Bosch DICENTIS Montageanleitung

DICENTIS

Conference System

en Hardware Installation Manual

DICENTIS Table of contents | en 3

Bosch Security Systems B.V. Hardware Installation Manual 2021.01 | V2.2 |

Table of contents

1Safety 4

2About this manual 6

2.1 Intended audience 6

2.2 Alerts and notice signs 6

2.3 Copyright and disclaimer 6

2.4 Document history 6

3System installation overview 9

3.1 Typical system setup 10

3.2 System extension 13

4System installation design and planning 17

4.1 System capabilities 17

4.2 Hardware requirements 19

4.3 Power supply capacity calculation plan 22

4.3.1 Calculation using DCNM-APS2 or DCNM-PS2 22

4.3.2 Calculation using PoE switches 25

4.4 Redundancy options 28

4.4.1 Redundant cabling for DCNM-APS2/DCNM-PS2 units 29

4.4.2 Redundant server PC 31

5Installation material and tools 32

5.1 DCNM-CBCPLR Cable couplers 32

5.1.1 Using a cable coupler to extend a cable 33

5.1.2 Using a cable coupler as a break-out box 33

5.1.3 Using a cable coupler as an interface between different types of cable 34

5.1.4 Using a cable coupler to insert power locally 35

5.1.5 Using a cable coupler to switch the system on 36

5.2 DICENTIS System Cable Assemblies 38

5.3 DCNM-CBCON Connectors for DICENTIS cable 40

5.4 DCNM-CBTK System Network Cable Toolkit 41

5.5 DCNM-CB250-I System Installation Cable 42

5.6 DCNM-IDESKINT On-air & teleph. DCNM-IDESK 43

6Mechanical installation of Central Equipment 47

6.1 Audio processor and powering switch and Powering switch 47

6.2 System server 51

6.3 Dante gateway 52

7Mechanical installation of Contribution Devices 56

7.1 DICENTIS tabletop devices 56

7.2 DICENTIS flush-mounted devices 61

7.2.1 DCNM-FSL Flush language selector 66

7.3 DCNM-IDESK / DCNM-IDESKVID Interpreter desk 69

7.4 DICENTIS Microphones 72

7.5 DCNM-MMDSP Anti-reflection foil 74

7.6 DCNM-NCH Name Card Holder 75

8Installation Test 76

4en | Safety DICENTIS

2021.01 | V2.2 | Hardware Installation Manual Bosch Security Systems B.V.

1 Safety

Prior to installing or operating products, always read the Important Safety Instructions which

are available as a separate multilingual document: Important Safety Instructions (Safety_ML).

These instructions are supplied together with all equipment that can be connected to the

mains supply.

Safety precautions

Some of the DICENTIS Conference System products are designed to be connected to the

public mains network.

To avoid any risk of electric shock, all interventions must be carried out with disconnected

mains supply.

Interventions with the equipment switched on are authorized only when it is impossible to

switch the equipment off. The operation must only be performed by qualified personnel.

Old electrical and electronic equipment

This product and/or battery must be disposed of separately from household waste. Dispose

such equipment according to local laws and regulations, to allow their reuse and/or recycling.

This will help in conserving resources, and in protecting human health and the environment.

Class A equipment (commercial broadcasting equipment)

This equipment is for professional (Class A) electromagnetic compatibility equipment. Seller

or user should pay attention to this point. It is intended for use outside the home.

Warning!

Changes or modifications made to this equipment, not expressly approved by Bosch Security

Systems B.V. may void the user’s authority to operate the equipment.

FCC Statement - Wired Class A digital device (unintentional radiator)

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Note: The FCC Wired Class A statement applies to:

– DCNM-D

DICENTIS Safety | en 5

Bosch Security Systems B.V. Hardware Installation Manual 2021.01 | V2.2 |

FCC Statement - Wired Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Note: The FCC Wired Class B statement applies to:

– DCNM-MMD2

FCC and IC Wireless Statement

This device complies with Part 15 of the FCC Rules and with Industry Canada license exempt

RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Note: The FCC and IC Wireless statement applies to:

– DCNM-MMD2

– DCNM-D

– DCNM-DVT

– DCNM-DSL

– DCNM-DE

– DCNM-IDESK

– DCNM-IDESKVID

6en | About this manual DICENTIS

2021.01 | V2.2 | Hardware Installation Manual Bosch Security Systems B.V.

2 About this manual

The purpose of this manual is to provide information required for installing the DICENTIS

Conference System.

This installation manual is available as a digital document in the Adobe portable document

format (PDF).

For more information, refer to the product related information on www.boschsecurity.com

2.1 Intended audience

This hardware installation manual is intended for installers of a DICENTIS Conference System.

2.2 Alerts and notice signs

Four types of signs can be used in this manual. The type is closely related to the effect that

may be caused if it is not observed. These signs - from least severe effect to most severe

effect - are:

Notice!

Containing additional information. Usually, not observing a ‘notice’ does not result in damage

to the equipment or personal injuries.

Caution!

The equipment or the property can be damaged, or persons can be lightly injured if the alert

is not observed.

Warning!

The equipment or the property can be seriously damaged, or persons can be severely injured

if the alert is not observed.

Danger!

Not observing the alert can lead to severe injuries or death.

2.3 Copyright and disclaimer

any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of the publisher. For information on getting permission for reprints and

excerpts, contact Bosch Security Systems B.V.

The content and illustrations are subject to change without prior notice.

2.4 Document history

Release date Documentation version Reason

2013.08 V1.0 1st edition.

2014.07 V1.1 2nd edition.

New sections: 1 WEEE, 3.2

system ext, 5.2.1, 5.2.2.

DICENTIS About this manual | en 7

Bosch Security Systems B.V. Hardware Installation Manual 2021.01 | V2.2 |

Release date Documentation version Reason

Sections updated: 2.4, 4.3.2,

5.2, 5.3, 5.4, 7.2 +

DCNM‑MICx added.

2014.10 V1.2 3rd edition.

Sections updated: 2.4, 3.2,

4.1 and 4.3.1.

2015.07 V1.3 4th edition.

New section: 4.4, including

sub-sections: 4.4.1, 4.4.2, and

4.4.3.

Sections updated: 2.4, 3.1,

3.2, 4.1, 4.3, 4.3.1, 5.3, 5.4,

6.1, 7.4, 8.

2015.11 V1.31 5th edition.

Sections updated: 2.4, 7.1.

Terminology updated.

2016.07 V1.4 6th edition.

Terminology updated.

DCN multimedia changed to

DICENTIS .

Sections updated: 3.1, 3.2,

4.1, 4.3.1, 4.3.2, 4.4.1, 4.4.2,

4.4.3, 5.3, 5.4, 7.1, 7.2, 7.3,

7.4, 8.

2017.10 V1.5 7th edition.

Terminology and product

names updated.

New section: 5.5

Sections updated: 5.2.1,

5.2.2, 7.1 new radio

interference warning added.

2017.12 V1.6 8th edition.

Sections updated: 5.5.3,

5.5.4.

2018.04 V1.7 9th edition.

Sections updated: 3.1, 3.2,

4.3.1, 4.3.2, 4.4, 5.2, 5.4,

5.5.4.

New section: 7.2 DCNM-

IDESK and DCNM-IDESKVID

Interpreter desk added.

8en | About this manual DICENTIS

2021.01 | V2.2 | Hardware Installation Manual Bosch Security Systems B.V.

Release date Documentation version Reason

2019.03 V1.8 10th edition.

Sections updated: 1, 7.2.

New section: 5.6 DCNM-

IDESKINT On-air & teleph.

DCNM-IDESK

2019.08 V1.9 11th edition.

Sections updated: 3.2 System

extension, 6.2 System server,

and 6.3 Dante gateway.

New section: 5.5.5 Using a

cable coupler to switch the

system on.

2019.12 V2.0 12th edition.

Sections updated: 3.2 System

extension, 4.3.1 Calculation

using DCNM-APS(2) or

DCNM-PS(2), 6.3 Dante

gateway.

New sections: 7.2 DICENTIS

Flush mounted devices, 7.2.1

DCNM-FSL Flush language

selector.

2020.05 V2.1 13th edition.

Sections updated: 3 System

installation overview, 7.1

DICENTIS tabletop devices,

7.2 DICENTIS flush-mounted

devices.

2021.01 V2.2 14th edition.

Section added: DCNM-

IDESKINT On-air & teleph.

DCNM-IDESK.

DICENTIS System installation overview | en 9

Bosch Security Systems B.V. Hardware Installation Manual 2021.01 | V2.2 |

3 System installation overview

It is advisable to participate in the DICENTIS Conference System training before you install,

configure, prepare, and operate a DICENTIS Conference System.

The DICENTIS Conference System is an IP based conference system which runs on an OMNEO

compatible Ethernet network. It is used for distributing and processing audio, video and data

signals.

The DICENTIS Conference System can be quickly and easily configured as a daisy‑chain

configuration or as a star configuration:

–Daisy‑chain configuration: Uses dedicated cabling, consisting of CAT‑5e cables including

two additional power conductors (see

Typical system setup, page 10

–Star configuration: Each DICENTIS device is connected with an individual standard

CAT‑5e cable. An Ethernet switch is also required for providing Power over Ethernet

(PoE).

Notice!

When Power over Ethernet is used, DICENTIS devices cannot be daisy‑chained.

Refer to

– Typical system setup, page 10

10 en | System installation overview DICENTIS

2021.01 | V2.2 | Hardware Installation Manual Bosch Security Systems B.V.

3.1 Typical system setup

Figure3.1: Typical DICENTIS Conference System setup

A typical DICENTIS Conference System consists of:

1. System server (DCNM-SERVER):

– The heart of the system. It licenses functionality, configures and controls the system.

2. Client PC:

– Can be used to: Manage meetings, prepare meetings and configure the system.

3. Optional video camera (Onvif Profile-S compatible cameras, Sony IP cameras via CGI

commands, or Panasonic HD Integrated IP) + external power supply:

– Captures the image of a speaking participant.

4. Ethernet switch:

– Ethernet switch with PoE on some ports.

- Routes the system data via Ethernet.

- Provides power to the DICENTIS devices via PoE.

5. CAT‑5e Ethernet cable (minimum requirement).

6. Powering switch (DCNM-PS2):

– Is used to increase the number of DICENTIS devices connected to the system.

7. Audio processor and powering switch (DCNM-APS2):

– Controls the system audio, routes audio from and to the system and supplies power

to the DICENTIS devices.

Andere Handbücher für DICENTIS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Konferenzsystem Handbücher

Bosch

Bosch CCS 1000 D Bedienungsanleitung

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch INTEGRUS Bedienungsanleitung

Bosch

Bosch DICENTIS Montageanleitung

Bosch

Bosch DICENTIS Merkblatt

Bosch

Bosch CCS 900 Ultro Bedienungsanleitung

Bosch

Bosch CCS 1000 D Anleitung zur Verwendung

Bosch

Bosch DCN multimedia Bedienungsanleitung

Bosch

Bosch DCN multimedia Bedienungsanleitung

Bosch

Bosch DCN-DS Bedienungsanleitung

Bosch

Bosch B426 Handbuch

Bosch

Bosch CCSE-DL CCS700 Bedienungsanleitung

Bosch

Bosch DICENTIS Merkblatt

Bosch

Bosch DCN-WD Referenzhandbuch

Bosch

Bosch INTEGRUS Bedienungsanleitung

Bosch

Bosch DICENTIS Montageanleitung

Bosch

Bosch F.01U.299.030 Bedienungsanleitung

Bosch

Bosch DCN multimedia Montageanleitung

Bosch

Bosch DCN multimedia 1.41 Anleitung zur Verwendung

Bosch

Bosch DCN-DIS Referenzhandbuch

Bosch

Bosch DICENTIS Bedienungsanleitung

Bosch

Bosch DCN-CON Concentus Delegate Unit Referenzhandbuch

Bosch

Bosch DICENTIS Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung