Bosch GLL 100 G Montageanleitung

Operating / Safety Instructions

Consignes d’utilisation / de sécurité

Instrucciones de funcionamiento y seguridad

GLL 100 G

GLL 100 GX

IMPORTANT:

Read Before Using

IMPORTANT :

Lire avant usage

IMPORTANTE:

Leer antes de usar

English Version

See page 7

Version française

Voir page 34

Versión en español

Ver la página 65

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com

-2-

GLL 100 G

GLL 100 GX

9 10

Off

3 4

500-540

-3-

-4-

-5-

D1 F1

H I

-6-

B2 C2

D2 F2

-7-

1 608 M00 70K

BT 150

(0 601 096 B10)

1 600 A00 XD1

BM 1 (0 601 015 A11)

1 600 A00 19K

RM 1 (0 601 092 610)

BP 350

(0 601 015 B10)

RM 2 (0 601 092 710)

1 618 C01 44F

1 618 C01 44K

Professional

(1 600 A00 19K)

BM 3 (1 600 A00 19K)

14 14

13 13

14 14

-8-

Safety Symbols

The definitions below describe the level of severity for each signal

word. Please read the manual and pay attention to these symbols.

This is the safety alert symbol. It is used

to alert you to potential personal injury

hazards. Obey all safety messages that

follow this symbol to avoid possible injury

or death.

DANGER indicates a hazardous situation

which, if not avoided, will result in death

or serious injury.

WARNING indicates a hazardous

situation which, if not avoided, will result

in death or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation

which, if not avoided, will result in minor

or moderate injury.

-9-

Read all instructions. Failure to follow all

instructions listed below may result in hazardous

radiation exposure, electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR

FUTURE REFERENCE

The term “tool” in the warnings listed below refers to your mains-

operated (corded) tool or battery-operated (cordless) tool.

The following labels are

on your laser tool for your

convenience and safety.

They indicate where the

laser light is emitted by the

tool. ALWAYS BE AWARE of their location when using the tool.

DO NOT direct the laser beam at persons or animals and do not

stare into the laser beam yourself. This tool produces

laser class 2 laser radiation and complies with 21 CFR

1040.10 and 1040.11 except for deviations pursuant

to Laser Notice No. 50, dated June 24, 2007. This can

lead to persons being blinded.

DO NOT remove or deface any warning or caution labels.

Removing labels increases the risk of exposure to laser

radiation.

Use of controls or adjustments or performance of

procedures other than those specified in this manual, may

result in hazardous radiation exposure.

ALWAYS make sure that any bystanders in the vicinity of

use are made aware of the dangers of looking directly into

the laser tool.

General Safety Rules

500-540

-10-

DO NOT place the laser tool in a position that may cause

anyone to stare into the laser beam intentionally or

unintentionally. Serious eye injury could result.

ALWAYS position the laser tool securely. Damage to the

laser tool and/or serious injury to the user could result if the

laser tool falls.

ALWAYS use only the accessories that are recommended

by the manufacturer of your laser tool. Use of accessories

that have been designed for use with other laser tools could

result in serious injury or unsatisfactory performance.

DO NOT use this laser tool for any purpose other than

those outlined in this manual. This could result in serious

injury or unsatisfactory performance.

DO NOT leave the laser tool “ON” unattended in any

operating mode.

DO NOT disassemble the laser tool. There are no user

serviceable parts inside. Do not modify the product in any

way. Modifying the laser tool may result in hazardous laser

radiation exposure.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

DO NOT operate the laser tool around children or allow children

to operate the laser tool. Serious eye injury could result.

Do not operate the measuring tool in explosive environments,

such as in the presence of ﬂammable liquids, gases or dusts.

Sparks can be created in the measuring tool which may ignite the

dust or fumes.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Laser-Nivelliergerät Handbücher

Bosch

Bosch Professional GLL 50 G Bedienungsanleitung

Bosch

Bosch GLL 2-50 Professional Betriebsanleitung

Bosch

Bosch Professional GLL Series Bedienungsanleitung

Bosch

Bosch GTL 3 Professional Montageanleitung

Bosch

Bosch PCL 20 Bedienungsanleitung

Bosch

Bosch Quigo Bedienungsanleitung

Bosch

Bosch Professional GRL 350 HV Bedienungsanleitung

Bosch

Bosch Professional GLL 2-20 G Bedienungsanleitung

Bosch

Bosch GLL 50 Montageanleitung

Bosch

Bosch PCL 1 Bedienungsanleitung

Bosch

Bosch WEU Zamo Bedienungsanleitung

Bosch

Bosch Professional GLL 3-80 G Bedienungsanleitung

Bosch

Bosch Professional GLL 2-15 G Bedienungsanleitung

Bosch

Bosch GCL100-80C Montageanleitung

Bosch

Bosch GPL5E Montageanleitung

Bosch

Bosch GPL 5 Bedienungsanleitung

Bosch

Bosch GCL 2-160 Montageanleitung

Bosch

Bosch GPL 5 Professional Bedienungsanleitung

Bosch

Bosch GLL 2-80 P Professional Bedienungsanleitung

Bosch

Bosch RC5 Montageanleitung

Bosch

Bosch GRL 500 HV Bedienungsanleitung

Bosch

Bosch Quigo Bedienungsanleitung

Bosch

Bosch Professional GOL 20D Bedienungsanleitung

Bosch

Bosch GPL 3 Professional Montageanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung