Bradley Verge LVA Series Bedienungsanleitung

Installation

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

215-1850 Rev. G: ECO 22-08-019

Page 1 of 13 6/1/2022

LVAD2

Verge®Wash Basin – LVA-Series with

Evero®Natural Quartz Material

Read the instructions in this manual before beginning installation. Save these instructions and refer to

them for inspection, maintenance, and troubleshooting information.

For questions regarding the operation, installation or maintenance of this product, visit bradleycorp.com or call 800.BRADLEY (800.272.3539).

Product warranties and parts information may also be found under “Resources” on our website at bradleycorp.com.

Table of Contents

Safety Information .............................................................2

Supplies Required .............................................................2

Components ......................................................................3

Dimensions........................................................................4

Structural Rough-In ...........................................................6

Plumbing and Electrical Rough-In.....................................7

Bracket Mounting...............................................................8

Drain Assembly .................................................................8

Basin Bracket for Access Panel Installation –

Evero Matte only................................................................9

Faucet and Soap Installation.............................................9

Bowl Mounting (to Bracket and Wall)...............................10

Strainer and Drain Cap....................................................11

Adjust Temperature with Water Running .........................11

Access Panel...................................................................12

Cleaning and Maintenance for Evero..............................13

Cleaning and Maintenance Instructions for

Stainless Steel.................................................................13

LVAD2 Installation

26/1/2022 Bradley • 215-1850 Rev. G: ECO 22-08-019

Safety Information

WARNING

Make sure that all water supply lines have been flushed and then completely turned off before beginning

installation. Debris in supply lines can cause valves to malfunction.

Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical

power MUST remain off until installation is complete.

Installer's hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out

rating of 1,000 pounds.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file this

manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances

is the responsibility of the installer. Product warranties may be found under “Products” on our Website at

www.bradleycorp.com.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging

material. If any parts are missing, do not begin installation until you obtain the missing parts.

For standard height mounting, do not exceed the recommended 33.5" distance from the fixture rim to the

finished floor.

Supplies Required

• (6) ³⁄₈" fasteners and wall anchors for bowl and wall bracket (minimum pull-out rating of 1,000 lb)

•(4) ¼" fasteners and wall anchors for access panel brackets (minimum pull-out rating of 100 lb)

•½" hot/cold or tempered stub-out

•1½" NPT drain stub-out(s)

•OPTIONAL: (1) 110V GFCI protected electrical outlets for 100–120VAC plug-in transformers only

•Screen filter(s) as needed, if not included with faucet(s)

• Drill

•Crescent wrench

•Tape measure

•Phillips screw driver

•Flat head screw driver

• Level

Installation LVAD2

Bradley • 215-1850 Rev. G: ECO 22-08-019 6/1/2022 3

Components

LVAD2BO

Contact your Bradley

Representative for color options

Individual Rough-In Option

Chrome P-Trap (S29-094)

Plastic P-Trap (269-1697)

O-Ring

(125-111)

Drain

Adapter

Packing

Washer

#10-24

Screw

Drain

Adapter

Prepack

(S45-2480)

Access Panel

(186-1912)

Wall Bracket

(140-1128)

Drain Cap

(111-140)

Drain Cap Spacer

(269-2540)

Trough Strainer

(173-039)

Trough Strainer Screw

(160-353)

TMV Supply Connections

Hose Prepack

(S45-2731)

Hose Prepack

(S45-2730)

TMV Valve

(¹⁄₂" NPTM Outlet)

(S45-2701)

Tempered Supply Connections

Plastic

Hose

Plastic

Hose

Plastic Hose

Stainless

Steel

Hose

Supply Fittings

(Standard)

(S45-2511)

and

(S45-3000)

for Verge Faucets

S53-3100, S53-3300,

S53-3500, & S53-3700

Supply Fittings

(Standard)

(S45-2510)

and

(S45-2999)

for Verge Faucets

S53-3100, S53-3300,

S53-3500, & S53-3700

Access Panel Wall Bracket

(140-1172)

#10 Access Panel

Thumb Screw

(160-536)

Access Panel Security

Screw Option

(S45-2880)

Evero Matte

Basin Bracket

for Access Panel

(140-1256)

LVAD2 Installation

46/1/2022 Bradley • 215-1850 Rev. G: ECO 22-08-019

Dimensions (mm)

Top View (shown with Crestt Faucet and Soap)

Front View

14³⁄₈"

(366)

21"

(534)

5" (127) 6" (152) 6" (152)

57¹⁄₁₆" (1449)

15" (381) 15" (381)

50" (1270)

59¾" (1518)

20"

(508)

3¾" (95)

60" (1524)

Installation LVAD2

Bradley • 215-1850 Rev. G: ECO 22-08-019 6/1/2022 5

Dimensions – Side View (mm)

Side View with Faucet Side View with WashBar Duo

4¼" (107)

6¼"

(158)

(178)

13½"

(343)

3¾" (95)

20"

(508)

21" (534)

20°

5" (126)

7½" (190)

ADA/TAS

Standard Height

ADA/TAS Juvenile Height

(Children 6-12 years)

CSA

Standard Height

Dim A 33½" (851) 30½" (775) 33½" (851)

Dim B 27" (686) 24" (610) 29²⁹⁄₃₂" (760)

Dim C 13½" (343) 10½" (267) 13½" (536)

Notes At least one basin must meet the dimensional requirements

and have proper reach, knee, and toe clearance

At least one basin must meet the dimensional requirements

and have proper reach, knee, and toe clearance

LVAD2 Installation

66/1/2022 Bradley • 215-1850 Rev. G: ECO 22-08-019

Mounting for Standard, ADA, and TAS height shown.

Structural Rough-In (mm)

Points A, B, and C require sufficient backing

compliant with local building codes.

CODE DESCRIPTION QTY.

AInstall (1) ³⁄₈" wall anchor with a minimum pull-out force of 1,000 lb per local codes at locations shown 2

Provide structural backing compliant with local building codes.

Install wall anchor with a minimum pull-out force of 100 lb per local codes at locations shown

Wall Bracket

RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE

33½" No Adjustment Standard Height, ADA, TAS, and CSA

30½" Subtract 3" Juvenile, ADA, and TAS

29⁵⁄₈"

(753)

Bottom

Bracket

33½"

(851)

14¼"

(362)

15³⁄₈"

(391)

27⁵⁄₈" (701) 27⁵⁄₈" (701)

24¹⁄₈" (612) 24¹⁄₈" (612)

¾"

(19)

36½" (927)

25" (635) 25" (635)

25¼"

(640)

Secure bracket to wall using min. (2) ³⁄₈" anchor bolts to

the left of C/L and min. (2) ³⁄₈" anchor bolts to the right of

C/L. The (2) anchor bolts to the right of C/L must be min.

16" apart from the anchor bolts to the left of C/L. When

mounting is complete, check to ensure the bracket is level.

See Step 1: Bracket Mounting for more information.

31½"

(800)

WARNING The bracket is not designed to support the

bowl. Wall bracket is a temporary support until

bowl is mounted at location "A". Ensure bowl

is completely seated in the wall bracket and

securely fastened to the wall at point A.

Installation LVAD2

Bradley • 215-1850 Rev. G: ECO 22-08-019 6/1/2022 7

(mm)

5⁹⁄₁₆"

(141)

24¹⁄₈"

(613)

23¾"

(603)

27¼"

(692)

24⁷⁄₈"

(633)

17½"

(444)

F F

H C

1" (25)

Finished Floor

Approx. Soap

Battery Box

Location

Approx. Soap

Battery Box

Location

25" (635)19" (482)

19" (482)

8¹⁄₈"

(205)

3¹⁄₈"

(80) 7¾"

(198)

4½"

(114)

¼"

(5)

3¹⁄₈"

(80)

3¼" (83)

G GG G

CODE DESCRIPTION QTY.

A 1½" NPT Drain, Stub-out 2" from wall 1

H,C ½" Nominal (⁵⁄₈" O.D. Comp.) Hot/Cold supplies, Stub-out 2" from wall 1

E110V GFI protected electrical outlet

WashBar Duo requires 120 VAC, GFCI outlet properly grounded 2

F #10 Anchors for Faucet Control Box Installation 4

G #10 Anchors for Soap Tank Installation 4

Plumbing and Electrical Rough-In

Mounting for Standard, ADA, and TAS height shown.

Verge™ deck-mounted soap dispenser and faucet rough-in is shown below.

For rough-in information on the LVAD2 Verge Wash Basin with WashBar Duo,

refer to the WashBar Duo WBD1 tech data.

LVAD2 Installation

86/1/2022 Bradley • 215-1850 Rev. G: ECO 22-08-019

Bracket Mounting

Typical installation is shown. It may be necessary to repair the wall

after mounting. The fixture may not cover all of the wall modifications.

Mounting height per structural rough-in drawing.

For ease of drain installation, lay the bowl on its back.

2Drain Assembly

16"

(406mm)

min.

O-Ring

Drain

Adapter

Packing

Washer

#10-24 x 1/2"

Screw

Assemble the remaining components as

shown and thread the four screws through

the drain adapter and into the basin inserts.

Ensure the screws compress the drain

adapter evenly onto the basin.

Install wall bracket to wall per

the Structural Rough-In drawing.

Check to ensure bracket is level.

(Example anchor locations are

shown below.)

Installation LVAD2

Bradley • 215-1850 Rev. G: ECO 22-08-019 6/1/2022 9

For ease of installation, leave the bowl laying on its back.

Follow the installation instructions shipped with the faucet and soap

units for assembly and installation information.

Basin Bracket for Access Panel Installation – Evero Matte only

Faucet and Soap Installation

Attach the supplied basin bracket for access

panel (140-1256) using the #10 fasteners

provided into the three threaded insert locations

on the bowl.

#10 Fasteners

Basin Bracket

for Access Panel

(Evero Matte only)

Evero Matte

Basin Bracket

for Access Panel

Locations

LVAD2 Installation

10 6/1/2022 Bradley • 215-1850 Rev. G: ECO 22-08-019

Bowl Mounting (to Bracket and Wall)

Position bowl above wall bracket.

Press firmly on the back of the bowl

to seat the bowl flange into the wall

bracket lip. Ensure bowl is level.

ASecure the bowl to the wall anchors

using fasteners per the structural

rough-in requirement (supplied by

installer).

WARNING Ensure bowl is completely seated in the wall bracket

and securely fastened to the wall at point A.

CAUTION Bracket is not intended to support the weight of bowl

for an extended period of time. Be sure to secure the

bowl to the wall using appropriate fasteners.

CAUTION Positioning bowl onto bracket may require two people.

Andere Handbücher für Verge LVA Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Bradley Badezimmerarmatur Handbücher

Bradley

Bradley S19-310SBFW Bedienungsanleitung

Bradley

Bradley Express EXD-3/WHTAS Bedienungsanleitung

Bradley

Bradley 500 Series Bedienungsanleitung

Bradley

Bradley Express SS Series Bedienungsanleitung

Bradley

Bradley S19-280D Bedienungsanleitung

Bradley

Bradley WF2705 Bedienungsanleitung

Bradley

Bradley S19-310AC Bedienungsanleitung

Bradley

Bradley Verge LVA Series Bedienungsanleitung

Bradley

Bradley Express SS Series Bedienungsanleitung

Bradley

Bradley LVA Series Bedienungsanleitung

Bradley

Bradley Halo S19314EW Bedienungsanleitung

Bradley

Bradley SXWS9148FM Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley S19-125BF Bedienungsanleitung

Bradley

Bradley TouchTime 1C Bedienungsanleitung

Bradley

Bradley LOFT Series Bedienungsanleitung

Bradley

Bradley SN2005/IR Bedienungsanleitung

Bradley

Bradley Advocate AV Series Bedienungsanleitung

Bradley

Bradley MF2904/AST4 Bedienungsanleitung

Bradley

Bradley S19-120HFP Bedienungsanleitung

Bradley

Bradley WS-3WMT Bedienungsanleitung

Bradley

Bradley Advocate AV Series Bedienungsanleitung

Bradley

Bradley S19-310SPR Bedienungsanleitung

Bradley

Bradley SXWS9561 Bedienungsanleitung

Beliebte Badezimmerarmatur Handbücher anderer Marken

DURAVIT

DURAVIT C.1 C15240 0090 Handbuch

Sunshower

Sunshower PURE SOLO Bedienungsanleitung

Heatstore

Heatstore HSTRL500WTN Bedienungsanleitung

Delabie

Delabie Delabie Sporting 714700 Bedienungsanleitung

Kohler

Kohler K-13056 Montageanleitung

ESS

ESS Container TCL-11 Bedienungsanleitung

Mustee

Mustee 22C Bedienungsanleitung

VITRA

VITRA V-Flow Bedienungsanleitung

Malmet

Malmet B105BT Bedienungsanleitung

bathstore

bathstore Transition H1690MM Leitfaden

baliv

baliv DUK-80.30 T Bedienungsanleitung

baliv

baliv DU-5160 Bedienungsanleitung

BELLOSTA

BELLOSTA Edward 0800/M Bedienungsanleitung

Franke

Franke PRTR0006 Bedienungsanleitung

Gessi

Gessi RILIEVO 59011 Bedienungsanleitung

noken

noken VITAE 100188525-N299998810 Bedienungsanleitung

Allen + Roth

Allen + Roth 1142VA-30-201 Bedienungsanleitung

Britex

Britex HBDA Bedienungsanleitung