BLUM M35.7200 Series Bedienungsanleitung

M35.7200

2BA-161

M35.7200

Safety

Table of contents

Reference diagram

Set-up and start-up

Set-up

Clamping and milling

Maintenance

Troubleshooting

Spare parts

Scope of delivery

Conformity

Safety ➢Please read the instruction leaflet and the safety information before starting up

the base notching device.

➢We recommend that you use the reference diagram for easier identification of

the parts being described.

Safety principle

Handling

The base notching device conforms to current safety standards. Nevertheless,

certain risk factors will remain if the information contained in this instruction leaflet is

not observed.

No solid wood or hard wood may be processed.

Residual risk according to

DIN ISO EN 12100

■The base notching device is equipped with all the necessary protection features.

■However, some risk factors will remain for the user, particularly when removing the

protective equipment or when control units fail.

■Other risks are identified by warning signs and safety information. It is therefore

necessary to observe the safety information.

Intended use

Foreseeable misuse

The base notching device is only intended to process drawer bases for the Blum

LEGRABOX. The base notching device may only be used under the following

conditions:

■The base notching device may only be operated by fully trained personnel.

■The base notching device is designed for professional traders.

■Only particle board and medium-density fibreboard (MDF) may be used

as the workpiece.

■The device should only be installed in dry, enclosed rooms.

■Only for drawer bases with a thickness of 16 mm.

Responsibilities The operator

■must ensure that the base notching device is only operated and maintained by

sufficiently trained staff, who have read and understood the instruction leaflet and,

most importantly, the safety section.

■is responsible for ensuring that the base notching device is kept in a safe

operating state.

■will stop using the base notching device immediately when faults occur which

jeopardise safety.

4BA-161

M35.7200

NOTE

■The NOTE sign indicates information that should be observed.

Risk levels WARNING

■WARNING indicates a danger that could cause death or serious injury if not

heeded.

Safety information

➢The base notching device is only intended for use by one person.

➢Before starting work, you should check that the protection devices and

mechanical parts are functioning properly. Any damaged parts should be

replaced by original parts from Blum.

➢Do not make any changes or alterations to the base notching device.

➢Always apply a protective cover when operating the base notching device.

➢For your own safety, use only those accessories which are recommended or

specified in the instruction leaflet or Blum sales catalogue.

➢Check the electrical cable for damage.

➢Failure to observe the instructions and warnings given for this base notching

device may result in serious injury.

➢The instruction leaflet should be accessible at all times.

Warning signs Before connecting the base notching device to the power supply,

you must ensure that you have understood ALL the safety

instructions, warning signs and the instruction leaflet.

WARNING

Serious cuts.

Failure to heed this warning may result in personal injury.

➢The base notching device must be disconnected from the power

supply before cleaning and maintenance.

CAUTION

■CAUTION indicates a danger that could cause injury if not heeded.

Keep non-authorised persons

away from thebase notching device .

No more than one person may use the base notching device at a

time.

Always wear eye protection when operating this machine.

Caution: danger of crushing!

Wear proper ear protection when operating this machine.

6BA-161

M35.7200

Position of warning signs

2013

Ser.No.: MA 00001

Ref.No.: M35.7200

Julius Blum GmbH - A - 6973

Boden-Falzgerät

48,5 lbs

22 kg /

Industriestrasse 1

Reference diagram

Fixing board

Shaft holder

Danger zone

Carriage

Fixing bracket (used to secure the

device during delivery)

Runner

Depth stop

Work top

Clamping lever

Support

Extraction socket

Clamping plate

8BA-161

M35.7200

Reference diagram for carriage

Sliding film

Flange surface

Cutting insert

Notch cutter

Rear protective cover

Front protective cover

Rocker switch

Pre-cutter

1618

Operating elements

Clamping lever

Press down the clamping lever [8] to secure the workpiece.

Rocker switch

The rocker switch [14] is used to switch the base notching device off and on.

NOTE

■The rocker switch [14] does not have an inching mode.

■Caution: non-stop operation.

10 BA-161

M35.7200

Dimensions

Required table space

Set-up and start-up

WARNING

The base notching device weighs 22 kg.

Failure to observe this information may result in personal injury.

➢The base notching device must be lifted by two persons.

Height (H): _________________________________________________________ 264 mm

Width (W): __________________________________________________________ 584 mm

Depth (D): __________________________________________________________ 110 8 mm

Weight: _______________________________________________________________ 22 kg

➢Should only be used in dry, enclosed rooms.

22 kg

1000 mm

300 mm

Inhaltsverzeichnis

Andere BLUM Inneneinrichtung Handbücher

BLUM

BLUM 70T3553 Bedienungsanleitung

BLUM

BLUM TANDEM plus BLUMOTION 563F Bedienungsanleitung

BLUM

BLUM Movento 769R5337MB Bedienungsanleitung

BLUM

BLUM TANDEMBOX plus Bedienungsanleitung

BLUM

BLUM TANDEMBOX Installationsanleitung

BLUM

BLUM Tandem Bedienungsanleitung

BLUM

BLUM TANDEMBOX 356M55B7SAB Bedienungsanleitung

BLUM

BLUM AVENTOS HKi Bedienungsanleitung

BLUM

BLUM TANDEMBOX Bedienungsanleitung

BLUM

BLUM TANDEM plus BLUMOTION 563H Bedienungsanleitung

BLUM

BLUM BLUMOTION AVENTOS HS Bedienungsanleitung

BLUM

BLUM AVENTOS HK Bedienungsanleitung

BLUM

BLUM Aventos HK-S Bedienungsanleitung

BLUM

BLUM SERVO-DRIVE flex Bedienungsanleitung

BLUM

BLUM SPACE TOWER SLIM Bedienungsanleitung

BLUM

BLUM TANDEM plus BLUMOTION 569H Bedienungsanleitung

BLUM

BLUM COMPACT BLUMOTION 38C Series Bedienungsanleitung

BLUM

BLUM METABOX 320N Leitfaden

BLUM

BLUM AVENTOS HK Technisches Handbuch

BLUM

BLUM TANDEM plus BLUMOTION 563F Bedienungsanleitung

BLUM

BLUM TANDEM 568R5337BB Bedienungsanleitung

BLUM

BLUM CLIP top 110 Bedienungsanleitung

BLUM

BLUM AVENTOS HL Bedienungsanleitung

BLUM

BLUM Wellborn WDVC3030 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung