5
2. INSTALLATION
1Define the case position, ensuring proximity of the induction loop amplifier
(not included).
2Loosen the four screws of the case.
3Attach the case in position with the screws, firmly securing it against the wall.
4 Make the electrical connections: two RCA jacks + Ethernet network.
3. USE - WEB SERVER
There are two methods of accessing the web interface:
1) Open a page in your internet browser then, in the search bar, enter the IP address of the product present on your
network (for example, 192.0.1.128).
2) Use the Sigma software, in the menu Configuration > IP devices > Harmonys tab click on the button Web server
access to open the web server (refer to software manual, 607726).
The SIGMA software can be used to:
- detect the devices present on the network,
- configure each device (independently of each other, or copy the settings of one device to a group of devices),
- update the device’s software version,
3.1 Home
The home page contains the following general information:
- Product: product type.
- Name: product name + MAC address (in correspondence with the MAC address noted on the product identification
label during installation). By default: “Bodet-MAC address” (modifiable in the Network configuration
menu). The default value can be used to locate the product on the network on commissioning.
Ø8
3
EN
2
