Bosch FERION 5000 OW Bedienungsanleitung

Wireless Smoke Alarm

FERION 5000 OW

Table of contents

1Graphics 4

2Introduction 6

3Mounting 7

4Radio Network 9

5Maintenance 12

6Technical data 14

7Customer Service 16

Wireless Smoke Alarm Table of Contents | en 3

Bosch Sicherheitssysteme GmbH 08.15 | 2.1 | F.01U.309.850

1 Graphics

(1) minimum

additional

unsuitable

R repeater ON

>20°

(2.A) (2.B) (2.C) (2.D)

>20°

>1m 1m

>20°

0.5-1m

0.5m

0-20°

4en | Graphics Wireless Smoke Alarm

08.15 | 2.1 | F.01U.309.850 Bosch Sicherheitssysteme GmbH

60 mm

(5)

(3) 1 x 3 mm

2 x 3 mm

(4)

< 2 s

(6)

(7)

Wireless Smoke Alarm Graphics | en 5

Bosch Sicherheitssysteme GmbH 08.15 | 2.1 | F.01U.309.850

2 Introduction

The FERION 5000 OW wireless smoke alarm device with built‑in

long-life battery, built‑in siren (4.1), alarm LED (4.2), emergency

light (4.3) and big button for operation (4.4) is solely designed

for residential applications. The device reliably warns you of the

emergence of a fire in your house or flat. If the smoke emissions

exceed a certain limit, an alarm is raised. More information, CE

declaration, and declaration of performance is available on

www.boschsecurity.com/ferion/.

The safety notes and instructions contained in this manual must

be observed in order to ensure proper function. The device must

not be modified in any way. If you have any questions about the

method of operation, safety or connection of the device, consult

the place of purchase.

Caution!

Only use original parts. Only use installation materials

as recommended in this manual. Do not paint over the

device! Do not cover it with wallpaper! Replacement

after 10 years recommended.

6en | Graphics Wireless Smoke Alarm

08.15 | 2.1 | F.01U.309.850 Bosch Sicherheitssysteme GmbH

Notice!

Do not use if there are signs of damage, or in case of

malfunction. Return defective devices to the place of

purchase.

Not suitable for household room illumination!

Old devices are not to be disposed of with the

household waste. Dispose of them according to the

guidelines for electric and electronic waste at the

local collection points.

Parts included

1 smoke alarm device: base (3.A) and detector head (3.B)

Fastening material: 1 screw, 1 plug

3 Mounting

Notice!

The device is designed for mounting according to DIN

14676 on flat or slanted ceiling. Wall mounting is not

allowed.

Perform the following steps. Find exact information about the

single steps on the following pages in this manual. See also the

graphics at the beginning of this manual.

1. Determination of the mounting locations. (1) Observe the

information regarding Unsuitable locations for mounting, page

8, and regarding Audibility, page 8. Each device is to be

Wireless Smoke Alarm Graphics | en 7

Bosch Sicherheitssysteme GmbH 08.15 | 2.1 | F.01U.309.850

mounted horizontally on the ceiling in centered position with

a minimum distance of 0.5m to walls and objects. On slanted

ceilings >20° it is to be mounted 0.5m to 1m from the top of

the ceiling. (2.A), (2.B), (2.C), (2.D)

2. Connecting devices, page 10. For testing the network,

position the devices near to the determined mounting

locations: Testing the network, page 10. If necessary switch

the repeater function on for one device, see Repeater

function, page 11.

3. For each device: Mounting the base. (5) Observe the mark

(5.2) for adjusting the emergency light and the marks (5.1)

for alignment with BOSCH label/siren.

4. Functional check, page 12, for each device after setting it up

into operation. (6) (7)

Unsuitable locations for mounting

– Kitchen/bathroom (steam)

– Rooms with open fireplaces (fumes)

– In the immediate vicinity of halogen lamps, transformers,

fluorescent or energy-saving lamps

– Garages (exhaust fumes)

– Dusty and dirty rooms

– In the vicinity of windows, ventilators (air movement)

– In the vicinity of areas where people smoke

Audibility

You must hear an alarm at any place in your building or flat. The

alarm really has to wake you up. If necessary adapt the number of

the devices for achieving audibility in your whole building or flat.

8en | Graphics Wireless Smoke Alarm

08.15 | 2.1 | F.01U.309.850 Bosch Sicherheitssysteme GmbH

Mounting the base

Mount the base with one central screw and plug. (5.A) Or

optionally use two screws and plugs. (5.B) To set the device into

operation you screw the detector head to its base by twisting it

clockwise until it latches. (6)

4 Radio Network

Up to 40 FERION 5000 OW can be interconnected to create a

network. Thus, an alarm is raised at all devices giving the chance

to react faster to a distant fire. Before mounting to the ceiling,

position the devices you want to connect next to each other.

Leave a minimum distance of 1 m in between.

Notice!

FERION 5000 OW is not compatible with FERION 3000

OW. Both types cannot be integrated in one network.

Notice!

Hereby, Bosch Sicherheitssysteme GmbH declares that

the radio equipment type FERION 5000 OW is in

compliance with Directive 1999/5/EC and is designed

for the use in all countries of the European Union. The

full text of the EU declaration of conformity is available

at the following internet address:

www.boschsecurity.com/ferion/

Wireless Smoke Alarm Graphics | en 9

Bosch Sicherheitssysteme GmbH 08.15 | 2.1 | F.01U.309.850

Attentively read the following instructions before programming.

Connecting devices

If the device which you want to connect was not in use before

proceed with step 1. If the device which you want to connect was

already in use, disassemble head and base. Then press and hold

the button for about 4 s to clear for installation. If it was already

element of a network, then reset it first, see Disconnecting a

device (Reset), page 12.

1. Both devices must be in operation (head and base

assembled) and in normal mode (no optical signal).

2. For both devices, press and hold the button for about 4 s

until both devices flash orange (connecting). -> After a short

delay the devices light up green (connecting successful) or

red (connecting failed).

To connect a further device, repeat the procedure for one device

of the existing network and the unprogrammed device. (Up to 40

devices can be interconnected.)

Once you have connected all devices and the devices are in

normal mode again (no optical signal), test the network.

Testing the network

In addition to the Functional check, page 12 (7), for each device,

test the network:

1. Select the device that has to cover the longest distance to

connected devices. To send a radio test signal, press and

hold the button for about 4 s until the LED flashes orange

(connecting).

2. Press and release the button (< 2 s).

10 en | Graphics Wireless Smoke Alarm

08.15 | 2.1 | F.01U.309.850 Bosch Sicherheitssysteme GmbH

Andere Handbücher für FERION 5000 OW

Inhaltsverzeichnis

Andere Bosch Rauchmelder Handbücher

Bosch

Bosch MAGIC.SENS series Bedienungsanleitung

Bosch

Bosch FAA-350-B6 Bedienungsanleitung

Bosch

Bosch FCS-320-TP Series Bedienungsanleitung

Bosch

Bosch D1255RB/D1256RB/D1257RB Bedienungsanleitung

Bosch

Bosch FMM‑325A Series Bedienungsanleitung

Bosch

Bosch FAD?420?HS?EN Bedienungsanleitung

Bosch

Bosch FERION 1000 O Bedienungsanleitung

Bosch

Bosch FERION 1000 O Bedienungsanleitung

Bosch

Bosch FAS-420-TT Series Bedienungsanleitung

Bosch

Bosch FCS-320-TM Bedienungsanleitung

Bosch

Bosch Fireray 50RV Bedienungsanleitung

Bosch

Bosch FMM-100 Series Bedienungsanleitung

Bosch

Bosch D326A Anwendungshandbuch

Bosch

Bosch twinguard Bedienungsanleitung

Bosch

Bosch NOM 100 LSN Bedienungsanleitung

Bosch

Bosch D323A Handbuch

Bosch

Bosch Fireray 50 Bedienungsanleitung

Bosch

Bosch FERION 4000 O Bedienungsanleitung

Bosch

Bosch F220 Bedienungsanleitung

Bosch

Bosch FAS-420-TM Bedienungsanleitung

Bosch

Bosch D341 Bedienungsanleitung

Bosch

Bosch FAD-325-V2F Bedienungsanleitung

Bosch

Bosch FCS-320-TP2 Installationshandbuch

Bosch

Bosch F220 Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung