharing under a previously wired
environment. Comparing to Ad-Hoc mode, Infrastructure mode has the
following advantages:
• Longer distance: Through AP, the wireless access distance is
longer.
• Roaming: The wireless devices can move within the AP support
area.
• Integration of wired and wireless environment.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

5
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor

6
Chapter 2 Installation
Attention
Do not plug-in your BWU613B Wireless USB
Adapter yet. Although, you can install the driver
through traditional plug-and-play. We recommend
you install driver and Wireless LAN Utility by
following steps before hardware installation.
If you want to install the BWU613B driver only
without Wireless LAN Utility, please go section 2.5
Driver Installation directly for installation.
2.1 System Requirements
In order to use the BWU613B Wireless USB Adaptor, your
computer must be equipped with the following:
1. An available USB 1.1 socket.
2. Windows 98se/ME/2000/XP (with a Windows installation CD-
ROM, diskettes for use during installation)
3. Minimum 500 Kbytes free disk space for installing driver and
utility program.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor
Inhaltsverzeichnis
Andere Blitzz Adapter Handbücher


















