Blueair BA-01 Bedienungsanleitung
BlueAir
User manual
Set up and use instructions
for BlueAir adapter BA-01
1
Introduction
Thank you for purchasing a BlueAir Bluetooth audio adapter
The BlueAir Bluetooth audio adaptor opens a
whole new world of freedom and sponteneity for
leisure and informal public performances.
Equipped with your BlueAir audio adapter, you
can turn almost any musical or speaking oppor-
tunity into a performance. Whatever audio am-
plification equipment is available, from profes-
sional public address systems to guitar amplifiers
and even most computers or home entertain-
ment systems, you can connect your (or anyone
else’s) Bluetooth headset to make an instant live
sound system. The quality of audio reproduc-
tion is great for most small scale public engage-
ments, from pub entertainment to village fete
performances. Being extremely easy to use, the
adaptor is also ideal for impromptu or fun audio
amplification in the home or at parties.
The design is based on Bluetooth adaptors de-
veloped to allow Bluetooth headsets to be con-
nected to non-Bluetooth enabled mobile phones.
It should therefore work perfectly with essential-
ly any Bluetooth headset intended for use with
mobile phones. It is not however possible to use
the adaptor with Bluetooth enabled stereo head-
phones as these employ a different Bluetooth
“Profile”.
2
© 2012 Exploraudio, all rights reserved
Under copyright law this manual may not be copied, in whole or in part,
without the written consent of Exploraudio.
Exploraudio, LiveStrings, LiveGuitar, LiveCello, LiveBass, BlueStrings,
BlueAir and H-clamp are Trademarks of Exploraudio.
Bluetooth is a registered Trademark of the Bluetooth SIG.
Other company and product names mentioned herein may be trademarks
of their respective companies. Mention of third party products is for infor-
mation purposes only and represents neither an endorsement nor a recom-
mendation. Exploraudio assumes no responsibility in respect of the per-
formance or use of these products.
Exploraudio is an Explora ltd company.
PO Box 4473
Wedmore
BS28 4WE
www.exploraudio.com
3
Contents
This manual contains basic instructions for setting up and using the BlueAir
Bluetooth audio adaptor and suggestions for where and how it may be
used but the places you can take it and reasons you might use it are lim-
ited only by your imagination.
Section Page
1. Before you start 5
2. Connecting to headsets (pairing) 9
3. Connecting to audio equipment 13
4. Using your BlueAir adaptor 27
i. Basic operation and suggested uses 29
ii. Headset quality 37
iii. Range & interference 37
iv. Avoiding feedback & distortion 37
v. Troubleshooting 37
4
BlueAir Adaptor,
showing the function
button,inducator lights
and charger socket
used in its operation.
Complete wireless freedom and the ultimate in ‘go anywhere’ convenience
make the BlueAir adaptor the perfect pocket companion for impromptu
amplification.
With BlueAir, your own (or someone else’s) Bluetooth headset and almost
any audio system that may be to hand, you have instant live amplification.
Whether purely for fun or for serious performance, the BlueAir adaptor
can’t be beaten for amplification on-the-hoof with everything from violins
to guitars and vocals.
But its uses don’t end with live music and public address. Plug the BlueAir
adaptor into most computers’ standard audio input and output ports and
immediately your Bluetooth headset can be used for internet phone com-
munications using services such as Skype. Not only does it work with non-
Bluetooth enabled equipment but with BlueAir, there is none of the added
latency (audible delay) introduced by Bluetooth headsets connected using
Bluetooth dongles or any built-in Bluetooth connectivity your computer
may have.
5
Before you start
The BlueAir BA-01 Bluetooth audio adaptor pack-
age contians the following:
1 BlueAir Bluetooth audio adaptor
2 Mains power adaptor
3 Selection of connector adaptors
Connector adaptors
(Descriptions on next page)
1
BlueAir Adaptor
Power supply
6
2 x 3.5mm stereo jack to mono RCA socket
3.5mm stereo jack to dual (split stereo)
RCA socket
3.5mm stereo socket to dual (split stereo)
RCA jack
3.5mm stereo socket to dual (split stereo)
RCA jack (lead)
2 x single mono RCA socket to dual mono
RCA socket
2 x single mono RCA jack to dual mono RCA
socket
1/4” mono jack to dual mono 1/4” socket
2 x single mono 1/4” jack to single mono
RCA socket
1/4” stereo jack to dual (split stereo) RCA
socket
7
Preparing for use:
1. Remove all components from the box and using the diagram and con-
tents list on pages 5 and 6, check that they are all correct
2. Powering the BA-01:
Plug the power adaptor into the mains electricity supply (100V - 240V)
and insert its small power connector jack into the socket on the BA-1
(it is the only socket on the unit). A red light will appear on the unit to
confirm that the power supply has been connected correctly.
To switch on the unit, press and hold its button until a green light starts
flashing.
3. Compatibility:
A) Headset. The BlueAir Adaptor will work with all Bluetooth headsets
designed for use with mobile phones but not Bluetooth headphones
designed for use with MP3, MP4 or other stereo audio players.
B) Audio equipment. The audio input and output levels of the BlueAir
Adaptor are broadly compatible with most standard audio inputs and
outputs of both professional and domestic audio systems and computer
equipment. The adapter can be connected to the ‘line’ or microphone
inputs and ‘line’ or headphone outputs of almost all audio equipment
and should work well with everything from PA (public address), instru-
ment and domestic audio equipment to professional mixers / pre-amps,
karaoke systems, portable audio products and computers.
It should not be possible to damage the BlueAir Adaptor by connect-
ing it incorrectly but do not connect it to sensitive, high quality
HiFi or video systems if there is any possibility that they may be
harmed by incompatible electronic equipment.
8
Inhaltsverzeichnis
