AHD Waterproof IR
User Manual
Camera
DESCRIPTION
ATTENTION
SPECIFICATION
DIMENSION(MM)
FEATURES
PARTS INSTRUCTION AND INSTALLATION
*Specifications subject to change without notice. EN-A01-831T-20150529
Thank you for your purchasing this product. Before attempting to conn
-ect or operate this product, please read these instructions carefully and
save this manual for future use.
CAUTION
RISK OF ELEC TRI C
SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF E LECTRIC
SHOCK, DO N OT REMO VE COVER
(OR BACK) .
NO USER-SE RVIC EABLE PARTS INSIDE. R EFER
SERVICING TO QUALI FIED SERVICE PE RSONNEL
1.
is DC12V.
2.
3.
4
5.
6.
7.
Use the Appropriate Power Supply
The input power for the camera Be sure to connect it to the
appropriate power. Wrong connection may cause malfunction and/or
damage to the video camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handling or storage.
. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to
remove. Use a mild detergent and wipe gently.
Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightob
-jects that causes mear to appear irrespective of whether the camera is
operating or not. This can damage the sensor.
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless commun
-ication device which emits strong electromagnetic field, some irregula
-rity such as noise on monitor screen may happen.
BLSBVP30/2.0FHD
The waterproof bullet camera adopt 2.0 pixels 1080P@25/30fps
high performance AHD sensor, no compressed, no delay, and realtime
transmission image. IP66 waterproof standard, IR-CUT filter, smart-IR
control. Fashionable and professional design.
Megapixel
★Long-life IR LED design, whose
brightness is several times higher and
service life longer than ordinary LED’s
★2.0Megapixel high performance SONY322+NVP2441 sensor with
25/30fps@1080P, no compressed, no delay, and real-time transmission
image .
★Built in IR-CUT, ensure the camera work properly both day and night.
★IP66 waterproof standard
★SMART-IR,30 meters IR range
★Powerful OSD menu allows for various function settings.
Model
Sensor
Video format
Sync code
S/N Ration
Mini-illumination
AGC
White Balance
OSD
Voltage
Current
Lens
Operate Temperature
Size
Weight
PAL/NTSC
Internal
AUTO
AUTO
Support
Support
DC12V
More than 80dB (with AGC OFF)
Smart IR
Brightness
NR
Backlight
0Lux (IR ON)
2.8-12mm HD Lens
Video output AHD/CVBS
Storage temperature
IR range
Waterproof standard
30m
Ip66
2D-DNR/3D-DNR
AUTO
BLSBVP30/2.0FHD
Effective Pixels 1920(H)x1080(V)
Max. transmission
distance 500M
DAY/NIGHT
Support ICR
-10 ~50 RH90% MAX℃ ℃
-20℃~70℃
Video Frame Rate 25/30fps@1080P
190mA±15%(IR ON);80mA±15%(IR OFF)
Adjustable
SONY322+NVP2441
★Image transmission up to 500 meters.
★Adopts special algorithm, reducing video and color noise andthus
improve image resolution, to produce clearer and sharper image.
★Elegant and solid combined type bracket, with video and
power cable built-in. makes installation convenient and reliable.
445g ±15%
192(L) * 76.6(W) *96.5(H)
1. Fix the camera to the place you need with three screws.
2. Loose the horizontal adjusting ring, and adjust the camera to the place
you need, then fix the horizontal adjusting ring back.
3. Loose the angle fixed screws, and adjust the camera to the place you need,
then fix the angle fixed screws back.
1 2 3
Zoom Focus
122.8
96.5
76.6
Ø76.2
192
