Body Craft V2 Bedienungsanleitung

QUESTION?

As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or

find missing or damaged parts, we will guarantee your complete satisfaction through our authorized

dealer service centers or our home office customer service department. Please call your local dealer for

assistance or RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate

assistance to you, free of charge.

We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is

guranteed for as long as you own it. We will repair or replace anything that goes wrong.

Bodycraft is a division of Recreation Supply Inc.

P. O. Box 181

Sunbury, OH 43074

INSTRUCTION MANUAL

OPTION OF K1 (V2)

LEG PRESS (V2)

4109LP

STEP 3

LEG PRESS CABLE (243)

Eyelet end Metal ball end

-6-

Pull out the selector pin at weight stack of K1 gym to allow top cable movable.

1. Attach the eyelet end of the Leg Press Cable (243) to the Leg Extension Arm (17),

using one 3/8" X 3" Hex Bolt (113) and one 3/8" Nylon Nut (138) as shown in Fig.1.

2. Run the cable through the slot in the front of the Seat Frame (7) and mount a

pulley in the slot using one 3/8" X 2-3/4" Hex Bolt (114), two 3/8" steel Bushing

(83), two 3/8" Washers (130) and one 3/8" Nylon Nut (138) as shown in Fig 2.

3. Slide the cable through the Base Frame (1) from front to rear slot, you will now

mount a pulley (65) in the rear slot, using 3/8" X 2-1/2" Hex Bolt (116) and one 3/8"

Nylon Nut (138). Then route the cable under a pulley mounted on the plate welded

on the rear Base Frame (1), attach Pulley Guard (28) and Metal Tab (27) at both

side of the pulley, using one 3/8" X 2" Hex Bolt (117) and one 3/8" Nylon Nut (138).

4. Route the cable up and around pulley mounted in the second hole in the bottom of

the Double Pulley Block (24), using one 3/8" X 1-3/4" Hex Bolt (118) and one 3/8"

Nylon Nut (138). When cabling is complete, this pulley can be moved upward to

take a slack or downward to gain length.

5. Continue to route the cable down to the pulley on the Base Frame (1), mount a

pulley using one 3/8" X 1-3/4" Hex Bolt (118) and one 3/8" Nylon Nut (138) as

shown in Fig.6.

6. Continue to route the cable underneath the weight stack and around the

horizontally mounted pulley on the Leg Press Main Frame (202), mount the pulley

using one 3/8" X 1-3/4" Hex Bolt (233) and one 3/8" Nylon Nut (241) as shown in

Fig. 7.

7. Continue to route the cable through the slot in the Leg Press Main Frame (202),

and under and around (exiting on the top) the lowest pulley on the Rear Leg Press

Support (208) as shown in Fig. 8,10. Mount the pulley using one 3/8" X 1-3/4" Hex

Bolt (233) and one 3/8" Nylon Nut (241).

8. Then route the cable under and around (exiting on the top) the right side (as if

sitting on seat) pulley mounted in the leg Press Main Frame (202) as shown in

Fig.9,11. Mount two pulleys here using one 3/8" X 2-3/4" Hex Bolt (232) and one

3/8" Nylon Nut (241).

9. Route the cable in the same manner under and around the uppermost pulley

mounted on the Rear Leg Press Support (208) as shown in Step 1. Mount the

pulley using one 3/8" X 1-3/4" Hex Bolt (233) and one 3/8" Nylon Nut (241).

10. Route the cable in the same manner under and around the left side (as if sitting

on seat) pulley mounted in the Leg Press Main Frame (202) as shown in Step 2.

11. Hold the ball end of the cable with Metal Washer (246) in front of the inner tube of

the receptor holder (244). Tighten the receptor Holder (244) on the Rear Leg

Press Support (208) as shown in Fig.12, using one 3/8" X 2-1/4" Hex Bolt (249),

two 3/8" Washers (238) and one 3/8" Nylon Nut (241).

STEP 3

FIG 3

FIG 5

FIG 4

FIG 8

FIG 7

FIG12

FIG 9

FIG 1

FIG11

FIG 6

FIG10

LEG PRESS CABLE (243)

Eyelet end Metal ball end

-7-

FIG 2

114

130

138

FIG 1

113 17

138

FIG 3

130

116

FIG 4

138

117

119

FIG 6

138

118

FIG 7 233

221

241

202

118

FIG 5

138

221

233

241

208

FIG 8,10

FIG 10

FIG 8

FIG 9,11

221

241

232

FIG 12

FIG 9

STEP 2

STEP 1

FIG 12

248

247

245 246

244

238

241

238

249

Inhaltsverzeichnis

Andere Body Craft Heim-Fitnessstudio Handbücher

Body Craft

Body Craft 5042 Bedienungsanleitung

Body Craft

Body Craft OWNER'S MANUAL Bedienungsanleitung

Body Craft

Body Craft 50442 Bedienungsanleitung

Body Craft

Body Craft Dip Station F415 Bedienungsanleitung

Body Craft

Body Craft Galena Bedienungsanleitung

Body Craft

Body Craft F602V2 Bedienungsanleitung

Body Craft

Body Craft Xpress Pro Bedienungsanleitung

Body Craft

Body Craft STRATA Bedienungsanleitung

Body Craft

Body Craft BCG 446 Bedienungsanleitung

Body Craft

Body Craft Strength Training System Bedienungsanleitung

Body Craft

Body Craft HFT Bedienungsanleitung

Body Craft

Body Craft PFT Bedienungsanleitung

Body Craft

Body Craft VR500 Pro Bedienungsanleitung

Body Craft

Body Craft F601 Bedienungsanleitung

Body Craft

Body Craft Multi Gym GX Bedienungsanleitung

Body Craft

Body Craft PFT Bedienungsanleitung

Body Craft

Body Craft BCG-GX Bedienungsanleitung

Body Craft

Body Craft GX GYM LEG PRESS Bedienungsanleitung

Body Craft

Body Craft MA410 Bedienungsanleitung

Body Craft

Body Craft F603 Betriebsanleitung

Body Craft

Body Craft MA605 Bedienungsanleitung

Body Craft

Body Craft X2 Bedienungsanleitung

Body Craft

Body Craft M300 Bedienungsanleitung

Body Craft

Body Craft VR200 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

cardiobull

cardiobull RA17 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung