Bosch PC600 Bedienungsanleitung

Automationstechnik

Antriebs- und Steuerungstechnik

Digital input and output modules

Module description

PC600 / CL300 / CL400 / CL500

101

Version

PC600 / CL300 / CL400 / CL500

Digital input and output modules

Module description

1070 072 144-101 (95.04) GB

E1995

by Robert Bosch GmbH,

Reproduction or handing over to third parties are subject to our written permission.

Discretionary charge 10.– DM

Safety instructions and reading help

1070 072 144 -101

Safety instructions and reading help

Read this instruction manual before comissioning the digital input and out

put modules. Keep this manual in a place where it is always accessible to all

users.

Standard operation

This instruction manual contains all of the information required for standard

operation of the described products. The products described serve as digi

tal input and output modules for a Bosch PLC.

The products described were developed, manufactured, tested and do

cumented in accordance with the relevant safety standards. There should

be no risk of danger to personnel or property if the specifications and safety

instructions relating to the project phase and installation and correct oper

ation of the product are followed.

Qualified personnel

This instruction manual is designed for specially trained PLC personnel.

The relevant requirements are based on the job specifications as described

by the ZVEI, see:

Anforderungsprofile für SPSFachkräfte

I + K SPEKTRUM 19

Hrsg.: ZVEI

Stresemannallee 19

60596 Frankfurt

Federal Republic of Germany

ISSN 0932-5018

This instruction manual is designed for PLC technicians. Specialist knowl

edge of the Bosch PLC is required.

Interventions in the hardware and software of our products which are not

described in this instruction manual may only be performed by our skilled

personnel.

Unqualified interventions in the hardware or software or noncompliance

with the warnings listed in this instruction manual or indicated on the prod

uct may result in serious personal injury or damage to property.

Safety instructions and reading help

VI 1070 072 144-101

Qualified personnel are persons who

Das planning personnel, are familiar with the safety guidelines used

in electrical engineering and automation technology.

Das operating personnel, are familiar with the equipment used in the

field of automation technology and are thus familiar with the operat

ing instructions in this manual.

Das commissioning personnel, are authorized to commission,

ground and classify electric circuits and devices/systems in accord

ance with the relevant safety standards.

Safety instructions on the control components

The following warnings and notices may be indicated on the control com

ponents themselves and have the following meaning:

Danger: High voltage!

Danger: Battery acid!

Electrostaticallysensitive components!

Disconnect at mains before opening!

Pin for connecting PE conductor only!

For screened conductor only!

Safety instructions and reading help

VII

1070 072 144 -101

Safety instructions in this manual

! .

These symbols are used throughout this manual subject to the following

conditions.

DANGER

This symbol is used to warn of the presence of dangerous electrical cur

rent. Insufficient or lacking compliance with these instructions can result in

personal injury.

Safety instructions accompanied by this symbol are serially numbered, for

example 0.1. The appendix provides translations of the safety notes shown

here in all the official EC languages.

DANGER

This symbol is used wherever an insufficient or lacking compliance with in

structions can result in personal injury.

Safety instructions accompanied by this symbol are serially numbered, for

example 0.1. The appendix provides translations of the safety notes shown

here in all the official EC languages.

CAUTION

This symbol is used wherever an insufficient or lacking compliance with in

structions can result in damage to equipment or files.

Safety instructions accompanied by this symbol are serially numbered, for

example 0.1. The appendix provides translations of the safety notes shown

here in all the official EC languages.

This symbol is used to inform the user of special features.

Symbols used

This sign shows that the manual is describing an activity which you have to

perform, e.g.:

LInsert disk 1 into the floppy disk drive.

Safety instructions and reading help

VIII 1070 072 144-101

Safety instructions

DANGER 0.1

Danger to persons and equipment!

Test every new program before operating the system!

CAUTION 0.2

Danger to the module!

Do not insert or remove the module when the control is switched on!

This can destroy the module. Switch off or remove the power supply

module of the control, external power supply and signal voltage before

inserting or removing the module!

CAUTION 0.3

Danger to the module!

All ESD protection measures must be observed when using the mo

dule! Avoid electrostatic discharges!

Observe the following protective measures for electrostatically endan

gered modules (EEM)!

DThe employees responsible for the storage, transport and handling

must be trained in ESD protection.

DEEMs must be stored and transported in the protective packaging

specified.

DEEMs may basically only be handled at special ESD work places set

up specifically for this purpose.

DEmployees, work surfaces and all devices and tools, which could

come into contact with EEMs must be same potential (e.g. earthed).

DWear an approved earthing strap around your wrist. The grounding

bracelet must be connected via a cable with integrated 1 M7resis

tance with the work surface.

DEEMs may on no account come into contact with chargeable ob

jects, these include most plastics.

DWhen inserting EEMs into devices and removing them, the power

source of the device must be switched off.

.We would greatly appreciate any contributions to improve this manual.

If you have any suggestions, please fill out the page provided at the

end of this manual.

Contents

IX1070 072 144 -101

Contents

Page

1 Digital input modules 1-1. . . . . . . . . . . . .

1.1 Input module E 220 V,

order no. 1070 046 267 1-8. . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Input module E 115 V,

order no. 1070 046 427 1-10. . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Input module E 24 V-,

order no. 1070 071 252 1-12. . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Input module E 24 V-,

order no. 1070 047 961

Input module E 24 V- SF,

order no. 1070 075 324 1-16. . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Input module E 24 V-,

order no. 1070 047 963

Input module E 24 V- SF,

order no. 1070 075 330 1-18. . . . . . . . . . . . . . . . . . . . . . . . .

1.6 Input module E 24 V-, 2pin,

order no. 1070 044 312 1-20. . . . . . . . . . . . . . . . . . . . . . . . .

2 Digital output modules 2-1. . . . . . . . . . . .

2.1 Output module A 24/0.2-,

order no. 1070 047 964 2-8. . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Output module A 24/0.5-e,

order no. 1070 050 560 2-10. . . . . . . . . . . . . . . . . . . . . . . . .

2.3 Output module A 24/0.5-,

order no. 1070 048 483

Output module A 24/0.5- SF,

order no. 1070 075 333 2-13. . . . . . . . . . . . . . . . . . . . . . . . .

2.4 Output module A 24/2-,

order no. 1070 048 485

Output module A 24/2- SF,

order no. 1070 075 337 2-15. . . . . . . . . . . . . . . . . . . . . . . . .

2.5 Output module A 24/2-,

order no. 1070 041 348 2-17. . . . . . . . . . . . . . . . . . . . . . . . .

Contents

X1070 072 144-101

Page

2.6 Output module A 24/2-,

order no. 1070 044 305 2-19. . . . . . . . . . . . . . . . . . . . . . . . .

2.7 Output module A 24/2-e,

order no. 1070 050 634 2-21. . . . . . . . . . . . . . . . . . . . . . . . .

2.8 Output module A 230/2

order no. 1070 048 862 2-23. . . . . . . . . . . . . . . . . . . . . . . . .

2.9 Output module AR/2A,

order no. 1070 044 834

Output module AR/2A SF,

order no. 1070 075 340 2-27. . . . . . . . . . . . . . . . . . . . . . . . .

A Appendix

A.1 Abbreviations A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.2 Index A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3 Safety instructions A-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.1 Dansk A-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.2 Deutsch A-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.3 %LLHNIK¼ A-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.4 Español A-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.5 Français A-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.6 Italiano A-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.7 Nederlands A-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.8 Português A-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.9 Suomi A-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3.10 Svenska A-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Illustrations

XI1070 072 144 -101

Illustrations

Fig. Page

1-1 Input modules, specifications 1-3. . . . . . . . . . . . . . . . . . . .

1-2 Input modules, slots PC600 1-4. . . . . . . . . . . . . . . . . . . . .

1-3 Input modules, slots CL300 1-4. . . . . . . . . . . . . . . . . . . . .

1-4 Input modules, slots CL400 1-5. . . . . . . . . . . . . . . . . . . . .

1-5 Input modules, slots CL500 1-5. . . . . . . . . . . . . . . . . . . . .

1-6 Dip switch start address 1-6. . . . . . . . . . . . . . . . . . . . . . . .

1-7 Dip switch, value 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-8 Addressing, input module example 1-7. . . . . . . . . . . . . . .

1-9 Input module 1070 046 267,

terminal assignment 1-8. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-10 Input module 1070 046 267,

input circuit 1-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-11 Input module 1070 046 427,

terminal assignment 1-10. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-12 Input module 1070 046 427,

input circuit 1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-13 Input module 1070 071 252,

terminal assignment 1-12. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-14 Input module 1070 071 252, Switch 1-14. . . . . . . . . . . . . .

1-15 Rotary switch S2, input delay 1-14. . . . . . . . . . . . . . . . . . . .

1-16 Input module 1070 071 252,

input circuit 1-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-17 Input module 1070 047 961 and

1070 075 324, terminal assignment 1-16. . . . . . . . . . . . . .

1-18 Input module 1070 047 961 and

1070 075 324, input circuit 1-17. . . . . . . . . . . . . . . . . . . . . .

1-19 Input module 1070 047 963 and

1070 075 330, terminal assignment 1-18. . . . . . . . . . . . . .

1-20 Input module 1070 047 963 and

1070 075 330, input circuit 1-19. . . . . . . . . . . . . . . . . . . . . .

1-21 Input module 1070 044 312,

terminal assignment 1-20. . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-22 Input module 1070 044 312,

input circuit 1-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Illustrations

XII 1070 072 144-101

Fig. Page

2-1 Output modules, specifications 2-3. . . . . . . . . . . . . . . . . .

2-2 Output modules, slots PC600 2-4. . . . . . . . . . . . . . . . . . . .

2-3 Output modules, slots CL300 2-4. . . . . . . . . . . . . . . . . . . .

2-4 Output modules, slots CL400 2-5. . . . . . . . . . . . . . . . . . . .

2-5 Output modules, slots CL500 2-5. . . . . . . . . . . . . . . . . . . .

2-6 Dip switch start address 2-6. . . . . . . . . . . . . . . . . . . . . . . .

2-7 Dip switch, value 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-8 Addressing, output modules example 2-7. . . . . . . . . . . .

2-9 Output module 1070 047 964,

terminal assignment 2-8. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-10 Output module 1070 047 964,

output circuit 2-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-11 Output module 1070 050 560,

terminal assignment 2-10. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-12 Output module 1070 050 560,

simultaneity/fan unit 2-11. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-13 Output module 1070 050 560,

output circuit 2-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-14 Output module 1070 048 483 and

1070 075 333, terminal assignment 2-13. . . . . . . . . . . . . .

2-15 Output module 1070 048 483 and

1070 075 333, output circuit 2-14. . . . . . . . . . . . . . . . . . . . .

2-16 Output module 1070 048 485 and

1070 075 337, terminal assignment 2-15. . . . . . . . . . . . . .

2-17 Output module 1070 048 485 and

1070 075 337, output circuit 2-16. . . . . . . . . . . . . . . . . . . . .

2-18 Output module 1070 041 348,

terminal assignment 2-17. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-19 Output module 1070 041 348,

output circuit 2-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-20 Output module 1070 044 305,

terminal assignment 2-19. . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-21 Output module 1070 044 305,

output circuit 2-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-22 Output module 1070 050 634,

terminal assignment 2-21. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Bosch E/A-System Handbücher

Bosch

Bosch Rexroth IndraControl S20 Bedienungsanleitung

Bosch

Bosch DS7432 Bedienungsanleitung

Bosch

Bosch D7044 Bedienungsanleitung

Bosch

Bosch FLM-420-I2-E Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl S67 Series Bedienungsanleitung

Bosch

Bosch Rexroth Inline Series Bedienungsanleitung

Bosch

Bosch FLM-420-I2-W Bedienungsanleitung

Bosch

Bosch B208 Bedienungsanleitung

Bosch

Bosch FLM-420-O1I1-E Bedienungsanleitung

Bosch

Bosch B308 Bedienungsanleitung

Bosch

Bosch DS9432B Bedienungsanleitung

Bosch

Bosch segmil D7044M Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl S20 Benutzerhandbuch

Bosch

Bosch FLM-420-I2-D Bedienungsanleitung

Bosch

Bosch B308 Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl S67 Series Benutzerhandbuch

Bosch

Bosch B208 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung