BPC Airflow DV145 Adroit Bedienungsanleitung

Instruction Manual

80000484 - Issue 1 04/16

Valid from 01/05/16

DV145 Adroit

90000580

90000580EPH

90000581

90000581EPH

DV110 Adroit

90000578

90000578EPH

90000579

90000579EPH

DV96 Adroit

90000576

90000576EPH

90000577

90000577EPH

1. INTRODUCTION

• The main parts of the ventilation unit

• System description

• General safety Instructions, guarantee and liability

• Control panel buttons

• Starting up and shutting down the unit

2. DEPLOYMENT WIZARD

• Basic settings (setting the language, time and date)

• Expert settings (setting the password and access rights,

parental controls, fan settings, profile settings)

3. USING THE UNIT

• Ventilation profiles

• Temperatures and Sensors

• Settings (filter, display settings, time and date, week clock, switching the

unit off)

4. MAINTENANCE

• Filters

• Heat recovery cell

• Fans

• Condensing water

• Troubleshooting

5. TECHNICAL SPECIFICATIONS

• Technical data, supply/extract air volumes, fan curves, sound values,

main components, measurement points, dimensions and duct outlets

• Internal electrical connection

• External electrical connection

• Heating/cooling radiator operation chart

6. MOUNTING

• Wall mounting

• Measuring tubes

• Ceiling mounting

• Floor mounting

• Condensing water

7. CERTIFICATE OF CONFORMITY

8. EXPLODED VIEW AND PARTS LIST

9. USER LEVEL DIAGRAMS

CONTENTS

10..COMMISSIONING THE SYSTEM

11..WARRANTY

INTRODUCTION

SYSTEM DESCRIPTION

DIFFERENCES BETWEEN THE UNITS

•Power

•Size

•DV96 can be equipped with an optional electric post heater.

DV110 and DV145 can be equipped with either one or two

optional electric post heaters.

•Weight

•In the model DV96, there is a sealing tape at the bottom of the

heat recovery cell. In other models, there is a separate sealing

bar under the heat recovery cell.

•Standard delivery options vary from country to country.

•The available options vary from country to country.

Mounting options:

•Models DV96 and DV110 can be mounted either on the wall,

or on the ceiling by using the optional mounting plate. These

models can also be mounted on the floor via a installer

prepared stand.

•Model DV145 can be mounted either on the wall, or on the

floor by using a floor rack (optional). This model cannot be

mounted on the ceiling.

GENERAL SAFETY INSTRUCTIONS

For safe and proper handling, it is necessary to know the basic

safety regulations and the intended usage of the ventilation

system. Read this manual before operating the ventilation unit.

Keep this manual for later use. In case of loss, you can download

the manual from our website.

This user manual contains all important tips for operating the

system safely. This user manual must be observed by all

persons who operate and maintain the ventilation system.

Furthermore, observe all local accident prevention regulations.

INTENDED USE

All ventilation units are designed to take care of appropriate

and continuous ventilation, in such a way that people and

structures will remain healthy.

GUARANTEE AND LIABILITY

Demands on guarantee and liability are excluded if they

are caused by the following reasons:

•Unintended use of the ventilation system and the control unit

• Improper mounting, initial operation and operation

• Operating the ventilation system with a defective safety

system

• Ignoring advice for transportation, mounting, operation and

maintenance

•Unauthorized structural alteration and changes of the

programming

•Disasters due to extraneous elements and force majeure

INTRODUCTION

Change profile button. This button allows you to change

the ventilation profile of the device.

Profile Information button. This button allows you to view

the currently active profile information.

Temperature button. Pressing this button displays

information on temperatures and sensors.

Settings button. Press this button to open the settings.

Back button. Pressing this button takes you backwards in

the menu.

Left arrow button. Pressing this button takes you to the

left in the menu.

Right arrow button. Pressing this button takes you to the

right in the menu.

OK button. Press this button to accept the selected

option.

Select button. Press this button to select an option from

the list.

Edit button. Press this button to edit settings.

Plus button. Press this button to:

•Increase the value of the setting.

•Move to the next menu item.

•Move from a one-day view to a week view in the

temperature, humidity and carbon dioxide graphs.

Minus button. Press this button to:

•Reduce the value of the setting.

•Return to the previous menu item.

•Move from a week view to a one-day view in the

temperature, humidity and carbon dioxide graphs.

Up arrow button. Pressing this button takes you upwards

in the menu.

Down arrow button. Pressing this button takes you

downwards in the menu.

Statistics button. This button opens the temperature,

humidity and carbon dioxide graphs (1 day / week).

These icons indicate the settings hierarchy level.

This icon indicates that the feature is disabled at your user

level. The parental controls lock code is 1001.

BUTTON DESCRIPTION

INSTALLATION

Installation and setup should only be carried out by qualified

experts. Electrical installations and connections must only be

carried out by electricians, and according to the local regulations.

CONTROL PANEL BUTTONS

INTRODUCTION

Ventilation has to be constant for the indoor air to stay healthy for

the dwellers and the structures of the dwelling. Even for longer

holidays, it is not advisable to stop the ventilation, because the

indoor air will become stuffy and, during the heating season, the

indoor air humidity may condense in the ventilation ductwork and

structures, causing moisture damage.

You can control and automate the ventilation unit operation in the

following ways:

•By using a control panel installed in the building

•Through the Home local network connection and the Web

interface

• Through the Adroit Cloud Service and the Web interface

• Through a remote monitoring service or building automation

by using voltage signals or Modbus messages

The required ventilation may also be adjusted automatically with

the optional carbon dioxide and humidity sensors. In this case,

ventilation remains optimal even if the dwelling is unoccupied.

By using the week clock, you can create just the right ventilation for

your individual lifestyle.

WARNING

The unit is not intended for use by children (under 8 years) or by

persons with reduced sensory, physical, or mental capabilities, or

lack of knowledge and experience, that limit the safe operation of

the unit.

These people can use the product under the supervision of a

person responsible for their safety, or as directed.

TIP

The Adroit Digital Controller panel automatically switches to

sleep mode when the pre-set sleep time has elapsed. If you want

to wake up the Adroit Digital Controller panel, press any button

on the control panel.

The ventilation specialist has made the ventilation system with

basic and expert settings, based on the ventilation plan. The

basic settings are:

If you are satisfied with the basic settings made by the installer,

do not make changes to them.

STARTING THE UNIT

If you are starting the ventilation unit for the first time, or after

any maintenance procedure, when the unit starts up, the

diagnostic display will appear for a few seconds, until the At home

profile main screen is opened.

If the unit is switched off from the control panel, you can start the

ventilation unit by pressing any button on the control panel.

NOTE

The first launch of the unit may take a while, as the control panel

will format its software and verify that it has the latest software

version.

SWITCHING THE UNIT OFF

If you want to switch off the ventilation unit, proceed as follows:

1. Select Settings > Turn unit OFF.

2. Press the OK button.

3. The system asks for confirmation.

4. Press the OK button.

5. The ventilation unit is now switched

off.

INTRODUCTION

•User interface language.

•Time and date.

The expert settings are:

•System administrator password. The installer has given

you the system administrator password.

•Possible parental controls.

•Fan settings.

•User profile settings, such as the temperature.

BASIC SETTINGS

DEPLOYMENT WIZARD

1. Start the ventilation device.

2. Press the OK button.

3. The deployment wizard is launched.

SELECTING THE LANGUAGE

Select the user interface language as follows:

1. Use the arrow buttons to select the language you want, for

example, English:

2. Press the OK button.

3. The selected language is now English.

SET THE TIME

When the deployment wizard prompts you to set the date and

time, the Time and date screen is opened first:

1. Use the Plus and Minus buttons to set the hours.

2. Press the Right arrow button.

3. Use the Plus and Minus buttons to set the minutes.

4. The time is now set.

5. Proceed to the next phase by pressing the Right arrow

button.

SET THE 24 OR 12 HOUR CLOCK

By default, the system uses a 24 hour clock.

If you want to use the 24 hour clock, proceed to the next step by

pressing the Arrow right button.

If you want to use the 12 hour clock, proceed as follows:

1. Press the Minus button. The 24-Hour Time setting value is

changed to Off.

2. Proceed to the next phase by pressing the Right arrow

button.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BPC Lüfter Handbücher

BPC

BPC Vent-Axia VASF100B Montageanleitung

BPC

BPC AIRFLOW DUPLEXVENT DV145SE Betriebsanleitung

BPC

BPC Vent-Axia Integra Montageanleitung

BPC

BPC Vent-Axia Sentinel 405215 Advance S Leitfaden

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung