Bradley LVA Series Bedienungsanleitung

Installation

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

215-1850 Rev. A; ECN 17-08-002

Page 1 of 13 4/17/2017

LVAD2

Verge®Wash Basin – LVA-Series with

Evero®Natural Quartz Material

Table of Contents

Components ..................................................................3–4

Supplies Required .............................................................5

Dimensions....................................................................5–6

Rough-Ins .......................................................................7-8

Overflow Plug Assembly....................................................9

Drain Assembly .................................................................9

Faucets and Optional Soap Valve ...................................10

Bowl Mounting .................................................................10

Strainer and P-trap ..........................................................11

Adjust Temperature..........................................................11

Access Panel...................................................................12

Cleaning and Maintenance..............................................13

LVAD2 Installation

24/17/2017 Bradley • 215-1850 Rev. A; ECN 17-08-002

WARNING

Make sure that all water supply lines have been flushed and then completely turned off before beginning

installation. Debris in supply lines can cause valves to malfunction.

Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical

power MUST remain off until installation is complete.

Installer's hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out

rating of 1,000 pounds.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file this

manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances

is the responsibility of the installer. Product warranties may be found under “Products” on our Web site at

www.bradleycorp.com.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging

material. If any parts are missing, do not begin installation until you obtain the missing parts.

For standard height mounting, do not exceed the recommended 33.5" distance from the fixture rim to the

finished floor.

Installation LVAD2

Bradley • 215-1850 Rev. A; ECN 17-08-002 4/17/2017 3

Components

LVAD2BO

Contact your Bradley

Representative for color options

Individual Rough-In Option

Chrome P-trap (S29-094)

Plastic P-trap (269-1697)

O-Ring

(125-111)

Drain

Adapter

Packing

Washer

#10-24

Screw

Drain

Adapter

Prepack

(S45-2480)

Access Panel

(186-1912)

Wall Bracket

(140-1128)

Drain Cap

(111-140)

Drain Cap Spacer

(269-2540)

Trough Strainer

(173-039)

Trough Strainer Screw

(160-353)

Access Panel Bracket

(140-1172)

#10 Access Panel

Thumb Screw

(160-536)

Access Panel Security

Screw Option

(S45-2880)

TMV Valve

(1/2" NPTM

Outlet)

(S45-2701)

Hose Prepack

(S45-2730)

Supply

Fittings

(S45-2510)

TMV Supply

Connections

Plastic Hose

Supply Fittings

(S45-2511)

Hose Prepack

(S45-2731)

Tempered Supply

Connections

Plastic

Hose

Plastic Hose

Stainless

Steel

Hose

LVAD2 Installation

44/17/2017 Bradley • 215-1850 Rev. A; ECN 17-08-002

Components

IR-DCD Faucet

(S53-336)

CAP-DCA Faucet

(S53-334)

Battery Box for

CAP-DCA Faucets

6315-KT0000 Soap Dispenser 6324-68 Soap Dispenser 6334 Soap Dispenser

Optional

Transformer

Plug-In Transformer

Option (PT) for

IR-DCD Faucet

(S53-337)

Plug-in transformer option (PT)

includes Transformer (S53-338),

Adapter (S53-339), and Grounding

Kit (S53-349) for CAP-DCA Faucets

IR-DCG Faucet

(S53-350)

Plug-In Transformer

Option (PT) for

IR-DCG Faucet

(153-486)

*Adapter included with faucet (TMV: S45-2872, TL: S45-2871) *Adapter included with faucet (TMV: S45-2872, TL: S45-2871)

**Adapter S45-2873 included with faucet

Installation LVAD2

Bradley • 215-1850 Rev. A; ECN 17-08-002 4/17/2017 5

Dimensions

Top View (shown with CAP-DCA faucet and 6315 soap)

Front View

Supplies Required

• (6) ³⁄₈" fasteners and wall anchors for bowl and wall bracket (minimum pull-out rating of 1,000 lbs.)

• (4) ¼" fasteners and wall anchors for access panel brackets (minimum pull-out rating of 100 lbs.)

• ½" hot/cold or tempered stub-out

• 1½" NPT drain stub-out(s)

• OPTIONAL: (2) 110 volt GFCI protected electrical outlets for 100–120 VAC plug-in transformers only

• Screen filter(s) as needed, if not included with faucet(s)

• Drill

• Crescent wrench

• Tape Measure

14-3/8"

(366mm)

21"

(533mm)

(127mm) 6"

(152mm)

1-5/8"

(40mm)

2-1/2"

(64mm)

50"

(1270mm)

59-3/4"

(1518mm)

20"

(509mm)

3-3/4"

(95mm)

56-7/8"

(1444mm)

60"

(1524mm)

• Phillips screw driver

• Flat head screw driver

• Level

(152mm)

15"

(381mm)

15"

(381mm)

LVAD2 Installation

64/17/2017 Bradley • 215-1850 Rev. A; ECN 17-08-002

Dimensions – Side View

14"

(357mm)

3-3/4"

(95mm)

20"

(508mm)

21"

(534mm)

20°

7-1/2"

(190mm)

7-1/2"

(191mm)

(50mm)

ADA/TAS Standard Height

ADA/TAS Juvenile Height

(Children 6-12 years)

CSA Standard Height

Dim A 33-1/2" (851mm) 30-1/2" (775mm) 33-1/2" (851mm)

Dim B 27" (686mm) 24" (610mm) 29-29/32" (760mm)

Dim C 13-1/2" (343mm) 10-1/2" (267mm) 13-1/2" (536mm)

Installation LVAD2

Bradley • 215-1850 Rev. A; ECN 17-08-002 4/17/2017 7

Mounting for Standard, ADA and TAS height shown.

Structural Rough-Ins

Points A, B and C require sufficient backing

compliant with local building codes.

WARNING Ensure bowl is completely seated in

the wall bracket and securely fastened

to the wall at point A.

(mm)

CODE DESCRIPTION QTY.

A Install (1) 3/8" wall anchor with a minimum pull-out force of 1,000 lbs. per local codes at locations shown 2

Provide structural backing compliant with local building codes.

Install wall anchor with a minimum pull-out force of 100 lbs. per local codes at locations shown

Wall Bracket

RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE

33½" No Adjustment Standard Height, ADA, TAS and CSA

30½" Subtract 3" Juvenile, ADA and TAS

28-1/8"

(723)

Bottom

Bracket

33-1/2"

(851)

24-1/8"

(612)

13-1/8"

(333)

27-5/8"

(701)

27-5/8"

(701)

24-1/8"

(612)

3/4"

(19)

36-1/2" (927)

25" (635) 25" (635)

25-1/4"

(640)

Secure bracket to wall using min. (2)

3/8" anchor bolts to the left of C/L and

min. (2) 3/8" anchor bolts to the right

of C/L. The (2) anchor bolts to the right

of C/L must be min. 16" apart from the

anchor bolts to the left of C/L. When

mounting is complete, check to ensure

the bracket is level. See Step 1: Bracket

Mounting for more information.

31-1/2"

(800)

LVAD2 Installation

84/17/2017 Bradley • 215-1850 Rev. A; ECN 17-08-002

Plumbing and Electrical Rough-Ins

Mounting for Standard, ADA and TAS height shown.

(mm)

33-1/2"

(851)

24-1/8"

(613)

17-1/2"

(444)

Min

H C

2-1/4"

(57)

(25)

Finished Floor

25" (635)

4-1/2"

(114)

CODE DESCRIPTION QTY.

A 1½" NPT Drain, Stub-out 2" from wall 1

H,C ½" Nominal (⁵⁄₈" O.D. Comp.) Hot/Cold supplies, Stub-out 2" from wall 1

E 110V GFI protected electrical outlet 2

Installation LVAD2

Bradley • 215-1850 Rev. A; ECN 17-08-002 4/17/2017 9

Bracket Mounting

Typical installation is shown. It may be necessary to repair the wall

after mounting. The fixture may not cover all of the wall modifications.

Mounting height per structural rough-in dimensions.

For ease of drain installation, lay the bowl on its back.

2Drain Assembly

Install wall bracket to wall

per structural rough-in

dimensions. Check to

ensure the bracket is

level. Example anchor

locations shown.

16"

(406mm)

min.

O-Ring

Drain

Adapter

Packing

Washer

#10-24

Screw

Assemble the remaining components as

shown and thread the four screws through

the drain adapter and into the basin inserts.

Ensure the screws compress the drain

adapter evenly onto the basin.

LVAD2 Installation

10 4/17/2017 Bradley • 215-1850 Rev. A; ECN 17-08-002

Bowl Mounting (to Bracket and Wall)

Faucet Installation

For ease of drain installation,

lay the bowl on its back.

Install the faucets and optional

soap valves according to the

manufacturer's instructions.

Position bowl above wall bracket.

Press firmly on the back of the bowl

to seat the bowl flange into the wall

bracket lip. Ensure bowl is level.

ASecure the bowl to the wall anchors

using fasteners per the structural

rough-in requirement (supplied by

installer).

WARNING Ensure bowl is completely seated in

the wall bracket and securely fastened

to the wall at point A.

CAUTION Bracket is not

intended to support

the weight of bowl

for an extended

period of time. Be

sure to secure the

bowl to the wall

using appropriate

fasteners.

Other basin models may be shown

for faucet mounting visual.

CAUTION Positioning bowl

onto bracket may

require two people.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bradley Badezimmerarmatur Handbücher

Bradley

Bradley MF2904/AST4 Bedienungsanleitung

Bradley

Bradley S19-130BF Bedienungsanleitung

Bradley

Bradley TouchTime 1C Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley Bradmar 400 Series Bedienungsanleitung

Bradley

Bradley Verge LVRD Series Bedienungsanleitung

Bradley

Bradley Express EXD-3/WHTAS Bedienungsanleitung

Bradley

Bradley S19-310UU Bedienungsanleitung

Bradley

Bradley S19345HXB Bedienungsanleitung

Bradley

Bradley S19-120 Bedienungsanleitung

Bradley

Bradley LUCENT Series Bedienungsanleitung

Bradley

Bradley SN2005/IR Bedienungsanleitung

Bradley

Bradley Express SS Series Bedienungsanleitung

Bradley

Bradley SXWS9557FM Bedienungsanleitung

Bradley

Bradley SXWS9148FM Bedienungsanleitung

Bradley

Bradley S19-315FPBF Bedienungsanleitung

Bradley

Bradley TDB3105 Bedienungsanleitung

Bradley

Bradley S19-310UU Bedienungsanleitung

Bradley

Bradley CBSHWR9000KD Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley Verge LVLD Series Bedienungsanleitung

Bradley

Bradley WS-3WMT Bedienungsanleitung

Bradley

Bradley CBSHWR9000 Bedienungsanleitung

Bradley

Bradley S19-310FW Bedienungsanleitung

Beliebte Badezimmerarmatur Handbücher anderer Marken

DURAVIT

DURAVIT C.1 C15240 0090 Handbuch

Sunshower

Sunshower PURE SOLO Bedienungsanleitung

Heatstore

Heatstore HSTRL500WTN Bedienungsanleitung

Delabie

Delabie Delabie Sporting 714700 Bedienungsanleitung

Kohler

Kohler K-13056 Montageanleitung

ESS

ESS Container TCL-11 Bedienungsanleitung

Mustee

Mustee 22C Bedienungsanleitung

VITRA

VITRA V-Flow Bedienungsanleitung

Malmet

Malmet B105BT Bedienungsanleitung

bathstore

bathstore Transition H1690MM Leitfaden

baliv

baliv DUK-80.30 T Bedienungsanleitung

baliv

baliv DU-5160 Bedienungsanleitung

BELLOSTA

BELLOSTA Edward 0800/M Bedienungsanleitung

Franke

Franke PRTR0006 Bedienungsanleitung

Gessi

Gessi RILIEVO 59011 Bedienungsanleitung

noken

noken VITAE 100188525-N299998810 Bedienungsanleitung

Allen + Roth

Allen + Roth 1142VA-30-201 Bedienungsanleitung

Britex

Britex HBDA Bedienungsanleitung