Bosch FLEXIDOME IP NIN-70122 Bedienungsanleitung

FLEXIDOME IP panoramic 7000 MP

NIN-70122

en Installation Manual

Table of contents

1Safety 5

1.1 Safety message explanation 5

1.2 Safety precautions 5

1.3 Important safety instructions 6

1.4 FCC and ICES compliance 7

1.5 Notices 8

2Short information 9

3System overview 10

3.1 Application variants 11

3.2 Using the camera 11

3.3 Operation with external systems 12

3.3.1 Larger surveillance systems 13

4Planning 14

4.1 Unpacking 14

4.2 Contents 14

4.3 System requirements 15

5Installation 16

5.1 Local storage 16

5.2 Ceiling mount 17

5.2.1 Mount flush to ceiling 17

5.2.2 Mounting with a Surface Mount Box 19

5.3 Wall mount 20

5.4 Removing the camera 21

6Network connection 24

6.1 Network (and PoE power) 24

7Configuration 25

7.1 Browser connection 25

7.1.1 Establishing the connection 25

7.1.2 Protected network 25

7.2 Bosch Video Client 26

7.3 Video Security Client 26

8Troubleshooting 27

8.1 LED status overview 27

FLEXIDOME IP

panoramic 7000 MP Table of Contents | en 3

Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684

8.2 Resolving problems 28

8.3 Testing the network connection 31

8.4 Customer service 31

9Maintenance 32

9.1 Cleaning 32

9.1.1 Lens cleaning 32

9.2 Repair 32

9.3 Reset 33

10 Decommissioning 34

10.1 Transfer 34

10.2 Disposal 34

11 Technical data 35

11.1 Specifications 35

11.2 Dimensions 41

4en | Table of Contents FLEXIDOME IP

panoramic 7000 MP

2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems

Safety

Safety message explanation

Caution!

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Notice!

Indicates a situation which, if not avoided, could result in

damage to the equipment or environment, or data loss.

Safety precautions

Caution!

Installation should only be performed by qualified service

personnel in accordance with the National Electrical Code

(NEC 800 CEC Section 60) or applicable local codes.

1.1

1.2

FLEXIDOME IP

panoramic 7000 MP Safety | en 5

Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684

Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings before operating the

device.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install device near any heat sources such as

radiators, heaters, stoves, or other equipment (including

amplifiers) that produce heat.

3. Never spill liquid of any kind on the device.

4. Take precautions to protect the device from power and

lightning surges.

5. Adjust only those controls specified in the operating

instructions.

6. Operate the device only from the type of power source

indicated on the label.

7. Unless qualified, do not attempt to service a damaged

device yourself. Refer all servicing to qualified service

personnel.

8. Install in accordance with the manufacturer's instructions in

accordance with applicable local codes.

9. Use only attachments/accessories specified by the

manufacturer.

10. Protect all connection cables from possible damage,

particularly at connection points.

1.3

6en | Safety FLEXIDOME IP

panoramic 7000 MP

2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems

FCC and ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult the

dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

1.4

FLEXIDOME IP

panoramic 7000 MP Safety | en 7

Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684

Notices

Notice!

Optical elements are sensitive and should be protected at all

times. Do not allow objects to come into contact with glass

surfaces and do not touch optical elements with your fingers.

Notice!

Video loss is inherent to digital video recording; therefore,

Bosch Security Systems cannot be held liable for any damage

that results from missing video information.

To minimize the risk of losing information, we recommend

multiple, redundant recording systems, and a procedure to

back up all analog and digital information.

Notice!

We recommend that memory cards only be used for local

storage of alarm recordings.

1.5

8en | Safety FLEXIDOME IP

panoramic 7000 MP

2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems

Short information

This manual has been compiled with great care and the

information it contains has been thoroughly verified. The text

was correct at the time of printing, however, the content can

change without notice. Bosch Security Systems accepts no

liability for damage resulting directly or indirectly from faults,

incompleteness or discrepancies between this manual and the

product described.

Trademarks

All hardware and software product names used in this document

are likely to be registered trademarks and must be treated

accordingly.

More information

For more information please contact the nearest Bosch Security

Systems location or visit www.boschsecurity.com

http://www.boschsecurity.com/catalog_overview.htm

FLEXIDOME IP

panoramic 7000 MP Short information | en 9

Bosch Security Systems 2015.02 | v1.0 | AM18-Q0684

System overview

The FLEXIDOME IP panoramic 7000 MP is a discreet, aesthetic,

low-profile camera for indoor use. The 12MP sensor operating at

30 fps provides full panoramic surveillance with complete area

coverage, fine details and high speeds. The camera offers full

situational awareness and simultaneous E-PTZ views in high

resolution.

Unobtrusive design and easy installation

The low profile of the camera makes it exceedingly suitable for

installations where aesthetics are important. Its unobtrusive

nature allows it to fit in with architectural features without

detracting from the surroundings. Museums, historic buildings

or impeccably designed interiors will all benefit from the

discreet design.

The camera is easily mounted to any surface using a twist-click

mechanism via the supplied mounting ring. The high quality IR

corrected lens is factory focused and is not restricted by a

bubble, so installation is simplified and sharpness is assured.

The LED indicators, reset button and SD card slot are easily

accessed via two hinges at the front of the camera. A complete

set of indoor mounting accessories, such as a surface mount

box or a pendant pipe mount, are available.

Power for the camera is supplied via a Power-over-Ethernet

compliant network cable connection. With this configuration,

only a single cable connection is required to view, power, and

control the camera.

10 en | System overview FLEXIDOME IP

panoramic 7000 MP

2015.02 | v1.0 | AM18-Q0684 Bosch Security Systems

Andere Handbücher für FLEXIDOME IP NIN-70122

Inhaltsverzeichnis

Andere Bosch IP-Kamera Handbücher

Bosch

Bosch MIC IP fusion 9000i Bedienungsanleitung

Bosch

Bosch NDC-455 Bedienungsanleitung

Bosch

Bosch NEC-070V09-21W Bedienungsanleitung

Bosch

Bosch FLEXIDOME IP indoor 5000 Bedienungsanleitung

Bosch

Bosch NBC-255-P Bedienungsanleitung

Bosch

Bosch TC9376H Bedienungsanleitung

Bosch

Bosch NTC-265-PI Bedienungsanleitung

Bosch

Bosch NIN-70122-F1 Bedienungsanleitung

Bosch

Bosch MIC-7130 Bedienungsanleitung

Bosch

Bosch NBC-455 Bedienungsanleitung

Bosch

Bosch NBC-255-W Gebrauchsanweisung

Bosch

Bosch A1 Security Cameras IR Illuminator 5000... Installations- und Betriebshandbuch

Bosch

Bosch NDN-50022-A3 Bedienungsanleitung

Bosch

Bosch NDC-455 Bedienungsanleitung

Bosch

Bosch NBC-455 Bedienungsanleitung

Bosch

Bosch NDC-455 Bedienungsanleitung

Bosch

Bosch AVIOTEC IPSTARLIGHT 8000 Bedienungsanleitung

Bosch

Bosch EX85 Bedienungsanleitung

Bosch

Bosch MicroDome NDC-274-PT Gebrauchsanweisung

Bosch

Bosch NBC-225-P Bedienungsanleitung

Bosch

Bosch NDN-498 Bedienungsanleitung

Bosch

Bosch LTC 7960 Series Bedienungsanleitung

Bosch

Bosch FLEXIDOME multi 7000i Bedienungsanleitung

Bosch

Bosch DINION 4000 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung