Bosch ICP-CP4TS Bedienungsanleitung

User Guide

Security System

Security Systems

ICP-CP4TS 4.3”

“Touch Classic” User Guide

The Touch Classic is a 21st century graphic user interface for the SolutionTM Classic

range of Bosch security control panels. The low profile stylish 4.3” touchscreen is

simple and logical in use and integrates seamlessly into the modern home.

Settings Fault Zone Status Power Alarm Mute

Touch to

access

emergency

buttons

Touch to

Arm / Disarm

Home Screen

Icons Overview

Access the settings menu

A new fault has occurred

Zone sealed

Zone unsealed No Faults are present

A Fault is present

Zone isolated Silence alarms eg: 24hr

Mains power is OK

Mains power has failed

Zone has an alarm memory

Return to previous screen

Return to Home screen

Go to Emergency screen

System/area is AWAY armed System/area is STAY armed

System/area is DISARMED Access to PANIC buttons

Touchpad

Touch Select “Touchpad” from the menu. The sub menu will display.

1. Clean = Selecting this will present the user with a 10

second countdown clock which disables the

touchscreen to allow cleaning.

2. Auto Brightness Adj. = When YES is selected the display brightness will

automatically adjust to suit the light level in the

room.

3. Brightness = Display brightness adjustment to suit room

lighting. If auto brightness ( above) is selected,

operation of this control allows the Touch

Classic to learn the users brightness preference.

4. Key Click = Volume adjustment of the touch CLICK sound.

5. Sound = Adjust the tone and volume of indications.

6. Identification = Displays the current firmware version

7. Security = Allows changes to the Touch Classic security

settings through the following options.

· Scramble Pinpad. = This option alters the standard keypad to display

the numbers in random patterns to remove the

possibility of a code being revealed by finger

marks on the touchscreen.

· Hide Pin = With this option NO. The pin is displayed in the

four boxes on the keypad screen when entering

a pin. With option YES the pin is not revealed.

· Protect Settings = Selecting YES will force the user to enter a

valid master code for access to any of the

above menu.

Change Telephone Numbers

Touch Select “Dialling from the menu. Enter a valid master code.

The screen will display any existing telephone numbers. To edit touch the number 1, 2

or 3. A keypad will appear allowing entry of the new number. The bin symbol may be

used to delete unwanted numbers.

Touching icons will provide the user with additional information or functions.

NOTE: The Icons displayed will depend on your alarm system configuration.

Icon Overview

*All Areas are ARMED *Some Areas are ARMED

*All Areas are DISARMED Reset latched day alarm output

Note: These * 3 arming icons apply only to partitioned systems.

Arming the security system

1. Touch “Disarmed” icon 2. Touch Arming mode icon 3. PIN + ENTER

Disarming the security system -PIN + ENTER

Settings Menu

Touch =

Menu Description ( Some menu items may not appear depending on installer setup )

1. User Codes = Add, delete or change a users PIN

2. Radio Keyfobs = Add or delete a remote control

3. Date/Time = Change the date and time setting in the alarm panel

4. Dialling = Check, add or change telephone numbers called.

5. Diagnostics = Check system history and test sirens, zones etc

6. Isolate Zones = Turn off selected zones for one arming period

7. Day Alarm on/off = refer to day alarm in your panel’s user manual

8. Control Outputs = refer to Control Outputs in your panel’s user manual

9. Reset Outputs = refer to Control Outputs in your panel’s user manual

10. Names = Add or change names for zones, users and outputs

Menu Description

11. Touchpad = Alter settings such as sound and brightness.

12. Installation = Access to installation settings ( installer use only )

Add, Change or Delete a User Code

Touch Select “ User Codes “ from the menu

Enter a master code Select User to add or change Enter new code

To delete touch bin icon

Isolate a Zone

Touch Select “ Isolate Zones “ from the menu

Touch the “NO” button to change state

Touch to return to home screen . The zone status icon will now switch to white

in colour. Isolation is for one arming period only.

Names

Zones and user codes can have custom names assigned via this option.

Touch Select “Names” from the menu then “Zones” or “Users.”

Touch to modify name Touch to select Name Editing Touch to delete name

predefined names

The above method applies to user names also.