Boss Audio Systems 640CA Bedienungsanleitung

640CA

OWNER’S MANUAL

Mobile Audio System

yPLL Synthesizer Stereo Radio

yCD/WMA Player

yAutomatic Memory Storing

yFull Detachable Panel

yPreset Equalization

yElectronic Shockproof (ESP) Function

yAuxiliary Input Function

yRemote Control

CONTENTS

Installation...........................................3

Take out screw before installation.........3

DIN Front-Mount (Method A).................3

Installing the unit ...............................3

Removing the unit .............................4

DIN Rear-Mount (Method B).................5

Using the detachable front panel ......6

Wiring Connection..............................7

Operation.............................................8

Location of keys....................................8

Switching on/off the unit........................9

Faceplate release .................................9

Sound adjustment.................................9

System setting......................................9

Loudness..............................................9

Set the clock.........................................9

Display information...............................9

Equalization..........................................9

Liquid crystal display.............................9

Remote sensor .....................................9

ESP function.........................................9

Auxiliary input .......................................9

Reset function.......................................9

Radio operation ....................................10

Switching to radio mode....................10

Selecting the frequency band............10

Selecting station................................10

Automatic memory storing&

program scanning .............................10

Station storing ...................................10

Mono/Stereo......................................10

CD/WMA operation...............................10

Switching to CD mode.......................10

Selecting tracks.................................10

Pausing playing.................................10

Previewing tracks..............................11

Repeating tracks...............................11

Playing tracks in random...................11

Ejecting a disc...................................11

Special function for WMA disc...........11

Disc notes.............................................12

Remote control....................................13

Specification........................................14

Trouble shooting.................................15

Basic operation.....................................9

INSTALLATION

Notes:

yChoose the mounting location where

the unit will not interfere with the normal

driving function of the driver.

yBefore finally installing the unit, connect

the wiring temporarily and make sure it

is all connected up properly and the

unit and the system work properly.

yUse only the parts included with the

unit to ensure proper installation. The

use of unauthorized parts can cause

malfunctions.

yConsult with your nearest dealer if

installation requires the drilling of holes

or other modifications of the vehicle.

yInstall the unit where it does not get in

the driver’s way and cannot injure the

passenger if there is a sudden stop, like

an emergency stop.

yIf installation angel exceeds 30° from

horizontal, the unit might not give its

optimum performance.

yAvoid installing the unit where it would

be subject to high temperature, such as

from direct sunlight, or hot air, from the

heater, or where it would be subject to

dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit be can properly installed either

from “Front” (conventional DIN Front-mount)

or “Rear”(DIN Rear-mount installation,

utilizing threaded screw holes at the sides

of the unit chassis). For details, refer to the

following illustrated installation methods.

TAKEOUT SCREW BEFOREINSTALLATION

Before install the unit, please remove the

two screws.

DIN FRONT-MOUNT (Method A)

Installation Opening

This unit can be installed in any dashboard

having an opening as shown below:

Installing the unit

Be sure you test all connections first, and

then follow these steps to install the unit.

1. Make sure the ignition is turned off, and

then disconnect the cable from the

vehicle battery’s negative (-) terminal.

2. Disconnect the wire harness and the

antenna.

3. Press the release button on the front

panel and remove the control panel

(see the steps of “removing the front

panel”).

4. Lift the top of the outer trim ring then pull

it out to remove it.

5. The two supplied keys release tabs

inside the unit’s sleeve so you can

remove it. Insert the keys as far as they

will go (with the notches facing up) into

the appropriate slots at the middle left

and right sides of the unit. Then slide

the sleeve off the back of the unit.

Take out screw

before installation.

INSTALLATION

(1) Front panel; (2) Outer trim ring;

(3) Sleeve; (4) L key; (5) R key

6. Mount the sleeve by inserting it into the

opening of the dashboard and bend

open the tabs located around the sleeve

with a screwdriver. Not all tabs will be

able to make contact, so examine which

ones will be most effective. Bending

open the appropriate tabs behind the

dashboard to secure the sleeve in

place.

(1) Dashboard (2) Taps

7. Reconnect the wire harness and the

antenna and be careful not to pinch any

wires or cables.

8. Slide the unit into the sleeve until it

locks into place.

9. To further secure the unit, use the

supplied metal strap to secure the back

of the unit in place. Use the supplied

hardware (Hex Nut (M5mm) and Spring

Washer) to attach one end of the strap

to the mounting bolt on the back of the

unit. If necessary, bend the metal strap

to fit your vehicle’s mounting area. Then

use the supplied hardware (Tapping

Screw and Plain Washer) to attach the

other end of metal strap to a solid metal

part of the vehicle under the dashboard.

This strap also helps ensure proper

electrical grounding of the unit.

Note to install the short threading terminal

of the mounting bolt to the back of the unit

and the other long threading terminal to

the dashboard.

(1) Metal Strap; (2) Mounting Bolt;

(3) Hex Nut; (4) Spring Washer;

(5) Tapping Screw; (6) Plain Washer

10. Reconnect the cable to the vehicle

battery’s negative (-) terminal. Then

replace the outer trim ring and install the

unit’s front panel (see the steps of

“Installing the front panel”).

Removing the unit

1.Make sure the ignition is turned off, then

disconnect the cable from the vehicle

battery’s negative (-) terminal.

2.Remove the metal strap attached the

back of the unit (if attached).

3.Press the release button to remove the

front panel.

4.Lift the top of the outer trim ring then pull

it out to remove it.

INSTALLATION

5.Insert both of the supplied keys into the

slots at the middle left and right sides of

the unit, then pull the unit out of the

dashboard.

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota, follow

these mounting instructions.

Use the screw holes marked T (Toyota), N

(Nissan) located on both sides of the unit to

fasten the unit to the factory radio mounting

brackets supplied with your vehicle.

Dashboard or Console

Screw

Factory Radio

Mounting Bracket

Side View showing

Screw Holes marked

T, N

Screw

To fasten the unit to the factory radio

mounting brackets.

Align the screw holes on the bracket with

the screw holes on the unit, and then

tighten the screws (5x5mm) on each side.

Note: The outer trim ring, sleeve and the

metal strap are not used for method B

installation.

REMOVING THE FRONT PANEL

1.Press the release button on the front

panel and pull off the front panel.

2.Keep front panel into the case.

INSTALLING THE FRONT PANEL

To install the front panel, insert the panel

into the housing and make sure the panel

is properly installed. Otherwise,

abnormality occurs on the display or some

keys will not function properly.

Precautions when handing

1. Do not drop the front panel.

Precautions when handling

1. Do not drop the front panel.

2. Do not put pressure on the display or

control buttons when detaching or

re-installing the front panel.

3. Do not touch the contacts on the front

panel or on the main unit body. It may

result in poor electrical contact.

4. If any dirt or foreign substances

adhered on the contacts, they can be

removed with a clean and dry cloth.

5. Do not expose the front panel to high

temperatures or direct sunlight in

anywhere.

6. Keep away any volatile agents (e.g.

benzene, thinner, or insecticides) from

touching the surface of the front panel

7. Do not attempt to disassemble the front

panel.

USING THE DETACHABLE FRONT PANEL

WIRING CONNECTION

FOR 50X4W SYSTEM

OPERATION

LOCATION OF KEYS

1. release button

2. (tune/seek/track up)

3. Volume knob (when rotated)

SEL button (when pressed)

4. Disc slot

5. 1 PAU button

6. 2 SCN button

7. 1-6 preset buttons

8. 3 RPT button

9. MON button

10. AS/PS/Navi-SCH button

11. MOD button

12. Eject button

13. Liquid crystal display

14. BND/LOU/ENT button

15. (tune/seek/track down)

16. 4 SHF button

17. Auxiliary input jack

18. 5 DIR- button

19. 6 DIR+ button

20. EQ button

21. Remote Sensor

22. DISP button

23. PWR/MUT button

24. Reset button

OPERATION

SWITCHING ON/OFF THE UNIT

Press PWR/MUT button (23) to switch on

the unit. When system is on, press and

hold PWR/MUT button (23) to turn off the

unit.

FACEPLATE RELEASE

Press button (1) to detach the

removable faceplate.

SOUND ADJUSTMENT

Press the volume button (3) shortly to

select the desired adjustment mode. The

adjustment mode will change in the

following order:

VOL BAS TRB BAL FAD

(Volume) (Bass) (Treble) (Balance) (Fader)

By rotating the volume knob(3)clockwiseor

counter-clockwise, it is possible to adjust the

desired sound quality.

SYSTEM SETTING

Press and hold the volume button (3) on

the front panel to enter system setting

mode. Then shortly press the volume

button (3) to select the item you want to

change and rotate the volume knob (3) to

change the corresponding setting.

1) BEEP ON/OFF

Use the volume knob (3) to set Beep

sound ON or OFF.

2) AREA OIR/EUR/USA/ASI/S-R/JPN

In radio mode, Use the volume knob

(3) to set the different area frequency

spacing.

3) DIM HIGH/LOW/MID

In this menu, rotate the volume knob (3)

to change the brightness of the backlight

among High, Low and Middle.

LOUDNESS

Press BND/LOU/ENT button (14) for

several seconds to reinforce the bass

output. Press it for several seconds again

to release this function.

SET THE CLOCK

Press the DISP button (22) until the clock

is shown on the display. Then hold the

button until the clock flashes. Then press

button (2) to change the minutes and

button (15) to change the hours.

DISPLAY INFORMATION

Press DISP button (22) to operate as the

conversion of each display mode.

EQUALIZATION

Press EQ button (20) to turn on

equalization function and to select desired

audio mode. There are five kinds of mode

as below:

ĺFLATĺCLASSICSĺPOP MĺROCK MĺDSP OFF

MUTE

Press PWR/MUT button (23) shortly to

mute down the sound instantly. Press it

again to resume the sound.

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated

functions on the display (13).

REMOTE SENSOR

Point the remote control handset to the

remote sensor (21). Press the function

keys on the handset to control the system.

ESP FUNCTION

The unit can be shockproof about ten

seconds.

AUXILIARY INPUT

The unit can be connected to a portable

audio player through the auxiliary input jack

(17) on the front panel. After finishing the

connection, you can press MOD button

(11) on the front panel to switch the mode

to AUX IN mode.

RESET FUNCTION

Reset button (24) must be activated with

either a ballpoint pen or thin metal object.

BASIC OPERATION

Inhaltsverzeichnis

Andere Boss Audio Systems Autoempfänger Handbücher

Boss Audio Systems

Boss Audio Systems BV90BA Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV7348B Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 637UA Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 630UASB Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV6500 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV9979B Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV8728B Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 754DI Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems MR1400W Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 614CA Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV9979B Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV9976B Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV7942 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV9978T Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems CD-3155R Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems C-3040 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems MR2180UA Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 506CA Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 835UI Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems BV8974B Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems CD-3020 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems MR1525UI Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems 630UA Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems CD-3190R Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

JVC

JVC KD-AHD69 Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung