BlueTraks BT-211 Bedienungsanleitung
BT-211
Bluetooth • IPod™• Navigation
User Guide
Please read before using this equipment.
BlueTraks, Inc.
2125 Delaware Avenue, Suite A
Santa Cruz, CA 95060
Phone 1-831-466-0302
www.bluetraks.com
© 2008 Copyright BlueTraks, Inc. All rights reserved.
BT-211 User Guide
BlueTraks Splash Screen
When the BT-211 first powers on, press anywhere on the touch-screen to go
to the MAIN screen.
This start-up screen can be changed to show an image you choose. Just
load any 480x272 pixel image from the USB port to change the image. Your
Dealer/Installer can assist you in doing this.
Splash Screen
Touch Screen Operation
Press the graphic button icons directly on the touch screen display to activate
the function.
Press exactly in the button area to insure a desired result.
Most button graphics will change color when pressed to show contact.
Clean touch screen with dry lint-free cloth when dirty. Do not use liquids to
clean screen.
1
BT-211 User Guide
Main Screen
A. Telephone BATTERY LEVEL display: displays the remaining battery level
of the paired telephone in real-time.
B. Hands-free speaker VOLUME UP button: press to increase volume of
hands-free speaker.
C. PLACE/RECEIVE CALL button: press to place outgoing or to answer
incoming calls.
D. Hands-free speaker VOLUME DOWN button: press to lower volume of
hands-free speaker.
E. MENU button: press to go to MAIN MENU screen
Main Screen
A
B
C
D
E
2
BT-211 User Guide
MENU > MAIN MENU Menu
F. iPOD™ button: press to go to iPod™ control menu screen.
G. NAVIGATION button: press to go to Navigation menu screen
(BT-211N ONLY OR IF EQUIPPED WITH OPTIONAL GPS-211).
H. TOOLS button: press to go to SYSTEM TOOLS menu screen
Main Menu Screen
FG
H
3
BT-211 User Guide
TOOLS > SYSTEM TOOLS Menu
I. PAIRING button: press to connect your Bluetooth telephone to the BT-211.
J. SETTINGS button: press to access BT-211 user settings.
K. SYSTEM INFO button: press to review BT-211 software version, model
number and serial number.
System Tools Screen
I
K
J
4
BT-211 User Guide
SYSTEM TOOLS > PAIRING Menu
Before you can use your BT-211 with your telephone for the first time, you
must initially pair both devices.
Pairing your telephone with the BT-211
1. Press the PAIRING button on the BT-211.
2. The BT-211 is now ready for pairing.
Pairing Screen
3. From your Bluetooth telephone, activate the search for Bluetooth hands-
free devices (consult your telephone’s user guide).
4. Select << BlueTraks>> in the list
5. Enter <<1111>> on your telephone when prompted for PIN
5
BT-211 User Guide
Searching for Hands-Free Devices
6. The BT-211 says <<Bluetooth Pairing Successful!>> when both devices
are paired successfully.
Pairing Successful Screen
6
BT-211 User Guide
Telephone Operation
After you have paired your Bluetooth telephone to the BT-211, you are now
ready to place and receive calls hands-free.
The BT-211 is not a telephone. Your personal Bluetooth enabled telephone
acts as the existing telephone device to place and receive calls. Your
address book and voice dial contacts remain on your phone. The BT-
211 acts as a wireless connection to provide hand-free operation of your
telephone.
Placing Calls
1. Press the PLACE/RECEIVE CALL button to start to place outgoing call.
2. If you have selected voice activated dialing from the SYSTEM TOOLS/
SYSTEM/DIALING MODE check box, you will see the following screen after
your telephone prompts you to speak the contact you are calling.
3. When selecting a contact you must say the contacts name as it is recorded
in your phone book ie. “Call David Smith” if you recorded David’s name as
just David then you must say “Call David” in order to locate the number.
If your telephone supports it, any numeric number can also be voice dialed.
The number does not need to be in your phone book.
Voice Dialing Screen
7
BT-211 User Guide
4. If you have selected keypad dialing from the SYSTEM TOOLS/SYSTEM/
DIALING MODE check box, the following keypad entry screen will be
displayed.
Keypad Entry Screen
5. Enter the telephone number you wish to dial using the touch-screen
keypad and then press SEND to place the call.
6. The call is connected.
Call Established Screen
8
BT-211 User Guide
Receiving Calls
1. When a call is received by the BT-211, press the PLACE/RECEIVE CALL
button to answer the incoming call if desired.
3. For auto answer, you need to set your cell phone to auto answer and the
call will be answered in the amount of rings your phone has been set for.
Incoming Call Screen
Telephone Call Management
Use the following buttons to manage your incoming and outgoing calls.
L. PLACE/RECEIVE CALL: press this button to answer and place calls. Use
this button to switch between a current call and a call waiting call.
M. REJECT: press this button to reject an incoming call while you are
already on a current call. If not, the incoming call will be routed to voice mail.
N. TERMINATE: press this button to end the current call.
O. PRIVACY: press this button to switch from hands-free mode back to
handset mode.
P. MUTE: press this button to temporarily turn off the hands-free microphone.
MNOP
L
9
Andere Handbücher für BT-211
2
Inhaltsverzeichnis
Andere BlueTraks GPS Handbücher
