Bogen QUANTUM VOIP series Bedienungsanleitung

Configuration and Operations Manual

VoIP

54-2232-01A 1512

Specifications subject to change without notice.

This page left intentionally blank

Getting Started Page 8-3

How to Un-Configure a VoIP Speaker

Page 8-11

Adding VoIP Speakers to Quantum List

Via Quantum Commander Pages 8-9

How to Reboot a VoIP Speaker

Page 8-12

Software Updates

Page 8-13

Notes

Page 8-19

Table of Contents

1.1 Configure IP Address Information . . . . . . . . . . . . . . . . . . . . . . . . .Page 8-3

1.1.1 Configure VoIP Speakers using DHCP . . . . . . . . . . . . . . . . . . . . . .Page 8-3

1.1.2 Configure VoIP Speakers using Static IP Addresses . . . . . . . . . . . . .Page 8-4

1.2 Configure Primary Quantum IP Address . . . . . . . . . . . . . . . . . . . . .Page 8-5

5.1 Software Update using Quantum Commander . . . . . . . . . . . . . . .Page 8-13

A. Update via Web Browser

B. Update via Software Download

5.2 Software Update using VoIP Speaker Configuration Tool . . . . . . . .Page 8-17

7.1 Install and Run Java Applications . . . . . . . . . . . . . . . . . . . . . . . .Page 8-20

7.2 Login Window Operational Notes . . . . . . . . . . . . . . . . . . . . . . . .Page 8-21

Appendix

Page 8-20

8-1

Table of Contents

6.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8-19

6.2 DHCP Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8-19

6.2.1 Configuring IP Address for the VoIP Speakers using DHCP . . . . . . .Page 8-19

6.2.2 Default IP Address Assignment . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8-19

6.2.3 Using a Previously Assigned IP Address . . . . . . . . . . . . . . . . . . . .Page 8-19

VoIP Speaker Configuration

and Operations Manual

This page left intentionally blank

8-2

Getting Started

8-3

Getting Started

1The Bogen VoIP Speakers are powered via Power over Ethernet (PoE).

Use an 802.3af compliant Power over Ethernet Switch, or a PoE

injector adapter (IEEE 802.3af compliant) for each VoIP Speaker.

The VoIP Speakers need to be configured with an IP Address, netmask,

and Primary Quantum IP Address.

The VoIP Speakers (Models WBS810QIP and S810QIP) will only

operate on a Bogen Quantum Multicom IP system (Quantum System)

running Quantum Node (QSPC1) and Quantum Commander software

version 1.3.0 or newer.

Configuring a VoIP Speaker is a 3-step process:

1. Configure IP Address information (DHCP or static. DHCP stands

for Dynamic Host Configuration Protocol.)

2. Configure Primary Quantum IP Address

3. Configure Station Type and Architecture Number

1.1 Configure IP Address Information

If using a DHCP server to provide IP Addresses to the VoIP Speakers, proceed to

Section 1.1.1,

Configure VoIP Speakers using DHCP

If using and configuring Static IP Addresses on the VoIP Speakers, proceed to

Section 1.1.2,

Configure VoIP Speakers Using Static IP Addresses

1.1.1 Configure VoIP Speakers Using DHCP

1. Setup a DHCP server to provide IP Addresses to the VoIP Speakers in the network. Consult

the facility’s Information Technology (IT) department if required, as IT departments are usually

responsible for operating DHCP servers. For convenience during VoIP Speaker configuration,

install a DHCP server on a Windows PC that will be used to configure VoIP Speakers.

This document will use IP Addresses in the range 10.10.10.2 through 10.10.10.5, with the

Windows PC IP Address set to 10.10.10.10.

IMPORTANT: The DHCP server must be configured to always provide the same IP Address to

the VoIP Speaker. This is usually accomplished by mapping the device’s MAC Address to a

permanent IP Address. If the DHCP server is not configured to provide the same IP Address,

and if the VoIP Speaker is assigned a different address than the address it had while being

configured with Quantum Commander, the VoIP Speaker will not be available to the Quantum

system (until it receives the same address from the DHCP, or is reconfigured).

2. The VoIP Speaker is powered via Power over Ethernet (PoE). Connect the Windows PC and

VoIP Speaker to a PoE switch.

3. After the VoIP Speaker has been plugged into the PoE switch, it will take about a minute for

the VoIP Speaker to boot, start, and obtain its IP Address from the DHCP server. Proceed to

Section 1.2, Configure Primary Quantum IP Address

, to continue the configuration process.

8-4

Getting Started

1.1.2 Configure VoIP Speakers Using Static IP Addresses

1. Connect the Windows PC and VoIP Speaker to an 802.3af compliant PoE switch, or a

PoE injector adapter (IEEE 802.3af compliant), for each VoIP Speaker.

2. Configure the Windows PC IP Address as 10.16.2.2, with Gateway IP Address as 10.16.2.1.

3. Use a web browser to open the VoIP Speaker Configuration Login Page

(Figure 1-1)

. Enter

the following into the browser’s address bar: http://10.16.2.1:8080.

4. Enter the Login Page sign-in credentials:

Username: maint Password: bogen

After entering the Username and Password, click

Submit. The VoIP Speaker Configuration window

(Java-applet) will open

(Figure 1-2)

5. Change the DHCP option from “On” to “Off” to

configure static IP Addresses.

NOTE: If after selecting “Off”, a popup screen

appears that says: “Cannot edit Speaker IP when

Primary IP is present. Please un-configure Primary IP from

Utility.” This alerts you to the fact that the speaker is

already configured and must first be un-configured

before you can proceed. See Section 3, How to

Un-configure a VoIP Speaker, for details on how to

un-configure the speaker.

If the VoIP Speaker Configuration Login Page above does not display, wait one minute, try again.

(Fig.1-1)

(Fig.1-2)

✍

After the VoIP Speaker has been plugged into the PoE switch, it will take about a minute for the

VoIP Speaker to boot. Each VoIP Speaker will then repeatedly attempt to get an IP Address from

a DHCP server for one minute. After trying for one minute, the speaker will configure itself with a

default IP Address (10.16.2.1) and default Gateway IP Address (10.16.2.2).

NOTE: Only one speaker can be configured at a time using this IP address assignment process.

Connecting two or more un-configured IP speakers to the network without a DHCP server will cause

duplicate IP addresses and conflicts.

✍

8-5

Getting Started

NOTE: If the DHCP “On” option is selected, you will not be able to edit the fields to configure

static address information.

6. Enter values for Speaker IP, Subnet Mask, and Default Gateway, then click Save.The speaker

will automatically reboot and reconfigure the network interface.

NOTE: The VoIP Speaker will accept configuration commands for up to 15 minutes, after which

time it will reboot. It is important that you finish this step within 15 minutes. See Section 6.2.2,

Default IP Address Assignment, for further information on the 15 minute configuration time window.

✍

1.2 Configure Primary Quantum IP Address

After the VoIP Speakers’ IP Address have been configured (using static or DHCP), the next step

is to configure the VoIP Speaker with the Primary Quantum IP Address (the Quantum Node that

is currently set as Primary Node type in the network). All VoIP Speakers should use the same

Primary Quantum IP Address, even if the VoIP Speaker will be added to the Station List of

a different Quantum Node that is not the Primary Node in the network. One or more VoIP

Speakers can be configured at the same time.

1. You need to load the application called VoIP Speaker Locator onto the PC. Copy the file

named

VoIPSpeakerLocator.jar

to the Windows PC that will configure the VoIP Speaker(s).

2. Start the VoIP Speaker Locator application by double-clicking the VoIPSpeakerLocator.jar

icon on the desktop. After displaying a splash screen, the application will display the Device

Discovery Configuration Screen

(Figure 1-3)

3. Enter the Windows PC’s IP Address into the Utility IP Address field. This should be the IP

Address for the PC interface that is used to connect to the same network that the VoIP Speakers

are connected to (e.g., 10.10.10.10).

(Fig.1-3)

4. Enter a valid Utility Port Number between 4000 and 15000. This Port Number will be opened

on your PC for receiving discovery responses from VoIP Speakers. This document will use

Port 7000.

NOTE: If the VoIP Speaker Locator application is unable to discover any VoIP Speakers, ensure that

the specified Port Number is not being blocked by firewalls on your PC or network hardware.

5. Select Discover All from the Discover Option drop-down menu.

NOTE: If the “Discover Not Configured” option is selected, you will only be able to discover

VoIP Speakers that have not yet been configured. This is useful when there are some VoIP Speakers

in the network that have not yet been configured. This way, the application will only discover

the VoIP speakers that have not yet been configured. If not selected, the application will discover

all the speakers in the network (whether configured or not), requiring you to manually find and

mark the un-configured speakers from the list of discovered speakers (Figure 1-4).

6. Click the Discover button. The Discover button will be highlighted while the application is

discovering VoIP Speakers. If this is the first time you have pressed Discover since starting

the application, a dialog window will open when discovery is completed. The dialog box

will remind you that the Port Number cannot be changed while running the application.

If you need to change the Port Number, restart the application.

NOTE: If you receive the error “Invalid IP Address”, try entering a new/different IP Address.

NOTE: If you receive the error “Port values cannot be edited further,” you cannot change the

port number as it has already been configured.

NOTE: If you need to change the IP Address, utility port or discover option, you must restart the

application.

7. When the Discover button is no longer highlighted, click the Program Devices tab on the left

panel

(Figure 1-4)

to proceed to the Assign Primary Quantum IP Address to Devices screen.

A list of VoIP Speakers that have not yet been configured with a Primary Quantum IP Address

will be displayed.

✍

8-6

Getting Started

(Fig.1-4)

8-7

Getting Started

8. Select the VoIP Speaker(s) that you wish to configure (e.g., 10.10.10.3) by clicking on the

checkbox to the left of each speaker listed. A checkmark will appear next to each speaker

selected

(Figure 1-5)

9. Enter the Primary Quantum IP Address in the Primary Quantum IP field (e.g., 10.10.10.1).

10. Click Configure Speakers. The selected speaker(s) will be configured.

11. Click the Refresh icon located to the top right of the screen a couple of times until you see

the Quantum IP Address change for all recently configured speakers. (For example, in

Figure 1-6, the speaker’s Quantum IP Address has changed from 0.0.0.0 to 10.10.10.1).

(Fig.1-5)

(Fig.1-6)

REFRESH

BUTTON

8-8

Getting Started

(Fig.1-7)

12. Click the View Device Status tab on the left panel

(Figure 1-7).

The VoIP Speaker List screen

will appear. All the VoIP Speakers available in the network will be listed. If a VoIP Speaker

is already configured on a Quantum Node, the Architecture Number assigned to it will

be shown.

Inhaltsverzeichnis

Andere Bogen Sprecher Handbücher

Bogen

Bogen ENHANCER ESYS1 Bedienungsanleitung

Bogen

Bogen CSD2X2VR Bedienungsanleitung

Bogen

Bogen Easy Design WB1EZ Bedienungsanleitung

Bogen

Bogen IH8A Bedienungsanleitung

Bogen

Bogen Bogen WBS8T725 WBS8T725 WBS8T725 Bedienungsanleitung

Bogen

Bogen NEAR OPS1 Leitfaden

Bogen

Bogen SP58A Bedienungsanleitung

Bogen

Bogen Speaker Line Attenuator UTI1 AUX Bedienungsanleitung

Bogen

Bogen HFCS1LP Leitfaden

Bogen

Bogen 700286198 Leitfaden

Bogen

Bogen SM4T Bedienungsanleitung

Bogen

Bogen Bogen NEAR ORBIT OPS1 Leitfaden

Bogen

Bogen A2 Bedienungsanleitung

Bogen

Bogen NEAR Orbit OCS1 Leitfaden

Bogen

Bogen Nyquist NQ-S1810CT-G2 Bedienungsanleitung

Bogen

Bogen CSD2X2U-V2 Betriebsanleitung

Bogen

Bogen SPT-5A Bedienungsanleitung

Bogen

Bogen MB8TSL Bedienungsanleitung

Bogen

Bogen Quantum S810QIPPG8U Bedienungsanleitung

Bogen

Bogen FMH15T Bedienungsanleitung

Bogen

Bogen Easy Design CS1EZ Bedienungsanleitung

Bogen

Bogen HFCS1 Leitfaden

Bogen

Bogen R6/R6T Bedienungsanleitung

Bogen

Bogen BDT30A Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung