BlueParrott B450-XT Bedienungsanleitung

BlueParrott

B450-XT

User Manual

BPB-45020

BlueParrott B450-XT User Manual PAGE 2

TABLE OF CONTENTS

Safety Information............................................................................. 3

Package Contents ............................................................................. 3

Glossary of Terms ............................................................................. 4

Headset Overview ............................................................................. 5

Charging the Headset ......................................................................... 6

• Battery Power Indicators

• Operation While Using the Charger/Adapter

Getting Started ............................................................................... 8

• On/Off/Standby

• Pairing with a Phone

– NFC Pairing

– Regular Pairing

• How to wear and Adjust the B450-XT

– Adjusting the headband length

– Adjusting the headband tension

– Positioning the microphone

– Switching microphone boom between left anf right ear

• Making/Taking Calls

Voice Commands .............................................................................15

Parrott Button ............................................................................... 16

Advanced Features and Functions.............................................................. 17

• Multiple Device Pairing and Multipoint Mode

• Proximity Pairing

• Additional Features and Functions

– Last Number Redial

– Call Waiting/Rejecting a Call

– Rejecting a Call

– Phone Voice Control

– Muting

– Transferring Audio

– Turning Headset Indicator Lights On/Off

– Reset Headset Paired Devices List

– Reset Parrott Button Defaults

• Over-the-air Updates

Functions & Indicators Tables .................................................................. 21

BlueParrott B450-XT User Manual PAGE 3

SAFETY INFORMATION

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your

hearing. To avoid injury, set the volume to the lowest comfortable level. If you experience

ringing in your ears, or voices sound muffled, stop using the headset. Avoid turning up the

volume to block noisy surroundings. It’s possible for your ears to adapt to volume that

is too high, and this could result in permanent hearing damage without any noticeable

discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a

motor vehicle.

• The headset is IP54 rated. Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small

children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 60° C (140° F) (may cause equipment failure).

PACKAGE CONTENTS

A. B450-XT Headset with Leatherette Ear

Cushion

B. Spare Foam Ear Cushion

C. Spare Microphone Windscreen

D. USB-C Charging Cable

E. Auto (DC) Adapter

F. Quick-Start Guide*

G. Warranty and Compliance Document*

*Not pictured.

Images are not shown to scale.

BlueParrott B450-XT User Manual PAGE 4

GLOSSARY OF TERMS

On: Headset is on, but there is no connection to the phone (red light will flash).

MFB: Abbreviation for “Multifunction Button.”

Multipoint Mode: Multipoint Mode allows you to connect and switch between two

Bluetooth devices.

Paired: Two Bluetooth devices agree to communicate with one another.

Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue

light will flash).

Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call

(blue light will flash).

A2DP: Advanced Audio Distribution Profile is a Bluetooth protocol for streaming audio

other than call audio, e.g. music or GPS directions.

BlueParrott B450-XT User Manual PAGE 5

HEADSET OVERVIEW

A. Flexible Microphone Boom

B. Volume Down

C. Volume Up/Mute

D. Indicator Lights

E. Multifunction Button (MFB)

F. Parrott Button

BlueParrott B450-XT User Manual PAGE 6

CHARGING THE HEADSET

Connect the USB-C charging cable

into the headset’s USB-C charging

port. If the headset is not fully

charged, the indicator will turn red.

When the indicator turns blue and

stays blue, the unit is fully charged.

A fully discharged battery will need

approximately 3 hours to achieve a

complete charge.

Battery Power Indicators

While charging, the MFB’s indicator

light shows the level of battery

power on your B450-XT as follows:

Blue light: Fully charged. Over 24

hours’ talk time.

Red light: Less than a full charge.

Charging Fully charged

Headset Charging Port

Auto (DC) Charger

BlueParrott B450-XT User Manual PAGE 7

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

The B450-XT headset will operate from battery power or from power supplied via the

USB-C cable.

NOTE: Do not attach the USB-C cable to a powered USB-C port mid-call. This will cause

the headset to reset, and the call will be sent back to the phone.

When the headset is operating from the battery, all indicator lights and sounds will

function as described in this guide.

When the headset is operating from power supplied via the USB-C cable, the headset—

including the audio indicators—will function as described in this user guide. However,

the MFB lights will indicate the battery charge status.

While the headset is on the charger, press the MFB long enough to power the unit on.

The headset should reconnect automatically unless your phone is set to “always ask” for

connection requests.

After the battery is fully charged, the MFB charge light will turn blue and stay blue

as long as a powered USB-C cable is connected to the headset. While the headset is

fully charged and the charge light is blue, the blue indicator light will also be on if the

headset is powered on.

BlueParrott B450-XT User Manual PAGE 8

GETTING STARTED

On/Off/Standby

Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you

hear a voice prompt,“power on.” The red light will flash once every second.

Turn Headset Off (conserves battery power): Hold down the MFB for

approximately 4–5 seconds until you hear a voice prompt “power off.” A red light

will flash 4 times and the headset will turn off.

Standby Mode: Once the headset is turned on (after the initial pairing), it will

attempt to connect to the last device that it was paired with, putting itself into

Standby Mode.

Pairing with a Phone

When you turn your B450-XT on for the first time,

or if its Paired Device List has been cleared, it will

go into pairing mode automatically. You can pair

the headset using NFC or manually.

NFC (One-Touch) Pairing

1. Make sure that NFC is enabled on your cell

phone.

2. Place the NFC zone of your cell phone against

the NFC zone of the headset and hold them

together until your cell phone registers the

headset.

3. Follow the prompts on your cell phone to

complete pairing.

Note: NFC and One-Touch Pairing are dependent

on your cell phone. The size and sensitivity of your

phone’s NFC zone and the specific way to connect

the headset may vary between devices.

NFC Zone

BlueParrott B450-XT User Manual PAGE 9

Manual Pairing

If the B450-XT has already been paired with another device and you are not going to

use NFC Pairing, you will need to put it into Pairing Mode manually:

Placing Headset into Pairing Mode

By Voice:

Activate headset voice recognition by pressing the Parrott Button or by pressing and

holding the Volume Up button. Then, after the prompt, say “pair mode.” The headset

will enter pairing mode and be visible for pairing to devices for 120 seconds.

Using Buttons:

With the headset powered off, press and hold the MFB until you hear “Power on”. Keep

holding the MFB for approximately 6 seconds until the LED flashes alternating blue

and red, or you hear “Pair mode”. The headset will be visible for pairing to devices for

120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the headset into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s

instructions.

4. Select “BlueParrott B450-XT” to pair. (Passcode is “0000” if needed.)

5. Accept the phone book access request to enable caller ID in the headset.

6. When connected, the headset will give you the voice prompt,“Your headset is

connected.”

GETTING STARTED (continued)

BlueParrott B450-XT User Manual PAGE 10

HOW TO WEAR AND ADJUST THE B450XT

Adjusting the headband length

For a more comfortable and secure fit, the headband length can be adjusted as

illustrated below:

Andere Handbücher für B450-XT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BlueParrott Headset Handbücher

BlueParrott

BlueParrott S450-XT Bedienungsanleitung

BlueParrott

BlueParrott VXI REVEAL PRO Bedienungsanleitung

BlueParrott

BlueParrott Point Bedienungsanleitung

BlueParrott

BlueParrott M300-XT Bedienungsanleitung

BlueParrott

BlueParrott M300-XT Bedienungsanleitung

BlueParrott

BlueParrott B550-XT Bedienungsanleitung

BlueParrott

BlueParrott Xpress Bedienungsanleitung

BlueParrott

BlueParrott S650-XT Bedienungsanleitung

BlueParrott

BlueParrott B450-XT MS Bedienungsanleitung

BlueParrott

BlueParrott C300-XT Bedienungsanleitung

BlueParrott

BlueParrott B650-XT Bedienungsanleitung

BlueParrott

BlueParrott S450-XT Bedienungsanleitung

BlueParrott

BlueParrott B250-XT Bedienungsanleitung

BlueParrott

BlueParrott C400-XT Bedienungsanleitung

BlueParrott

BlueParrott B450-XT Bedienungsanleitung

BlueParrott

BlueParrott M300-XT Bedienungsanleitung

BlueParrott

BlueParrott B250-XT Bedienungsanleitung

BlueParrott

BlueParrott C300-XT Technisches Datenblatt

BlueParrott

BlueParrott C400-XT Technisches Datenblatt

BlueParrott

BlueParrott C300-XT Technisches Datenblatt

BlueParrott

BlueParrott B550-XT Technisches Datenblatt

BlueParrott

BlueParrott C400-XT Bedienungsanleitung

BlueParrott

BlueParrott B250-XTS Bedienungsanleitung

BlueParrott

BlueParrott VXi Reveal Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

Doro

Doro Flexus HS2005 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung