Bosch DINION IP starlight 7000 HD Bedienungsanleitung

DINION IP 7000 HD

NBN-71022 | NBN-71027 | NBN-71013

en Installation manual

Table of contents

1Safety 5

1.1 Safety message explanation 5

1.2 Safety precautions 5

1.3 Important safety instructions 6

1.4 FCC and ICES compliance 7

1.5 Notices 8

2Short information 9

3System overview 10

3.1 DINION IP 7000 family 10

3.2 Using the camera 11

3.3 Operation with external systems 12

4Planning 13

4.1 Unpacking 13

4.2 Contents 13

4.3 System requirements 13

5Installation 14

5.1 Lens mounting 14

5.2 Mounting the camera 16

5.3 Local storage 17

6Connection 18

6.1 Network (and PoE power) 18

6.2 Auxiliary power 20

6.3 Alarm 22

6.4 Audio 24

6.5 Video monitor 25

6.6 Data 26

7Configuration 27

7.1 Setting the field of view 27

7.1.1 Camera install wizard 27

7.1.2 Using the install wizard 28

7.2 True Day/Night switching 30

7.3 Camera configuration 31

7.3.1 Bosch Video Client 31

DINION IP 7000 HD Table of Contents | en 3

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0674

7.4 Browser connection 32

7.4.1 Establishing the connection 32

7.4.2 Protected network 32

8Troubleshooting 33

8.1 Function test 33

8.2 Resolving problems 33

8.3 Testing the network connection 37

8.4 Customer service 37

8.5 Terminal program 38

9Maintenance 40

9.1 Cleaning 40

9.2 Repair 40

9.3 Reset 40

10 Decommissioning 41

10.1 Transfer 41

10.2 Disposal 41

11 Technical data 42

11.1 Specifications (NBN-71022) 42

11.2 Specifications (NBN-71027) 45

11.3 Specifications (NBN-71013) 48

11.4 Common specifications 51

4en | Table of Contents DINION IP 7000 HD

2014.09 | v1.0 | AM18-Q0674 Bosch Security Systems

Safety

Safety message explanation

Caution!

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Notice!

Indicates a situation which, if not avoided, could result in

damage to the equipment or environment, or data loss.

Safety precautions

Caution!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Caution!

Installation should only be performed by qualified service

personnel in accordance with the National Electrical Code

(NEC 800 CEC Section 60) or applicable local codes.

Caution!

This device must be connected to earth (ground).

Safety (power) ground is indicated by the symbol.

1.1

1.2

DINION IP 7000 HD Safety | en 5

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0674

Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings before operating the

unit.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install unit near any heat sources such as radiators,

heaters, stoves, or other equipment (including amplifiers)

that produce heat.

3. Never spill liquid of any kind on the unit.

4. Take precautions to protect the unit from power and

lightning surges.

5. Adjust only those controls specified in the operating

instructions.

6. Operate the unit only from the type of power source

indicated on the label.

7. Unless qualified, do not attempt to service a damaged unit

yourself. Refer all servicing to qualified service personnel.

8. Install in accordance with the manufacturer's instructions in

accordance with applicable local codes.

9. Use only attachments/accessories specified by the

manufacturer.

10. Connect the earth terminal of the camera to the system

earth of the installation to ensure correct safety and

EMC/RFI protection.

1.3

6en | Safety DINION IP 7000 HD

2014.09 | v1.0 | AM18-Q0674 Bosch Security Systems

FCC and ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult the

dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

1.4

DINION IP 7000 HD Safety | en 7

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0674

Notices

Notice!

Optical elements are sensitive and should be protected at all

times. Do not allow objects to come into contact with glass

surfaces and do not touch optical elements with your fingers.

Notice!

Video loss is inherent to digital video recording; therefore,

Bosch Security Systems cannot be held liable for any damage

that results from missing video information.

To minimize the risk of losing information, we recommend

multiple, redundant recording systems, and a procedure to

back up all analog and digital information.

Notice!

We recommend that memory cards only be used for local

storage of alarm recordings.

1.5

8en | Safety DINION IP 7000 HD

2014.09 | v1.0 | AM18-Q0674 Bosch Security Systems

Short information

This manual has been compiled with great care and the

information it contains has been thoroughly verified. The text

was correct at the time of printing, however, the content can

change without notice. Bosch Security Systems accepts no

liability for damage resulting directly or indirectly from faults,

incompleteness or discrepancies between this manual and the

product described.

Trademarks

All hardware and software product names used in this document

are likely to be registered trademarks and must be treated

accordingly.

More information

For more information please contact the nearest Bosch Security

Systems location or visit www.boschsecurity.com

DINION IP 7000 HD Short information | en 9

Bosch Security Systems 2014.09 | v1.0 | AM18-Q0674

System overview

DINION IP 7000 family

The DINION IP 7000 family consists of high-performance HD

surveillance cameras with superior imaging qualities:

– DINION IP 7000 HD for intelligent HD surveillance

– DINION IP dynamic 7000 HD for high dynamic range scenes

– DINION IP starlight 7000 HD for high-performance in

challenging low light conditions

These IP cameras operate as network video servers and transmit

video and control signals over Ethernet LANs and the Internet.

The integrated encoder uses H.264 compression technology to

give clear images while reducing bandwidth and storage

requirements.

The cameras are easy to install and ready to use, and are

eminently suitable for integration into large video surveillance

systems.

Content-Based Imaging Technology

Content-Based Imaging Technology (C-BIT) is used to radically

improve image quality in all lighting conditions and to identify

areas for enhanced processing. The camera examines the scene

using intelligent video analytics and provides feedback to re-

tune the image processing. This provides better detail in the

areas that matter and better all-round performance.

Hybrid operation

A surge-protected analog video output allows full hybrid

operation. This means that high resolution IP video streaming

and an analog video output via an SMB connector are available

simultaneously. The hybrid functionality offers an easy migration

path from legacy CCTV to a modern IP-based system.

3.1

10 en | System overview DINION IP 7000 HD

2014.09 | v1.0 | AM18-Q0674 Bosch Security Systems

Andere Handbücher für DINION IP starlight 7000 HD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Sicherheitskamera Handbücher

Bosch

Bosch AutoDome Junior HD VJR Series Bedienungsanleitung

Bosch

Bosch VDC-445V03-20S Bedienungsanleitung

Bosch

Bosch FlexiDomeXF VDC-485V03-20 Bedienungsanleitung

Bosch

Bosch MIC IP fusion 9000i Bedienungsanleitung

Bosch

Bosch FCS-8000-VFD-B Bedienungsanleitung

Bosch

Bosch VG4 Series Bedienungsanleitung

Bosch

Bosch NDP-5523-Z30L Bedienungsanleitung

Bosch

Bosch FLEXIDOME AN outdoor 4000 Bedienungsanleitung

Bosch

Bosch Dinion XF LTC 0620/11 Installationsanleitung

Bosch

Bosch VJR-F801-ICCV Bedienungsanleitung

Bosch

Bosch LTC 0435 Series Bedienungsanleitung

Bosch

Bosch MIC400 PTZ Bedienungsanleitung

Bosch

Bosch NPD-5512-Z30 Bedienungsanleitung

Bosch

Bosch Camera Bedienungsanleitung

Bosch

Bosch VG4 Series Bedienungsanleitung

Bosch

Bosch EX65 Bedienungsanleitung

Bosch

Bosch DINION IP thermal 8000 Bedienungsanleitung

Bosch

Bosch AutoDome 300 Series Bedienungsanleitung

Bosch

Bosch AutoDome 100 Series Bedienungsanleitung

Bosch

Bosch VG4-161-CC0 Bedienungsanleitung

Bosch

Bosch DINION HD 1080p HDR Bedienungsanleitung

Bosch

Bosch VOT-320V0xxL Bedienungsanleitung

Bosch

Bosch DINION 5000 Bedienungsanleitung

Bosch

Bosch MIC IP starlight 7000i Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung