Bosch VJD-8000 Bedienungsanleitung

IP Matrix 9.60 for KBD Digital

VJD‑8000 | VJD‑7513

en Operation manual

IP Matrix 9.60 for KBD Digital Table of contents | en 3

Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC

Table of contents

1Introduction 4

1.1 About the manual 4

1.2 Conventions in this manual 4

1.3 Additional documentation 4

2Requirements 5

3Restrictions 6

4Operation 7

4.1 Keyboard layout 7

4.2 Softkey description 8

4.2.1 Softkey mapping keypad section 8

4.2.2 Softkey mapping main menu 9

4.2.3 Softkey mapping extended functions 10

4.2.4 Softkey mapping playback menu 11

4.3 Keyboard operations 12

4.3.1 Connecting a camera to a monitor 12

4.3.2 Selecting a monitor 12

4.3.3 Controlling playback speed factor 12

4.3.4 Controlling PTZ cameras 13

4.3.5 Locking/unlocking the keyboard 13

5Troubleshooting 14

4en | Introduction IP Matrix 9.60 for KBD Digital

2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.

1 Introduction

1.1 About the manual

This manual describes how to use the keyboard with the IPMatrix application.

1.2 Conventions in this manual

The following symbols and notations are used to draw attention to special situations:

Notice!

This symbol indicates special features and provides tips and information for easier, more

convenient use of the software.

Terms that you can find in the program, such as menu options, commands or text in the user

interface, are written in bold.

1.3 Additional documentation

Notice!

Read and follow the instructions in the hardware documentation

While setting up the hardware for IPMatrix, read and follow the instructions of the hardware

documentation. The documentation contains important safety messages. It is mandatory to

read and understand the safety messages prior to installation of the hardware.

More information

Find more information, software downloads, and documentation at:

www.boschsecurity.com and the respective product page.

IP Matrix 9.60 for KBD Digital Requirements | en 5

Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC

2 Requirements

A prerequisite for using the keyboard is that the required hardware for an IPMatrix system is

available and configured appropriately.

Requirements for installed software

The Configuration Manager 7.0 program or later is required.

Requirements for operational purpose

Make sure the following requirements are fulfilled:

– 1 to 4ready-to-use Bosch VIDEOJET decoder with firmware 9.60 or later connected to a

surveillance network (fully installed and ready for operation)

– 1 to 4KBD-UXF or KBD-Digital keyboards (fully installed and ready for operation)

– 1 to 8displays with appropriate interface connections or adapters

Note: Up to 2displays per decoder can be connected.

– Fixed or moving cameras connected to the surveillance network

– A PC with Bosch Configuration Manager program installed and connected to the

surveillance network (only for configuration purposes)

Notice!

Prior to operation, the IPMatrix application must be configured using the Configuration

Manager program.

IPMatrix configuration

The IPMatrix application can be configured using the Configuration Manager 7.0 program or

later.

For detailed configuration steps, refer to the IPMatrix configuration manual available on the

online product catalog.

6en | Restrictions IP Matrix 9.60 for KBD Digital

2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.

3 Restrictions

Observe the following restrictions when using a IPMatrix system:

– The decoder dynamically adapts its performance to high loads by skipping frames, which

can cause juddering in the video stream.

– Playback is only possible from local recordings, not from recordings managed by VRM.

– A long i-frame distance leads to less exact navigation in playback mode and lower

performance in playback backwards mode.

IP Matrix 9.60 for KBD Digital Operation | en 7

Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC

4 Operation

After configuring the IPMatrix application using a PC with the Configuration Manager

program, the IPMatrix application operates as a stand-alone CCTV surveillance system. All

operations are carried out using the attached keyboard.

4.1 Keyboard layout

The following graphic illustrates the different groups of keys on the keyboard.

2 2 3 4 5 6 87 9

1Softkey display with soft key

description (mode dependent)

2Softkeys

3Keypad section: numeric keys 4Keypad section: function keys

5Keypad section: status display 6Joystick

Use to pan or tilt a PTZ device.

Use to move the field of view in a

digitally zoomed viewing pane

7Rotatable knob

Use to control the zoom function of a

device or the built-in digital zoom

factor.

8Focus

Press to adjust the Focus respectively.

9Iris

Press to adjust the Iris respectively.

8en | Operation IP Matrix 9.60 for KBD Digital

2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.

4.2 Softkey description

4.2.1 Softkey mapping keypad section

Function keys

Prod - Selects the keyboard operation mode

4Press the key to select the operation mode of the keyboard.

Mon - Connects a specific camera to a monitor

4Press the key to connect a specific camera to a specific monitor.

Clr - Clear - cancels a function

4Press the key to cancel a function.

Alarm

Not used

Shot

Not used

1 …. 0 Number keys

4Use to select favorite views, sequences or single devices.

IP Matrix 9.60 for KBD Digital Operation | en 9

Bosch Security Systems B.V. Operation manual 2019-12 | V1 | DOC

4.2.2 Softkey mapping main menu

Main menu without playback permission Main menu with playback permission

Logout - Locks/unlocks the keyboard

4Press the key to lock or unlock the keyboard.

Extended Functions - Displays the extended functions menu

4Press the key to display the extended functions menu.

Playback Menu - Displays the playback functions

4Press the key to display the playback functions.

Note: Only available with playback permission

Previous Layout - Switches to previous layout with less monitors

4Press the key to decrease the number of monitors on the current display.

Note: This key provides a round-trip function. The last layout starts again, if the first layout is

reached.

Next Layout - Switches to next layout with less monitors

4Press the key to increase the number of monitors on the current display.

Note: This key provides a round-trip function. The first layout starts again, if the last layout is

reached.

Previous Monitor - Selects the previous monitor

4Press the key to select the previous monitor.

10 en | Operation IP Matrix 9.60 for KBD Digital

2019-12 | V1 | DOC Operation manual Bosch Security Systems B.V.

Next Monitor - Selects the next monitor

4Press the key to select the previous monitor.

Previous Camera - Displays previous camera

4Press the key to display the previous camera on the selected monitor.

Next Camera - Displays next camera

4Press the key to display the next camera on the selected monitor.

Full Screen - Turns full-screen of currently selected monitor on/off

4Press the key to turn full-screen on or off.

Freeze - Freezes video on monitors on/off

In live mode:

4Press the key to freeze/unfreeze the video on all monitors.

Note: Selecting another layout, camera or monitor also unfreezes the video.

4.2.3 Softkey mapping extended functions

Show Mon ID - Displays the monitor numbers and decoder IP addresses

4Press the key to display the monitor numbers and decoder IP addresses as overlay on the

monitors.

PIP - Turns full-screen with picture-in-picture on/off

4Press the key to turn full-screen with picture-in-picture on or off.

Show Cam ID - Displays the camera numbers and camera IP addresses

Andere Handbücher für VJD-8000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Medienkonverter Handbücher

Bosch

Bosch VIP-X1600-XFM4A Bedienungsanleitung

Bosch

Bosch Rexroth EFC 3600 Bedienungsanleitung

Bosch

Bosch VIP X1600 Module Bedienungsanleitung

Bosch

Bosch VIP-X1XF Bedienungsanleitung

Bosch

Bosch VJD-3000 Bedienungsanleitung

Bosch

Bosch Rexroth VFC 3210 Bedienungsanleitung

Bosch

Bosch VIDEOJET multi 4000 Bedienungsanleitung

Bosch

Bosch VJD-8000 Bedienungsanleitung

Bosch

Bosch AMC MUX Bedienungsanleitung

Bosch

Bosch VJD-8000 Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl S67 Series Benutzerhandbuch

Bosch

Bosch VIP-X16XF-E Bedienungsanleitung

Bosch

Bosch VIP XD HD Decoder Bedienungsanleitung

Bosch

Bosch VJD-7000 Bedienungsanleitung

Bosch

Bosch VJD-8000 Bedienungsanleitung

Bosch

Bosch Rexroth EFC 3600 Bedienungsanleitung

Bosch

Bosch Rexroth 4WRPEH6 3X Bedienungsanleitung

Bosch

Bosch VIP-X16XF-E Bedienungsanleitung

Bosch

Bosch VG4-SFPSCKT Bedienungsanleitung

Bosch

Bosch VIDEOJET decoder 3000 Bedienungsanleitung

Bosch

Bosch VIDEOJET connect 7000 Bedienungsanleitung

Bosch

Bosch REXROTH EFC 610 Series Bedienungsanleitung

Bosch

Bosch Rexroth VFC 3210 Bedienungsanleitung

Bosch

Bosch AMC MUX Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung