Boytone BT-101B Bedienungsanleitung

Suitcase Turntable with Rechargeable Battery

USB/SD and FM Radio & Bluetooth

Model Numbers:

BT-101B

INSTRUCTION MANUAL

READ INSTRUCTIONS CAREFULLY BEFORE USE AND STORE

IN A SAFE PLACE FOR FUTURE REFERENCE

Features:

1. Function 33.3,45,45rpm Turntable LP player

2. Built-in Speaker (2x1W RMS)

3. Line Out ( RCA Jack )

4. USB/SD playing and recording

5. FM radio

6. Aux in and Headphone

7. RCA out

8. Can built-in rechargeable lithium battery

(Can be run continuously 3~4 hours)

9. The external power supply (USB Jack 5V 500ma )

DESCRIPTION

1. Lock catch

2. Plastic dust cover

3. Adapter - Use this when playing 45rpm records with cut out centres.

4. Tone arm lift lever

5. Turntable

6. Auto stop control

7. Speed selection - Three speed for choice: 33.3, 45, 78 rpm.

8. Llock ON and OFF

9. Needle

10. Power switch

11. Built-in stereo speaker

12. Handle

13. RCA output

14. USB 5V DC power in socket

15. Socket for headphone to play iPhone/iPod

16. LCD blue display

17. SKIP UP button

18. SKIP DOWN button

19. Mode: to select FM radio/USB/SD/Bluetooth(Bluetooth Must be paired) or LP

songs

20. PLAY OR PAUSE

21. Stop/Play button

22. Aux in

23. SD card slot: playing SD card songs or recording

24. REC: function to record

25. USB slot: playing USB songs or recording

26. Delete button

INITIAL SET-UP

MAIN CONNECTION

Ensure that the mains voltage of your home corresponds to the operating

voltage of the unit. Your unit is ready to be connected to a mains voltage of

100-240V/50／60Hz.

Bluetooth Connection

Put on Bluetooth mode (#19) then paired with your device

AMPLIFIER CONNECTION (if required)

Whilst you can listen to your new turntable using the built in speakers you may

wish to connect it to your existing Hi Fi system. Connect the audio plugs to the

AUX input on your mixer or amplifier using an RCA cable (not supplied)

Red plug into R/H channel input.

White plug into L/H channel input.

BOYTONE 101B

*The first time this Record Player is used, plug it in to charge battery for at least 30

minutes. -

Playing a Record

1. Remove Protective Stylus Cap.

2. Choose desired playing speed using Speed Selection Switch.

3. Put Auto-Stop Switch in the ON position if you want Turntable to stop when Tone

arm gets to the end.

4. Place record on Turntable.

5. Turn on Rotary Power Switch. This is also Volume Control.

6. Release Tone arm Lock.

7. Use your right hand to use Tone arm Lift Lever to raise Tone arm.

8. While holding up Tone arm Lift Lever with your right hand, use your left hand to

move Tone arm into place over record. Record should begin to spin.(If Record

Player makes a popping sound, it needs to charge longer.)

*Clean records sound better and are easier on Stylus (needle). Use a proper record

cleaner.

Phono encoding

1. Set the function button to PHONO mode and then insert a memory device

(USB drive, SD or MMC card).

2. Put your record onto the turntable and get it ready for playback.

3. Press the record REC button. It will take about 3 - 4 seconds to read the

memory device, then the USB or SD icon will be flashing on the LC display.

4. Press the skip up or skip down button to select the desired mode (USB or SD)

for encoding, then press the record REC button again to confirm.(You can skip

this step if only a USB drive or an SD/MMC card is inserted.)

5. The system will start the encoding mode after a few seconds.

6. Lower the tone arm to start playback of the record. During encoding, the USB

or SD icon will be flashing on the display.

7. To finish encoding, press the stop button. The display will show “END” and

return to PHONO mode.

NOTE:

• The recording speed is 1:1. Recording will take as long as playing the record.

• The recording format is pre-set at MP3 bit rate 128 kbps.

AUX IN encoding

1. Insert AUX in and then insert a memory device (USB drive, SD or MMC card).

2. Press the record REC button, it will take 3 - 4 seconds to read the memory

device, then the USB or SD icon will be flashing on the LC display.

3. Press the skip up or skip down button to select the desired mode (USB or SD)

for encoding, then press the record REC button again to confirm.(You can skip

this step if only a USB drive or an SD/MMC card is inserted.)

4. The system will start the encoding mode after a few seconds. During encoding,

the USB or SD icon will be flashing on the display.

5. To finish encoding, press the stop button. The display will show “END” and

return to TAPE/AUX mode.

NOTE:

• The recording speed is 1:1. Recording will take as long as playing the CD (or

other auxiliary input).

• The recording format is pre-set at MP3 bit rate 128 kbps.

The USB Port and SD Card Slot

Playback of music in MP3/WMA format via USB device or memory card

The system is able to decode and playback all MP3/WMA files stored in the

memory media connected to the USB port or SD/MMC card slot.

1. Turn the volume knob clockwise to turn the equipment on.

2. Following the illustration below, insert a USB device face up into the USB port,

making sure it is fully inserted. Alternatively, insert a memory card in the direction

of the arrow (as shown on the label next to the memory card slot), making sure to

insert it straight without bending. IMPORTANT: Connecting the USB device

upside down or backwards could damage the audio system or storage media

(USB drive, SD or MMC card). Check to ensure the direction is correct before

connection.

3. Set the function selector to USB/SD mode. (If you have both a USB device and

a memory card inserted, press the MODE button to toggle between USB and

SD mode.) The system will start reading the storage medium automatically

after mode selection and will display the total number of folders and MP3/WMA

files.

4. The system will then start audio playback from the media storage device (USB

or SD card) automatically.

Playback controls

PLAY/PAUSE Press this button once to stop playing, press it again to continue.

STOP Press this button to stop audio playback, the display will then show the

total number of MP3/WMA files.

SKIP UP Press this button once to play the next file, press and hold this button to

fast forward through the files/tracks.

SKIP DOWN Press this button once to play the previous file, press and hold this

button to fast reverse through the files/tracks.

TUNING KNOB Turn this knob to the right/left to search a folder backward or

forward.

MODE Press this button to toggle between USB and SD Card mode.

Important notes

• The system can detect and read files in MP3 / WMA format only via the USB

port or SD card slot.

• You can connect an MP3 player to the system via the USB socket, however,

some MP3 players may not be able to play via the USB socket. This is due to

variances in the MP3 encoding format, it is not a malfunction of the system.

• There are numerous USB and SD device producers and their products vary in

solution and format. We therefore cannot guarantee that this unit will support all

USB and SD devices from every brand.

• This system supports SD cards up to 8GB.

• MP3 / WMA track format requirements: MP3 bit rate: 32 kbps~256 kbps; WMA

bit rate: 32 kbps ~ 320 kbps.

Copying of MP3 / WMA files

The system allows you to copy files from USB to SD/MMC or vice versa. You can

copy a single file/track, a folder of files/tracks, or all files/tracks on the storage

medium.

Copying a single file/track

1. Insert a USB storage device and SD/MMC card, then select USB/SD mode (as

described previously).

2. Press the record REC button during playback of the track you want to copy:

“ONE” will be flashing on the display. Press the record REC button again to

confirm.

3. The USB or SD icon will be flashing on the display while the system is copying

the file.

4. Once the file has been copied, the unit will stop playback automatically. “END”

will be shown on the display and the system will revert to USB or SD mode.

Copying a folder

1. Insert a USB storage device and SD card, then select USB/SD mode (as

described previously). When the system has recognised the device, press the

stop button.

2. Turn the tuning knob to select the desired folder for copying.

3. Press the record REC button: “ONE” will be flashing on the display. Press the

SKIP UP or SKIP DOWN button to select “FOL” (folder) on the display. Press

the record REC button again to confirm.

4. The USB or SD icon will be flashing on the display while the system is copying

the folder.

5. When the folder has been copied, the USB or SD icon will stop flashing on the

display.

Copying all files/tracks

1. Insert a USB storage device and SD card, then select USB/SD mode (as

described previously). When the system has recognised the device, press the

stop button.

2. Press the record REC button: “ONE” will be flashing on the display. Press the

SKIP UP or SKIP DOWN button to select “ALL” on the display. Press the record

REC button again to confirm.

3. The USB or SD icon will be flashing on the display while the system is copying

the files/tracks.

4. When all files/tracks have been copied, the USB or SD icon will stop flashing

on the display.

NOTE: If you press the record REC button during playback in USB or SD mode,

the file will copy from USB to SD or vice versa.

Deleting files from the USB device / SD card

The system is able to erase files stored on the USB drive or SD card. You can

delete a single file/track, a folder of files/tracks, or all files/tracks on the storage

medium.

Deleting a single file/track

1. Insert the USB storage device or SD card, then select USB/SD mode (as

described previously).

2. Press the delete DEL button during the playback of the track you want to

delete: “ONE” will be flashing on the display. Press the delete DEL button again

to confirm.

3. “DEL” will show on the display while the file/track is being deleted until the

deletion is complete.

Deleting a folder

1. Insert a USB storage device and SD card, then select USB/SD mode (as

described previously). When the system has recognised the device, press the

stop button.

2. Turn the tuning knob to select the desired folder for deleting.

3. Press the delete DEL button: “ONE” will be flashing on the display. Press the

SKIP UP or SKIP DOWN button to select “DIR” (directory) on the display. Press

the delete DEL button again to confirm.

4. “DEL” will show on the display while the folder is being deleted until the

deletion is complete.

Deleting all files/tracks

1. Insert a USB storage device and SD card, then select USB/SD mode (as

Inhaltsverzeichnis

Andere boytone Drehscheibe Handbücher

boytone

boytone BT-13B Bedienungsanleitung

boytone

boytone BT-19DJB Bedienungsanleitung

boytone

boytone BT-38SM Bedienungsanleitung

boytone

boytone TR-19PCD Bedienungsanleitung

boytone

boytone BT-17DJS Bedienungsanleitung

boytone

boytone BT-17TB Bedienungsanleitung

boytone

boytone BT-22-B Bedienungsanleitung

boytone

boytone BT28SPB Bedienungsanleitung

boytone

boytone BT-37M-C Bedienungsanleitung

boytone

boytone BT-19DJM Bedienungsanleitung

boytone

boytone BT-16DJB-C Bedienungsanleitung

boytone

boytone BT-25CB Bedienungsanleitung

boytone

boytone BT-17DJM Bedienungsanleitung

boytone

boytone BT-24DJB Bedienungsanleitung

boytone

boytone BT-25MB Bedienungsanleitung

boytone

boytone BT-11B Bedienungsanleitung

boytone

boytone BT29B Bedienungsanleitung

boytone

boytone TR-18CD Bedienungsanleitung

boytone

boytone BT-21DJB-C Bedienungsanleitung

boytone

boytone BT-37WT-C Bedienungsanleitung

boytone

boytone BT-27G-C Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

boytone BT-101B Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken