Bonnet Neve SHAPE Bedienungsanleitung

N° DOC. UM000311

REV. A - 29.08.18

USER

INSTRUCTIONS

SHAPE

HOT TABLE

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 2/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

Humidied Heated Display Case/

Mod. SHAPE

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 3/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

INDEX

INTRODUCTION

RESPONSABILITIES

ALIDITY AND COPYRIGHT

INTENDED USE

HANDLING AND WAREHOUSING

ENVIRONMELTAL REQUIREMENTS FOR INSTALLATION

INSTALLATION

START UP

USE

TEMPERATURE ADJUSTMENT

CLEANING

MAINTENANCE

DECOMMISSIONING AND DISPOSAL

CAP. N° N° PAG.

pag.3

pag.10

pag.11

pag.12

pag.14

pag.15

pag.19

pag.21

pag.30

pag.9

pag.13

pag.20

pag.26

pag.37

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 4/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

OVERALL DIMENSIONS AND INSTALLATION DIAGRAM

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 5/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

1. INTRODUCTION

1.1 PRELIMINARY STATEMENTS

THE INSTRUCTION MANUAL IS TO BE CONSIDERED AS AN INTEGRAL PART OF THE PRODUCT

AND MUST ACCOMPANY THIS UNTIL THE EQUIPMENT IS DECOMMISSIONED AND DISPOSED OF.

THIS MANUAL MUST BE PRESERVED BY A PURPOSEDLY DESIGNATED PERSON IN A SUITABLE

PLACE KNOWN BY ALL THE PARTIES CONCERNED, IN ORDER FOR IT TO BE READILY

AVAILABLE FOR REFERENCE.

1.2 CONTENTS OF THE MANUAL

This manual contains the description of the product termed SHAPE/SHAPE manufactured by

EPTA S.p.A.

The manual contains information on the installation, use and maintenance of the product.

It also contains details on the technical features and on safe use of the product.

1.3 PURPOSE OF THE MANUAL AND PARTIES INVOLVED

The information contained in the instruction manual is aimed to explain the use and technical

features of the product; it also provides advice for product handling, assembly, adjustment and

use.

Moreover it contains information concerning the directions to be given to the personnel in char-

ge of operation, as concerns maintenance jobs and safe performance of these.

This instruction manual caters for:

OPERATORS: qualied individuals in charge of operating, adjusting, cleaning the equipment

and performing ordinary

maintenance.

SPECIALIZED TECHNICIANS: individuals possessing the technical training and the expertise

required to make them aware of the hazards one encounters when performing maintenance

jobs, therefore able to use the measures necessary to minimize personal damage and to per-

form extraordinary maintenance jobs, repair, replacements, overhauling.

The title of every single section of this manual bears the

indication of the individuals the section itself is addressed

to (OPERATORS or SPECIALIZED TECHNICIANS).

If no indication is given in the title it means that the section

caters for both.

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 6/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

1.4STRUCTURE OF THE MANUAL AND KEY TO THE SYMBOLS USED

IMPORTANT ; This symbol is used to indicate advice, rules, reminders and

notices that all those involved in the use of the product (each for his/her scope

of activity), must consider at all stages of the life of the equipment (installation,

use, maintenance, decommissioning, etc.).

CAUTION; This symbol is used in the manual’s safety messages to highlight the

hazards that could cause small or moderate injuries if overseen.

The message may also be used only to highlight conditions that could cause da-

mage to the equipment.

HAZARD; This symbol is used in the manual’s safety measures to indicate the

behaviour to be absolutely avoided during equipment use and maintenance and

whenever potentially hazardous situations arise, which could entail severe

injuries and even death.

IN ORDER TO AVOID ACCIDENTS, read, understand and abide by all the precautions and

advice contained in this manual an/or on the labels appearing on the equipment.

2. RESPONSABILITIES

THE INSTRUCTION MANUAL IS TO BE CONSIDERED AS AN INTEGRAL PART OF THE

PRODUCT AND MUST ACCOMPANY THIS UNTIL THE END OF ITS LIFE.

The manufacturer disclaims whatever responsibility resulting from:

▪ improper, incorrect or unreasonable use of the product.

▪ use that is contrary to the National regulations.

▪ incorrect product installation.

▪ incorrect power supply.

▪ poor scheduled maintenance.

▪ unauthorized changes or jobs.

▪ use of spares that are not original or not specic for the relevant model.

▪ failure to observe the instructions contained in this manual.

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 7/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

3. VALIDITY AND COPYRIGHT

3.1 OVERVIEW

This use and maintenance manual, including all the relevant attachments, is the only documen-

tation supplied for the equipment and must accompany this as long as it is in service.

Should this manual be lost or damaged, a replacement can be asked directly to EPTA S.p.A.

3.2 VALIDITY OF THE MANUAL

This manual reflects the state of technology applied to the construction of the equipment at the

time when this is marketed; thus it cannot be considered as inappropriate or obsolete if it is

subsequently updated further to new experiences.

3.3 MANUAL COPYRIGHT

EPTA S.p.A. reserves the right to update production and as a consequence also the applicable

use and maintenance manual, without incurring the obligation to inform the client of the

changes made.

3.4 COPYRIGHT

This manual is exclusive property of EPTA S.p.A. Handing over this manual to third parties must

be authorized by EPTA S.p.A.’s management.

It is strictly prohibited to copy or reproduce, even partially, any drawings or documents contai-

ned in this manual.

Any violation will be prosecuted according to the law, and entitles to damage compensation

following commercial law provisions.

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 8/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

4. INTENDED USE (OPERATOR)

The product is aimed to be used by qualified personnel, i.e. personnel that

has been instructed and trained to use the product and the relevant hazards

by the employer.

Therefore, read the manual with the utmost care before use and instruct the

operator on the use of the equipment following the directions in this manual.

The instructions in this manual also apply to those in charge of handling,

installing, maintaining and disposing of the equipment, each for his/her own scope of activities.

The product must only be used for the purpose it was designed for, as stated in the manual.

The cabinet is only suitable for holding the temperature of cooked warm

food for short periods of time and exclusively when the food is being

served.

No other use, like coking or long-term temperature holding, is allowed.

The display cabinet may not be used by children or people with such impaired physical, sen-

sory or mental capacities as may not allow safe use of the equipment without supervision or

instruction.

During normal use of the equipment the front glazing must be closed; only during maintenance

or clearing is it possible to open the glazing completely. Intermediate positions are prohibited.

It is prohibited to remove guards or panels when removing them calls for the use of tools.

Tampering or altering the product is absolutely prohibited.

Any other use not explicitly expressed in this manual is considered

as hazardous; EPTA may not

be held responsible for any damage resulting from improper or

unreasonable use.

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 9/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

5. HANDLING ANDWARE HOUSINGE (SPECIALIZED TECHNICIAN)

5.1 TRANSPORTATION

The equipment may only be loaded and unloaded by qualied personnel, who will

see to verifying the weights involved and the exact lifting points; they’ll also see

that the lifting equipment used is safe and has the necessary carrying capacity.

Only the people in charge of operations must be in the area in which the hosting

takes place.

Fig. 1

To hoist the equipment insert the truck

forks in the slot between the feet of

the pallet.

Even the weight

out in order for the barycentre of the

package to be balanced (Fig.1).

Do not overturn the equipment.

PROHIBITED LIFTING MEANS

Lifting means or equipment not meeting the safety features must not be used, do not use e.g.:

• lifting capacity smaller than the weight of the equipment;

• noncompliant construction folklift truck features

• construction features altered through use;

• substandard ropes or cables;

• worn-out ropes or cables.

Handling procedures other than those described in this chapter are not

allowed.

TECHNICAL DOCUMENTATION STATE REVISION OF THE CHAPTER IN CONFORMITY

WHITH THE

APPROVED

ORIGINAL

PRODUCT VELVET TC ORD. DATE ORD. DATE

N° DOC. UM000331 A D PAGE 10/34

N° CHAP. B E FIRST ISSUE 29.08.18

C F ISSUE MKTG

5.2 WAREHOUSING

The equipment must be stored in a dry humidity-free environment.

Before storing the equipment, provide for a cloth that may protect it from dust and dirt.

Fig. 2

When storing the appliance (crate packaging),

do not stack more than two packages on top of

each other (Fig. 2).

MAX 2 PCS

6. ENVIRONMENTAL REQUIREMENTS FOR INSTALLATION

The equipment must be installed in a closed environment, covered

and safe from atmospheric agents.

The equipment must not be installed in rooms containing explosive

substances.

25°C

60%

Position the equipment far from draught (doors,

windows and air conditioning outlets etc.) and

observe a distance of at least 100 mm from the

wall or from any object that may hamper correct

air circulation around the equipment.

Climate conditions in the room must be within the

temperature limits established for the equipment

class (25 °C - 60% R. H.); when these conditions

are not complied with, poorer equipment

performance must be accepted (FIG. 3).

Fig. 3

Andere Handbücher für SHAPE

Inhaltsverzeichnis

Andere Bonnet Neve Vitrine Handbücher

Bonnet Neve

Bonnet Neve OFFLIP 2 Bedienungsanleitung

Bonnet Neve

Bonnet Neve SHAPE Bedienungsanleitung

Bonnet Neve

Bonnet Neve BRISK 83 Bedienungsanleitung

Bonnet Neve

Bonnet Neve SKYLIGHT Bedienungsanleitung

Bonnet Neve

Bonnet Neve H20 Bedienungsanleitung

Bonnet Neve

Bonnet Neve FLASH Bedienungsanleitung

Bonnet Neve

Bonnet Neve AGORA 3 Bedienungsanleitung

Bonnet Neve

Bonnet Neve OFFLIP HOT Bedienungsanleitung

Beliebte Vitrine Handbücher anderer Marken

Hatco

Hatco FLAV-R-SAVOR FSCD Series Bedienungsanleitung

True

True TCGD-50 Bedienungsanleitung

Tecnodom

Tecnodom EVO SELF Betriebsanleitung

Delfield

Delfield F15SC48N Bedienungsanleitung

saro

saro FIONA Bedienungsanleitung

Hendi

Hendi 233962 Bedienungsanleitung

Hoshizaki

Hoshizaki HNC-120BE-L-BLH Bedienungsanleitung

Nordcap

Nordcap GENIUS 2 H145-L70 Bedienungsanleitung

Omcan

Omcan RS-CN-0140-D Bedienungsanleitung

Tecnodom

Tecnodom M Series Betriebsanleitung

freor

freor MERCURY Bedienungsanleitung

Costan

Costan WHALE 2000 G LG300 Bedienungsanleitung

Costan

Costan IMPALA Bedienungsanleitung

True Manufacturing Company

True Manufacturing Company TCGD-50 Bedienungsanleitung

Bartscher

Bartscher 100L Bedienungsanleitung

Steelcase

Steelcase Opus Bedienungsanleitung

Hatco

Hatco Glo-Ray GRHD-2P Anwendungshandbuch

Costan

Costan BELLAVISTA H2000 Bedienungsanleitung