Bosch NEB 36" Bedienungsanleitung

BoschInstallationManual:

NEB

Table of Contents

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Tools and Parts Needed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Parts Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Overall Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Countertop Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Before Calling Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Product Data Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Questions?

1-800-944-2904

www.boschappliances.com

5551 McFadden Ave.

Huntington Beach, CA 92649

We look forward to hearing from you!

English 1

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE AFTER INSTALLATION IS COMPLETE.

IMPORTANT: SAVE FOR THE LOCAL INSPECTOR'S USE.

Important Safety

Instructions

WARNING: Improper installation, adjustment, alteration, service or mainte-

nance can cause injury or property damage. Refer to this manual. For assistance

or additional information consult a qualified installer, service agency, or manufac-

turer.

• Have the installer show you the location of the circuit breaker or fuse. Mark it

for easy reference.

• Be sure your appliance is properly installed and grounded by a qualified tech-

nician.

Equipment and Usage Safety Requirements

• Before you plug in an electrical cord, be sure all controls are in the OFF posi-

tion.

• To eliminate the risk of burns or fire by reaching over heated surface units,

cabinet storage space located above the surface units should be avoided. If

cabinet storage is to be provided, the risk can be reduced by installing a range

hood that projects horizontally a minimum of 5 inches (12.7 cm) beyond the

bottom of the cabinet.

• This appliance has been tested in accordance with ANSI/UL 858 Standard for

Safety for Household Electric Ranges and CAN/CSA-22.2 No.61 National

Standard of Canada for Household Cooking Ranges. It is the responsibility of

the owner and installer to determine if additional requirements and standards

apply in specific installations.

Safety

English 2

Before You Begin

Tools and Parts

Needed

1. Phillips Head Screwdriver

2. Jigsaw

3. Scissors

4. Tape Measure

5. Aluminum Tape (for solid surface countertop installations only)

Parts Included 1. Foam tape

2. Hold down brackets (4)

3. Clamping Screws, #10-32 x 2 1/2” (63.8 mm) (4)

4. Sheet Metal Screws, #8 x 3/8” (9.5 mm) (4)

5. Washers (4)

If parts are missing or damaged, call the number or write to the address listed

inside the front cover.

Overall Dimensions The cooktop’s overall dimensions are:

• Width 36" (91.4 cm)

• Depth 21-1/8" (536.9 mm)

• Height above countertop: 1/4" (6.35 mm)

• Overall height: 3-5/8” (92.58 mm)

Cabinet Requirements CAUTION: To eliminate the risk of burns or fire by reaching over

heated surface units, cabinet storage space located above the surface

units should be avoided. If cabinet storage is to be provided, the risk can be

reduced by installing a range hood that projects horizontally a minimum of 5 in.

(127 mm) beyond the bottom of the cabinets.

This unit is designed for installation in the countertop with zero clearance to adja-

cent walls and projecting surfaces constructed of combustible materials. A 30-

inch (762 mm) minimum clearance is required between the top of the cooktop and

the bottom of an unprotected cabinet. A 24-inch (610 mm) minimum distance is

necessary when the bottom of the wood or metal cabinet is protected by not less

than 1/4 inch (6.35 mm) of a flame retardant material covered with not less than

Installation

Figure 1: Cabinet Requirements

Cabinet Bottom

(Unprotected)

Building Back

Wall

Building Side

Wall

Cooking

Surface

30” min.

(762 mm)

English 3

No. 28 MSG sheet steel, 0.015-inch (0.4 mm) thick stainless steel, 0.024-inch (0.6

mm) aluminum, or 0.020-inch (0.5 mm) thick copper. Flame retardant materials

bear the mark:

UNDERWRITERS LABORATORIES INC.

CLASSIFIED

MINERAL AND FIBER BOARDS

SURFACE BURNING CHARACTERISTICS

Followed by the flame spread and smoke ratings, these designations are shown

as “FHC (Flame Spread) / (Smoke Developed)”. Materials with “O” flame spread

ratings are flame retardant. Local codes may allow other flame spread ratings.

The minimum horizontal clearance from the sides and back edge of the cooktop to

the adjacent vertical combustible walls is 0 (zero) inches.

Countertop

Requirements

Countertop cutout dimensions are shown in the figure and table below. A range of

cutout dimensions is shown because the actual dimensions depend upon whether

the installation is for replacement, new construction, or installation in a solid sur-

face countertop material, such as Surel™ or Corian®.

Solid surface countertops require larger cutouts, use of heat reflective tape and

rounded corners. Always consult the countertop manufacturer for specific installa-

tion instructions. For solid surface countertop installations, use the maximum cut-

out dimensions below and consult the surface manufacturer for specific cutting

instructions.

Installing Over an Oven This unit is not approved for installation over an oven.

Power Requirements Power Supply is dual rated: 240 Volts or 208 Volts, 4 wire, 60 Hz, with the follow-

ing circuit breaker requirements:

Figure 2: Countertop Requirements

Table 1: Standard Countertop Cutout Dimensions

Cutout

Area

Minimum Dimension

inches / (mm)

Maximum Dimension

inches / (mm)

A 2 1/2” (63.5 mm) setback

distance

2 1/2” (63.5 mm) setback

distance

B 19 7/8” / (505 mm) 20” / (508 mm)

C 34 3/4” / (883 mm) 34 7/8” / (886 mm)

1" (25.4 mm) Flat Area

1" (25.4 mm)

Flat Area

30" (76.2 cm)

Minumum

2-1/2"

(63,8 mm)

Setback Distance

(

from front edge of counter-

top to front edge of cutout.)

1-3/4" (44.5 mm) Flat Area

English 4

• 40 Amp circuit breaker

• 240 Volt, 4 Wire, 60 Hz / 208 Volt, 4 Wire, 60 Hz

Connect only to a 4-wire 120/240 or 120/208 volt AC system. The neutral is

required for the operation of this appliance and an independent ground is

required.

Installation Procedure

WARNING: To avoid electrical shock hazard, before installing the

cooktop, switch power off at the service panel and lock the panel to

prevent the power from being switched on accidentally.

1) Prepare Power Supply • Install a junction box (not supplied), below the counter top within 3 feet (91.4

cm) of flexible conduit (supplied) located at the left rear corner of the cooktop

rough-in box.

• Plan the installation of the unit so the location of the junction box is within 3

feet (91.4 cm) of the left rear of the cooktop bottom.

• The junction box must be accessible from the front of the cabinet.

2) Seal the Cooktop with

Foam Tape Foam tape is provided to seal the cooktop edges to the countertop. Seal the cook-

top with the foam tape as follows:

Important: Apply the tape starting at a middle point of any edge of the cooktop.

Do not start at any corner of the cooktop.

1. Turn cooktop upside down.

2. Start at the middle of the front, back, or either end of the cooktop and apply

the one continuous piece of tape approximately 1/16” (1.6 mm) from the glass

edges. Use tape around the entire glass perimeter.

3. Overlap the end of the tape with the start of the tape and cut through the cen-

ter of the overlapping pieces with the scissors to ensure the ends of the tape

create a tight-fitting butt joint.

Figure 3: Junction Box Installation

“j” Box

Conduit

(approx 3 ft.(91.4 cm))

12”

(30.4 cm)

(approx)

English 5

4. Remove excess tape where tape ends butt.

3) Prepare the Countertop The cutout dimensions depend upon whether the installation is for replacement,

new construction, or installation in a solid surface countertop material, such as

Surel™, Corian® etc. Countertops made from natural (i.e. granite and marble) or

SOLID SURFACE MATERIALS, such as Surell™ and Corian® require larger cut-

outs, use of heat reflective tape and rounded corners. Always consult the counter-

top manufacturer for specific instructions.

For Standard Countertops

1. Cut out the countertop according to the dimensions shown in Table 1.

For Solid Surface Countertops

1. Use the maximum cutout dimensions in Table 1 and consult the countertop

surface manufacturer for specific cutting instructions.

2. Round the cutout corners per instructions from countertop manufacturer.

3. Apply heat reflective tape (such as Scotch® Aluminum Foil Tape #425 or

#427) around the cutout so that it folds over the top and side surfaces. Be

sure the tape extends beyond the outermost flange of the cooktop. All corners

should also be covered with tape.

4) Secure Cooktop to Countertop The cooktop should be secured to countertop using hold-down brackets provided.

1. Turn cooktop upside down and attach the brackets to the burner box using the

washers and screws. Use the unthreaded screw holes for attaching the

bracket to the cooktop. The threaded screw holes are needed for the clamp-

ing screws that attach the bracket to the countertop in a later step.

2. Rotate the mounting brackets sideways to allow enough clearance for the

cooktop to be inserted through the cutout opening.

3. Place cooktop into cutout. Center cooktop in the cutout to ensure adequate

clearance between the burner box and countertop edge. (A light pencil mark

along the center of front edge and side edge of cooktop and counter will aid in

the positioning of the cooktop in the center.)

Figure 4: Seal the Cooktop

Foam

Tape

Seal

Swivel Conduit Connector

Start tape in middle

of a side, not on a corner

Figure 5: Applying Heat Reflective Tape for Solid Surface Installation

shows location of

aluminum reflective

tape

tape top and vertical

sides of cutout

English 6

4. Place a wood block on the underside of the cabinet where the adjusting screw

will meet the countertop. The adjusting screws will tighten down on the wood

block to clamp the cooktop tightly to the countertop. This will protect the coun-

tertop surface from damage.

5. Rotate brackets into proper position and insert clamping screws into the

brackets.

6. Tighten clamping screws into wood blocks to secure cooktop to countertop.

5) Trim Excess Aluminum Tape

(solid surface countertop

installation only)

Trim excess aluminum tape from along the frame edges. BE CAREFUL not to

scratch the countertop.

6) Electrical Connection 1. Attach flexible conduit to the junction box.

2. Connect the cooktop lead wires to the junction box supply wires in proper

phase: for all models, connect black (L1) to black, red (L2) to red, white wire

to neutral, green wire to ground.

Note: The ground wire and neutral wire are twisted together at the factory. For

proper operation, untwist and connect to the required four wire system.

NOTE: If the cooktop is installed and connected as specified above, it will be com-

pletely grounded in compliance with the National Electrical Code.

7) Final Check 1. Remove everything from the cooktop surface and apply glass ceramic cook-

top cleaner (packaged with cooktop) as directed in Use and Care Manual.

2. Turn on power supply.

3. Test operation.

CAUTION:Your cooktop surface needs to be cleaned daily. Refer

to the Use and Care Manual before using it for the first time.

Figure 6: Secure the Cooktop

washer

threaded

screw hole

burner box

bracket

bracketclamping screw

screw

wood block

countertop

English 7

Before Calling

Service

If the elements do not heat or if the indicator “on” light does not glow, check the

power source to see if a fuse has blown or if the circuit breaker has tripped.

Refer to the Warranty in the Use and Care Manual. See Use and Care Manual for

troubleshooting information.

Product Data

Plate

The data plate shows the model and serial number of your cooktop. It is located in

the center front area of the rough-in box, underneath the cooktop.

Keep your invoice or escrow papers for warranty validation if service is needed.

Service

Figure 7: Data Plate Location

Data Plate

Table des matières

Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Instructions de sécurité importantes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Outils et pièces nécessaires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Pièces comprises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Dimensions hors tout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Exigences de l’armoire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Exigences du plan de travail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation au-dessus d’un four . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Exigences électriques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Marche à suivre d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Avant d’effectuer un appel de service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Plaque signalétique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Questions?

1.800.944.2904

www.boschappliances.com

5551 McFadden Ave.

Huntington Beach, CA 92649

Nous serons heureux d’avoir de vos nouvelles !

Inhaltsverzeichnis

Sprachen:

Andere Bosch Kochfeld Handbücher

Bosch

Bosch NGM5056UC Bedienungsanleitung

Bosch

Bosch NET8069UC Bedienungsanleitung

Bosch

Bosch NIT5668UC Bedienungsanleitung

Bosch

Bosch AutoChef NET 8654 UC Bedienungsanleitung

Bosch

Bosch NET5654UC - 500 36" Electric Cookt Bedienungsanleitung

Bosch

Bosch NIT8053UC - 30in 4 Burner Induction Cooktop Bedienungsanleitung

Bosch

Bosch FAP-OC 500Series Bedienungsanleitung

Bosch

Bosch NET8054UC - 800 30" Electric Cookt Kurzanleitung

Bosch

Bosch NIT5665UC - Strips 500 36" Induction Cooktop Bedienungsanleitung

Bosch

Bosch NET8054UC - 800 30" Electric Cookt Bedienungsanleitung

Bosch

Bosch NIT3065UC Bedienungsanleitung

Bosch

Bosch NITP069UC Bedienungsanleitung

Bosch

Bosch NIT8669SUC Bedienungsanleitung

Bosch

Bosch Integra HDI7282U Bedienungsanleitung

Bosch

Bosch NIT5066UC Bedienungsanleitung

Bosch

Bosch NGM5 55UC Series Bedienungsanleitung

Bosch

Bosch NIT8065UC - Strips 800 30" Induction Cooktop Bedienungsanleitung

Bosch

Bosch NET5466SC Bedienungsanleitung

Bosch

Bosch NET8068SUC Bedienungsanleitung

Bosch

Bosch NGM Series Bedienungsanleitung

Bosch

Bosch NGM5656UC Bedienungsanleitung

Bosch

Bosch NGM30 Bedienungsanleitung

Bosch

Bosch PCQ715A90V Bedienungsanleitung

Bosch

Bosch NIT8068UC Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Bonnet

Bonnet OPTIMUM 700 Betriebsanleitung

Jenn-Air

Jenn-Air JGCP430 Bedienungsanleitung

Frigidaire

Frigidaire FES367FCC Kurzanleitung

Ztove

Ztove EZ2 DUO Bedienungsanleitung

Kleenmaid

Kleenmaid cooking GCTK9011 Installationsanleitung

Jenn-Air

Jenn-Air JGC2536EB00 Bedienungsanleitung

Waldorf

Waldorf RN8603E-B Bedienungsanleitung

Whirlpool

Whirlpool SMP658CNEIXL Bedienungsanleitung

Wolf

Wolf CI243C/B Bedienungsanleitung

Fulgor Milano

Fulgor Milano F5PGK305S1 Bedienungsanleitung

GE JP389 Bedienungsanleitung

Wells

Wells WV-2HFG Bedienungsanleitung

IKEA

IKEA Lagan HGA4K Bedienungsanleitung

Samsung

Samsung NA36N9755 Bedienungsanleitung

Miele

Miele KM 404 Bedienungsanleitung

Lacor

Lacor 69562 Technisches Datenblatt

Keating Of Chicago

Keating Of Chicago MG-2 Bedienungsanleitung

Jenn-Air

Jenn-Air CCE1400 Bedienungsanleitung