Bosch NDC-255-P Bedienungsanleitung

IP Dome Camera 200 Series

NDC-255-P / NDC-225-P

en Installation and Operation Manual

IP Camera 200 Series Table of Contents | en 3

Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05

Table of Contents

1Safety 7

1.1 Safety precautions 7

1.2 Important safety instructions 8

1.3 FCC & ICES compliance 9

1.4 UL certification 11

1.5 Bosch notices 11

1.6 Copyrights 12

2 Introduction 13

2.1 Features 13

2.2 Unpacking 14

3 Installation 15

3.1 Disassembly 15

3.2 MicroSDHC card 16

3.3 Power connection 17

3.3.1 DC power connection 17

3.4 Network (and power) connector 18

3.5 I/O connector 19

3.6 Audio connectors 20

3.7 Mounting 21

3.8 Camera set-up 22

3.8.1 Camera positioning 22

3.8.2 Focal length and focus (NDC-255-P) 24

3.9 Resetting the camera 25

3.10 Closing the unit 25

4 Browser connection 26

4.1 System requirements 26

4.2 Establishing the connection 26

4.2.1 Password protection in camera 27

4.3 Protected network 27

4.4 Connection established 28

4en | Table of Contents IP Camera 200 Series

AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems

4.4.1 LIVEPAGE 28

4.4.2 RECORDINGS 28

4.4.3 SETTINGS 28

5 Basic Mode 30

5.1 Basic Mode menu tree 30

5.2 Device Access 31

5.2.1 Camera name 31

5.2.2 Password 31

5.3 Date/Time 32

5.4 Network 33

5.5 Encoder Profile 34

5.6 Audio 34

5.7 Recording 34

5.7.1 Storage medium 34

5.8 System Overview 34

6 Advanced Mode 35

6.1 Advanced Mode menu tree 35

6.2 General 36

6.2.1 Identification 36

6.2.2 Password 36

6.2.3 Date/Time 37

6.2.4 Display Stamping 39

6.3 Web Interface 41

6.3.1 Appearance 41

6.3.2 LIVEPAGE Functions 42

6.3.3 Logging 43

6.4 Camera 44

6.4.1 Encoder Profile 44

6.4.2 Encoder Streams 47

6.4.3 Video 48

6.4.4 Audio 49

6.4.5 Installer Options 49

6.5 Recording 50

6.5.1 Storage Management 51

IP Camera 200 Series Table of Contents | en 5

Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05

6.5.2 Recording Profiles 54

6.5.3 Retention Time 55

6.5.4 Recording Scheduler 56

6.5.5 Recording Status 57

6.6 Alarm 58

6.6.1 Alarm Connections 58

6.6.2 Video Content Analyses (VCA) 61

6.6.3 VCA configuration- Profiles 62

6.6.4 VCA configuration - Scheduled 68

6.6.5 VCA configuration - Event triggered 70

6.6.6 Audio Alarm 71

6.6.7 Alarm E-Mail 72

6.7 Interfaces 74

6.7.1 Alarm input 74

6.7.2 Relay 74

6.8 Network 76

6.8.1 Network 76

6.8.2 Advanced 80

6.8.3 Multicasting 81

6.8.4 JPEG Posting 82

6.9 Service 84

6.9.1 Maintenance 84

6.9.2 System Overview 86

7 Operation via the browser 87

7.1 Livepage 87

7.1.1 Processor load 87

7.1.2 Image selection 88

7.1.3 Digital I/O 88

7.1.4 System Log / Event Log 88

7.1.5 Saving snapshots 88

7.1.6 Recording video sequences 88

7.1.7 Running recording program 89

7.1.8 Audio communication 89

7.2 Recordings page 90

7.2.1 Controlling playback 91

6en | Table of Contents IP Camera 200 Series

AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems

8Troubleshooting 93

8.1 Resolving problems 93

8.2 Customer service 93

9 Maintenance 94

9.1 Repairs 94

9.1.1 Transfer and disposal 94

10 Technical Data 95

10.1 Specifications 95

10.1.1 Accessories 96

IP Camera 200 Series Safety | en 7

Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the device.

8en | Safety IP Camera 200 Series

AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Heed all warnings on the unit and in the

operating instructions before operating the unit.

1. Cleaning - Generally, using a dry cloth for cleaning is

sufficient but a moist, fluff-free cloth or leather shammy

may also be used. Do not use liquid cleaners or aerosol

cleaners.

2. Heat Sources - Do not install the unit near any heat

sources such as radiators, heaters, stoves, or other

equipment (including amplifiers) that produce heat.

3. Water - Never spill liquid of any kind on the unit.

4. Lightning - Take precautions to protect the unit from

power and lightning surges.

5. Controls adjustment - Adjust only those controls specified

in the operating instructions. Improper adjustment of

other controls may cause damage to the unit.

6. Power sources - Operate the unit only from the type of

power source indicated on the label.

7. Servicing - Unless qualified, do not attempt to service this

unit yourself. Refer all servicing to qualified service

personnel.

8. Replacement parts - Use only replacement parts specified

by the manufacturer.

9. Installation - Install in accordance with the manufacturer's

instructions and in accordance with applicable local codes.

10. Attachments, changes or modifications - Only use

attachments/accessories specified by the manufacturer.

Any change or modification of the equipment, not

expressly approved by Bosch, could void the warranty or,

in the case of an authorization agreement, authority to

operate the equipment.

IP Camera 200 Series Safety | en 9

Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05

1.3 FCC & ICES compliance

FCC & ICES Information

(U.S.A. and Canadian Models Only)

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– reorient or relocate the receiving antenna;

– increase the separation between the equipment and

receiver;

– connect the equipment into an outlet on a circuit different

from that to which the receiver is connected;

– consult the dealer or an experienced radio/TV technician

for help.

Intentional or unintentional modifications, not expressly

approved by the party responsible for compliance, shall not be

made. Any such modifications could void the user's authority to

operate the equipment. If necessary, the user should consult

the dealer or an experienced radio/television technician for

corrective action.

The user may find the following booklet, prepared by the

Federal Communications Commission, helpful: How to Identify

and Resolve Radio-TV Interference Problems. This booklet is

available from the U.S. Government Printing Office,

Washington, DC 20402, Stock No. 004-000-00345-4.

10 en | Safety IP Camera 200 Series

AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems

Informations FCC et ICES

(modèles utilisés aux États-Unis et au Canada uniquement)

Suite à différents tests, cet appareil s'est révélé conforme aux

exigences imposées aux appareils numériques de classe B, en

vertu de la section 15 du règlement de la Commission fédérale

des communications des États-Unis (FCC), et en vertu de la

norme ICES-003 d'Industrie Canada. Ces exigences visent à

fournir une protection raisonnable contre les interférences

nuisibles lorsque l'appareil est utilisé dans le cadre d'une

installation résidentielle. Cet appareil génère, utilise et émet

de l'énergie de radiofréquences et peut, en cas d'installation ou

d'utilisation non conforme aux instructions, engendrer des

interférences nuisibles au niveau des radiocommunications.

Toutefois, rien ne garantit l'absence d'interférences dans une

installation particulière. Il est possible de déterminer la

production d'interférences en mettant l'appareil

successivement hors et sous tension, tout en contrôlant la

réception radio ou télévision. L'utilisateur peut parvenir à

éliminer les interférences éventuelles en prenant une ou

plusieurs des mesures suivantes:

– Modifier l'orientation ou l'emplacement de l'antenne

réceptrice;

– Éloigner l'appareil du récepteur;

– Brancher l'appareil sur une prise située sur un circuit

différent de celui du récepteur;

– Consulter le revendeur ou un technicien qualifié en radio/

télévision pour obtenir de l'aide.

Toute modification apportée au produit, non expressément

approuvée par la partie responsable de l'appareil, est

strictement interdite. Une telle modification est susceptible

d'entraîner la révocation du droit d'utilisation de l'appareil.

La brochure suivante, publiée par la Commission fédérale des

communications (FCC), peut s'avérer utile : How to Identify and

Resolve Radio-TV Interference Problems. Cette brochure est

disponible auprès du U.S. Government Printing Office,

Washington, DC 20402, États-Unis, sous la référence n° 004-

000-00345-4.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Sicherheitskamera Handbücher

Bosch

Bosch VJR SERIES Bedienungsanleitung

Bosch

Bosch VDN-498V03-21S Bedienungsanleitung

Bosch

Bosch DINION 3100i IR NBE-3702-AL Bedienungsanleitung

Bosch

Bosch VG4-161-CC0 Bedienungsanleitung

Bosch

Bosch Divar DVR16E2302 Bedienungsanleitung

Bosch

Bosch AutoDome 100 Series Bedienungsanleitung

Bosch

Bosch DINION IP imager 9000 HD Bedienungsanleitung

Bosch

Bosch REG-L1 Bedienungsanleitung

Bosch

Bosch Dinion XF LTC 0495/11 Bedienungsanleitung

Bosch

Bosch DINION IP starlight 7000 HD Bedienungsanleitung

Bosch

Bosch VG5 600 Series Bedienungsanleitung

Bosch

Bosch DINION IP 7000 HD NBN-71022 Bedienungsanleitung

Bosch

Bosch LTC 7935 Bedienungsanleitung

Bosch

Bosch BasicDome Series Bedienungsanleitung

Bosch

Bosch VG4 Series Bedienungsanleitung

Bosch

Bosch VG4-100 Series Bedienungsanleitung

Bosch

Bosch NDC-225-P Bedienungsanleitung

Bosch

Bosch AUTODOME IP starlight 5100i Bedienungsanleitung

Bosch

Bosch LTC 0x35 Series Bedienungsanleitung

Bosch

Bosch AN traffic 4000 IR Bedienungsanleitung

Bosch

Bosch Diniop IP - NWC-0455 Bedienungsanleitung

Bosch

Bosch WZ45 Bedienungsanleitung

Bosch

Bosch EX30-IP Bedienungsanleitung

Bosch

Bosch VEZ Series Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung