Bosch FW 200 Bedienungsanleitung

Operating Instructions for the User

Boiler Energy Management System

FW 200

6 720 612 481-00.1R

6 720 643 262 (2010/05)

2| US/CA

Dear Customer,

The controls are the “brain” of your heating

system. We have set it at the factory so that the

settings will be appropriate for most cases. This

way, daily operation is easy. The large, clear

display of the controls “speaks plain text” and

shows all relevant information.

Program space and water heating

With the controls you can set how warm you want

it at what times. We have already set various

scenarios from which you can choose.

An example: do you work and therefore are you

not at home during the day? Then perhaps you

only need full heating comfort in the mornings

and the evenings. During the day you save energy

in “economy mode” and at night, the heat is

reduced further still. Perhaps you have entirely

different needs because you are at home all day?

Whatever your lifestyle and your habits may be --

the heating system will adapt itself to your needs.

Even for unforeseen cases: 100% comfort

Did you get home earlier than planned and would

you like to have the house warm right away even

though your boiler is in “economy mode”? In this

case the controls switch to “heating mode” right

away with the press of a key. In just a short time,

you will be as comfortable as usual. Another

example: you would like to shower even though

your boiler is currently running in “economy

mode”? Here too, the press of a key can help you.

The water is heated and in just a short time you

can enjoy your hot shower. Depending on the

type of hot water heating, the system returns to

“economy mode” automatically after half an hour

or after an hour.

Consideration of the outdoor temperature

This is an outdoor reset control. It increases or

decreases the output of your heating system

depending on the outdoor temperature.

The controls can be installed on the boiler or

mounted directly on the wall in the living area. If

it is in the room, it can also be used to record the

room temperature for optimizing comfort.

Solar optimization

With our patented process

“SolarInside ControlUnit”, you save up to 15%

additional energy during hot water heating if you

have a solar thermal system installed. You can

find information about the solar yield on the

controls’ Info menu.

These operating instructions

These operating instructions contain the most

important information on daily operation of the

controls.

There is a listing of other interesting functions of

the controls in section 6.

If you would like to learn more, there is a detailed

description of all available functions in the

detailed installation and operating instructions.

Specialized terms are explained for you at the

end of these operating instructions.

We hope you will enjoy your new Bosch product.

Your Bosch team

6 720 643 262 (2010/05)

Contents | 3US/CA

Contents

1 Explanation of symbols and safety

information . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Notes structure . . . . . . . . . . . . . . . . . 4

1.2 Safety instructions . . . . . . . . . . . . . . 4

2 Details about the controls . . . . . . . . . . . . 5

2.1 Certifications . . . . . . . . . . . . . . . . . . 5

2.2 Disposal . . . . . . . . . . . . . . . . . . . . . . 5

2.3 Cleaning the housing . . . . . . . . . . . . 5

3 Display reading . . . . . . . . . . . . . . . . . . . . . 6

4 Operation with closed flap . . . . . . . . . . . . 8

4.1 Controls . . . . . . . . . . . . . . . . . . . . . . 8

4.2 If it is too cold or too warm for you 10

4.3 If you would like to change the

heating program temporarily . . . . . 11

4.4 If you would like to change the

DHW program temporarily . . . . . . . 11

5 Operation with open flap . . . . . . . . . . . . 12

5.1 Controls . . . . . . . . . . . . . . . . . . . . . 12

5.2 Changing room temperatures

permanently for the heating

program . . . . . . . . . . . . . . . . . . . . . 14

5.3 Constant room temperature . . . . . . 16

5.4 Selecting and adapting a heating

program . . . . . . . . . . . . . . . . . . . . . 17

5.4.1 Activating a heating program . . . . . 18

5.4.2 Adapting a heating program

individually . . . . . . . . . . . . . . . . . . 18

5.4.3 Resetting heating program to

factory settings . . . . . . . . . . . . . . . 20

5.5 Selecting and adapting DHW

program . . . . . . . . . . . . . . . . . . . . . 21

5.5.1 Connecting DHW program to the

active heating program . . . . . . . . . 22

5.5.2 Activating a DHW program . . . . . . . 23

5.5.3 Adapting the DHW program

individually . . . . . . . . . . . . . . . . . . 23

5.5.4 Resetting DHW program to

factory settings . . . . . . . . . . . . . . . 24

5.6 Setting up a vacation program . . . . 25

5.6.1 Setting the beginning of vacation . 25

5.6.2 Setting the end of vacation . . . . . 26

5.6.3 Starting vacation mode . . . . . . . . 26

5.6.4 Canceling the vacation

program early . . . . . . . . . . . . . . . . 26

5.7 Changing the time and date . . . . . 27

5.7.1 Changing the time . . . . . . . . . . . . 27

5.7.2 Changing the date . . . . . . . . . . . . 27

6 Information about additional functions 28

7 Environmental protection . . . . . . . . . . . 29

8 Troubleshooting . . . . . . . . . . . . . . . . . . . 30

8.1 Eliminating “sensed” faults . . . . . 30

8.2 Eliminating displayed faults . . . . . 32

9 Energy saving tips . . . . . . . . . . . . . . . . . 33

10 Menu structure . . . . . . . . . . . . . . . . . . . 34

Technical terms . . . . . . . . . . . . . . . . . . . 38

6 720 643 262 (2010/05)

4| Explanation of symbols and safety information US/CA

1 Explanation of symbols and safety information

1.1 Notes structure

Warnings

Signal words at the beginning of a warning are

used to indicate the type and seriousness of the

ensuing risk if measures for minimizing damage

are not taken.

•NOTE indicates that minor damage to

property may occur.

•CAUTION indicates possible minor to medium

personal injury.

•WARNING indicates possible severe personal

injury.

•DANGER indicates that severe personal injury

may occur.

Important information

Additional symbols

1.2 Safety instructions

BTo ensure proper function, follow these

instructions.

BDanger of scalding due to thermal

disinfection:

If the thermal disinfection function is enabled,

a thermostatic mixing valve must be installed.

BWhen there is a risk of frost, leave the boiler

switched on and follow the frost protection

information.

Risk of damage due to operator error

Operator errors can cause injury and damage to

property.

BEnsure that children never operate this

appliance unsupervised or play with it.

BEnsure that only individuals who can operate

the controls correctly have access to them.

Warnings are indicated in the text

by a warning triangle and a gray

background.

In case of danger due to electric

current, the exclamation point on

the warning triangle is replaced

with a lightning symbol.

Important information that

presents no risk to people or

property is indicated with this

symbol. It is separated by

horizontal lines above and below

the text.

Symbol Meaning

BSequence of steps

ÆCross-reference to other points in

this document or to other

documents

•Listing/list entry

–Listing/list entry (2nd level)

Tab. 1

6 720 643 262 (2010/05)

Details about the controls | 5US/CA

2 Details about the controls

2.1 Certifications

2.2 Disposal

BDispose of packaging in an environmentally

responsible manner.

2.3 Cleaning the housing

BIf necessary, clean the controls housing with a

damp cloth; do not use any aggressive or

acidic cleaning agents for this.

This product has been tested

and is certified for both the US

and Canadian markets, and

meets all applicable US and

Canadian standards.

6 720 643 262 (2010/05)

6| Display reading US/CA

3 Display reading

Fig. 1 Symbols on the display (sample figures)

6 720 643 262-30.1O

912 h15

2124h

912 h15

2124h

246

1314 10

6 720 643 262 (2010/05)

Display reading | 7US/CA

Item Symbol Designation Explanation

1Temperature

display

•The current room temperature is displayed if the

controls are mounted on the wall and set accordingly.

•The current supply temperature is displayed if the

controls are installed on the boiler or mounted on the

wall and set accordingly.

2Time and day

of the week

Current time and day of the week.

3Flashing

segment

Current time (1 segment = 15 minutes, here 1:45pm

(13:45) to 2:00pm (14:00)) or switch time in the heating

program.

4Full

segments

Period of the operating mode Comfort (high room

temperature) or hot water heating (high hot water

temperature), 1 segment = 15 minutes.

5Empty

segments

Period of the operating mode Economy (medium room

temperature) or hot water heating (medium hot water

temperature), 1 segment = 15 minutes.

6No segment Period of the operating mode Frost (low room

temperature) or hot water heating (reduced hot water

temperature).

7Header Name of the superior menu level, of the program, etc.

83 text lines Menu options, info texts, set values, etc.

9Back Jump back to the higher menu level.

10 Additional

texts

If the text displayed has more than 3 lines, this is

indicated by the directional arrow. The additional text

can be viewed by turning the dial.

11 Burner

operation

The boiler is heating.

12 Operating

mode

Current operating mode Comfort / Economy / Frost.

13 Automatic

mode

Automatic change of the operating modes to the set

switch points according to the heating program.

14 Vacation The vacation program is active.

Tab. 2 Symbols on the display

12 h

6 720 643 262 (2010/05)

8| Operation with closed flap US/CA

4 Operation with closed flap

4.1 Controls

Fig. 2 Operating elements with closed flap

912 h15

2124h

6 720 643 262-01.1O

6 720 643 262 (2010/05)

Operation with closed flap | 9US/CA

Item Element Designation Explanation

1Dial •Turning dial:

change the room temperature temporarily.

•Pressing dial:

switches heating zone or confirms setting/value.

2“Come/go” button Start the next operating mode Comfort / Economy /

Frost of the heating program immediately. The

heating program is thus changed temporarily.

3“DHW single charge”

button

Start the hot water heating immediately. The DHW

program is thus changed temporarily.

Tab. 3 Operating elements with closed flap

6 720 643 262 (2010/05)

10 | Operation with closed flap US/CA

4.2 If it is too cold or too warm for

you

You can read the current temperature from the

display. Depending on the mounting location (on

the wall or in the boiler) and the setting, the

display shows either the room temperature or the

supply temperature.

Changing the heating circuit

You can choose between two heating circuits.

Ask the installer of your heating system how the

heating circuits are assigned, heating circuit 1 is

the heating with radiators and heating circuit 2 is

the radiant floor heating.

BPress dial to change too the second

heating circuit.

Fig. 3 Sample display for heating circuit 2 (if

the controls are mounted on the wall)

BPress dial again to change to the first heating

circuit.

Displaying the temperature setting

BIf desired, press dial to change the

heating circuit.

BTurn dial one click.

Changing the temperature setting temporarily

With a closed flap, you can temporarily change

the room temperature with the dial .

If the controls display the room temperature:

BIf desired, press dial to change the heating

circuit.

BRotate dial until the desired day room

temperature is displayed.

The temperature display flashes.

BPress the dial.

The change applies until the next switch point

of your heating program has been reached.

After this, the settings of the heating program

apply again.

If the controls display the supply temperature:

BIf desired, press dial to change the heating

circuit.

BTurn the dial to set the heating WARMER or

COOLER.

The position arrows on the display bars flash.

BPress the dial.

The change applies until the next switch point

of your heating program has been reached.

After this, the settings of the heating program

apply again.

The desired room temperature is an

orientation value that the outdoor

reset control tries to achieve.

Deviations from the actually-

achieved room temperature can

occur.

912

2124

6 720 643 262-23.1O

You can also change the room

temperature permanently

(Æsection 5.2).

Andere Handbücher für FW 200

Inhaltsverzeichnis

Andere Bosch Controller Handbücher

Bosch

Bosch Worcester Digital Twin Channel Programmer Handbuch

Bosch

Bosch D2212B Kurzanleitung

Bosch

Bosch Rexroth Rho 4.0 Bedienungsanleitung

Bosch

Bosch rexroth CS610 Bedienungsanleitung

Bosch

Bosch Rexroth ctrl CORE Bedienungsanleitung

Bosch

Bosch BAT 250 Bedienungsanleitung

Bosch

Bosch Buderus Logamatic 5000 Series Bedienungsanleitung

Bosch

Bosch Rexroth ctrlX SAFETY SAFEX-C.12 Bedienungsanleitung

Bosch

Bosch Rexroth CS 106 Benutzerhandbuch

Bosch

Bosch rexroth HMS01 Bedienungsanleitung

Bosch

Bosch FMR-7033 Bedienungsanleitung

Bosch

Bosch Rexroth 31 Series Gebrauchsanweisung

Bosch

Bosch CR 10H Bedienungsanleitung

Bosch

Bosch Rexroth EcoDrive 03 Bedienungsanleitung

Bosch

Bosch Smart Home Controller AA Bedienungsanleitung

Bosch

Bosch BAT 251 Bedienungsanleitung

Bosch

Bosch CL200 Bedienungsanleitung

Bosch

Bosch ME 200 Bedienungsanleitung

Bosch

Bosch 560 DDC Bedienungsanleitung

Bosch

Bosch REXROTH IndraMotion MLD Bedienungsanleitung

Bosch

Bosch AMC-4W Bedienungsanleitung

Bosch

Bosch G100 Bedienungsanleitung

Bosch

Bosch Rexroth IndraDrive C HCS03.1 Technisches Handbuch

Bosch

Bosch CC 100 M Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch