Bosch VOT-320 Bedienungsanleitung

VOT-320

VOT-320V0xxx

en Installation and Operating Manual

VOT-320 Table of Contents | en 3

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09

Table of Contents

1Preface 6

1.1 About this manual 6

1.2 Conventions in this manual 6

1.3 Intended use 6

1.4 EU Directives 7

1.5 Rating plate 7

2 Safety information 8

2.1 Electric shock hazard 8

2.2 Installation and operation 8

2.3 Maintenance and repair 9

3 Product description 10

3.1 Parts included 10

3.2 System requirements 11

3.3 Overview of functions 12

3.4 Controls and displays on the camera module 15

3.5 Connections on the camera module 16

4 Installation 17

4.1 Preparations 17

4.2 Mounting 17

4.3 Connections 19

4.4 Power on/power off 21

4.5 Adjusting the lens (only WFOV lenses) 22

4.6 Final assembly 22

4.7 Setup using Bosch Video Client 22

5 Configuration using a Web browser 24

5.1 Connecting 24

5.2 Configuration menu 26

5.3 Basic Mode: Device Access 28

5.4 Basic Mode: Date/Time 29

5.5 Basic Mode: Network 30

5.6 Basic Mode: Encoder 31

5.7 Basic Mode: Recording 32

5.8 Basic Mode: System Overview 32

5.9 Advanced Mode: Identification 33

5.10 Advanced Mode: Password 34

5.11 Advanced Mode: Date/Time 35

5.12 Advanced Mode: Display Stamping 36

5.13 Advanced Mode: Appearance 37

5.14 Advanced Mode: LIVEPAGE Functions 38

5.15 Advanced Mode: Logging 39

5.16 Advanced Mode: Picture Settings 40

4en | Table of Contents VOT-320

DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

5.17 Advanced Mode: Encoder Profile 40

5.18 Advanced Mode: Encoder Streams 43

5.19 Advanced Mode: Storage Management 45

5.20 Advanced Mode: Recording Profiles 48

5.21 Advanced Mode: Retention Time 50

5.22 Advanced Mode: Recording Scheduler 51

5.23 Advanced Mode: Recording Status 53

5.24 Advanced Mode: Alarm Connections 53

5.25 Advanced Mode: VCA 56

5.26 Advanced Mode: VCA profiles 57

5.27 Advanced Mode: VCA Scheduled 60

5.28 Advanced Mode: VCA Event triggered 62

5.29 Advanced Mode: Alarm E-Mail 63

5.30 Advanced Mode: Alarm Task Editor 65

5.31 Advanced Mode: Alarm Inputs 66

5.32 Advanced Mode: Relay 66

5.33 Advanced Mode: COM1 68

5.34 Advanced Mode: Network 69

5.35 Advanced Mode: Advanced 73

5.36 Advanced Mode: Multicast 75

5.37 Advanced Mode: FTP Posting 76

5.38 Advanced Mode: Encryption 77

5.39 Advanced Mode: Maintenance 77

5.40 Advanced Mode: Licenses 79

5.41 Advanced Mode: System Overview 80

5.42 Function test 81

6Operation 82

6.1 Operation with Microsoft Internet Explorer 82

6.2 The LIVEPAGE 84

6.3 Saving snapshots 87

6.4 Recording video sequences 87

6.5 Running recording program 87

6.6 The RECORDINGS page 88

6.7 Hardware connections between video servers 90

6.8 Operation using software decoders 92

7 Maintenance and upgrades 93

7.1 Testing the network connection 93

7.2 Camera reset 93

7.3 Fuse replacement 94

7.4 Repairs 94

7.5 Transfer and disposal 94

7.6 Export limitations 94

8 Appendix 95

8.1 Troubleshooting 95

8.2 General malfunctions 95

8.3 Malfunctions with iSCSI connections 97

VOT-320 Table of Contents | en 5

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09

8.4 LEDs 97

8.5 Processor load 98

8.6 Network connection 98

8.7 Serial interface 98

8.8 Terminal blocks 99

8.9 Communication with terminal program 101

8.10 Copyrights 103

9 Specifications 104

9.1 Camera 104

9.2 Detector 104

9.3 Protocols/standards 105

Glossary 106

Index 111

6en | Preface VOT-320

DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

1Preface

1.1 About this manual

This manual is intended for persons responsible for the installation and operation of the

thermal IP camera VOT-320. International, national and any regional electrical engineering

regulations must be followed at all times. Relevant knowledge of network technology is

required. The manual describes the installation and operation of the camera.

1.2 Conventions in this manual

In this manual, the following symbols and notations are used to draw attention to special

situations:

1.3 Intended use

The thermal IP camera VOT-320 transfers video and control signals over data networks

(Ethernet LAN, Internet). There are various memory options for recording the captured

images. The camea is intended for use with CCTV systems. Various functions can be triggered

automatically by incorporating external alarm sensors. Other applications are not permitted.

In the event of questions concerning the use of the unit which are not answered in this

manual, please contact your sales partner or:

Bosch Sicherheitssysteme GmbH

Werner-von-Siemens-Ring 10

85630 Grasbrunn

Germany

www.boschsecurity.com

CAUTION!

This symbol indicates that failure to follow the safety instructions described may endanger

persons and cause damage to the unit or other equipment.

It is associated with immediate, direct hazards.

NOTICE!

This symbol refers to features and indicates tips and information for easier, more convenient

use of the unit.

VOT-320 Preface | en 7

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09

1.4 EU Directives

The thermal IP camera VOT-320 complies with the requirements of EU Directives 89/336

(Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).

1.5 Rating plate

For exact identification, the model name and serial number are inscribed on the back of the

housing. Please make a note of this information before installation, if necessary, so as to have

it to hand in case of questions or when ordering spare parts.

8en | Safety information VOT-320

DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

2 Safety information

2.1 Electric shock hazard

– Never attempt to connect the camera to any power network other than the type for which

it is intended.

– Use only SELV power supply units with UL approval.

– Never open the cover of the camera module.

– Never open the housing of the power supply unit.

– If a fault occurs, disconnect the power supply unit from the power supply and from all

other units.

– Install the power supply only in a dry, weather-protected location.

– If safe operation of the camera cannot be ensured, remove it from service and secure it to

prevent unauthorized operation. In such cases, have the unit checked by Bosch Security

Systems.

Safe operation is no longer possible in the following cases:

– if there is visible damage to the unit or power cables,

– if the unit no longer operates correctly,

– if internal components have been exposed to rain or moisture,

– if foreign bodies have penetrated the unit,

– after long storage under adverse conditions, or

– after exposure to extreme stress in transit.

2.2 Installation and operation

– The relevant electrical engineering regulations and guidelines must be complied with at

all times during installation.

– Relevant knowledge of network technology is required to install the camera.

– Before installing or operating the camera, make sure you have read and understood the

documentation for the other equipment connected to it, such as pan/tilts. The

documentation contains important safety instructions and information about permitted

uses.

– Perform only the installation and operation steps described in this manual. Any other

actions may lead to personal injury, damage to property or damage to the equipment.

– Ensure a secure footing whenever working in elevated positions (e.g. on roofs or poles).

Use only safety ladders. If necessary, use a safety harness or railings.

– Use only adequate cabes, e.g. marked “Outdoor Cable” or “Water Resistant” for outdoor

installation. For the US, cables must comply with NATIONAL ELECTRICAL CODE,

NFPA 70.

VOT-320 Safety information | en 9

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09

2.3 Maintenance and repair

– Never open the cover of the camera module inside. The unit does not contain any user-

serviceable parts.

– Never open the housing of the power supply unit. The power supply unit does not contain

any user-serviceable parts.

– Ensure that all maintenance or repair work is carried out only by qualified personnel

(electrical engineers or network technology specialists).

CAUTION!

If the camera is mounted to a pan/tilt, ensure that your hands do not get caught or crushed

between camera and pan/tilt.

10 en | Product description VOT-320

DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

3 Product description

3.1 Parts included

– VOT-320 thermal IP camera

– 1 pre-installed IVA Intelligent Video Analysis

– 5 terminal blocks

– 1 focussing tool (to be used with WFOV lenses)

– 10 screws, 2 washers and 2 lock washers to fasten the housing

– 3 tamper resistant torx screws to lock the latches

– 1 torx wrench

– 4 cable glands

– 3 nuts for cable glands

– 3 plugs for unused cable glands

– 1 shielded RJ45 plug

– 1 Quick Installation Guide

– Product CD with the following content:

– Quick Installation Guide

–Manual

– System Requirements document

– Further documentation on Bosch Security Systems products

– Bosch Video Client

–MPEGActiveXcontrol

– DirectX control

– Sun JVM

– Adobe Acrobat Reader

NOTICE!

Check that the delivery is complete and in perfect condition. Arrange for the unit to be

checked by Bosch Security Systems if you find any damage.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bosch Sicherheitskamera Handbücher

Bosch

Bosch MIC IP fusion 9000i Bedienungsanleitung

Bosch

Bosch FlexiDome NDN-498V03-21P Bedienungsanleitung

Bosch

Bosch LTC 0435 Series Bedienungsanleitung

Bosch

Bosch VG4 Series Gebrauchs- und Pflegehandbuch

Bosch

Bosch LTC 0630 Series Bedienungsanleitung

Bosch

Bosch AUTODOME IP starlight 5000i Bedienungsanleitung

Bosch

Bosch DINION inteox 7100i IR Bedienungsanleitung

Bosch

Bosch WZ18NV312-0 Bedienungsanleitung

Bosch

Bosch FlexiDomeXF VDC-485V03-10 Bedienungsanleitung

Bosch

Bosch Dinion XF LTC 0620/11 Installationsanleitung

Bosch

Bosch VDN-5085 Bedienungsanleitung

Bosch

Bosch REG-X Bedienungsanleitung

Bosch

Bosch AUTODOME IP 4000i Bedienungsanleitung

Bosch

Bosch DINION HD 1080p HDR Bedienungsanleitung

Bosch

Bosch Autodome Inteox 7000i-2MP Bedienungsanleitung

Bosch

Bosch AN traffic 4000 IR Bedienungsanleitung

Bosch

Bosch VG4-161-EC00P Bedienungsanleitung

Bosch

Bosch MicroDome NDC-274-P Bedienungsanleitung

Bosch

Bosch FlexiDomeXT LTC 1361/10 Bedienungsanleitung

Bosch

Bosch SVI-1609-5 Montageanleitung

Bosch

Bosch FLEXIDOME HD VR Gebrauchsanweisung

Bosch

Bosch use IP FLEXIDOME IP starlight 6000 VR Bedienungsanleitung

Bosch

Bosch EX52C7V0922-N Bedienungsanleitung

Bosch

Bosch WZ18NV312-0 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung