Bradley Verge LVS Series Bedienungsanleitung

Installation

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

215-1828 Rev. B; ECN 16-08-008

Page 1 of 12 6/6/2016

LVSD1

Verge®Lavatory System – LVS-Series

with Evero®Natural Quartz Material

Table of Contents

Components ..................................................................3–4

Supplies Required .............................................................5

Dimensions....................................................................5–6

Rough-Ins ..........................................................................7

Frame Mounting.................................................................8

Faucet Box and Valve Mounting ........................................9

Overflow Plug Assembly....................................................9

Drain Assembly ...............................................................10

Faucets and Optional Soap Valve ...................................10

Bowl Mounting .................................................................11

Strainer and P-trap ..........................................................11

Adjust Temperature..........................................................12

Trap Cover .......................................................................12

Cleaning and Maintenance..............................................13

LVSD1 Installation

26/6/2016 Bradley • 215-1828 Rev. B; ECN 16-08-008

WARNING

Make sure that all water supply lines have been flushed and then completely turned off before beginning

installation. Debris in supply lines can cause valves to malfunction.

Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical

power MUST remain off until installation is complete.

Installer's hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out

rating of 1,000 pounds.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file this

manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances

is the responsibility of the installer. Product warranties may be found under “Products” on our Web site at

www.bradleycorp.com.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging

material. If any parts are missing, do not begin installation until you obtain the missing parts.

For standard height mounting, do not exceed the recommended 33.5" distance from the fixture rim to the

finished floor.

Installation LVSD1

Bradley • 215-1828 Rev. B; ECN 16-08-008 6/6/2016 3

Components

Bowl

Contact your Bradley Representative for

color options

Individual Rough-In Option

Chrome P-trap (S29-094)

Plastic P-trap (269-1697)

Complete Drain Prepack

(S45-2862)

O-Ring

(125-111)

Drain

Adapter

Packing

Washer

#10-24

Screw

Drain

Adapter

Prepack

(S45-2480)

Prepack

(S45-2861) *Screw

Strainer

*Standoff, Hex,

SS #6-32 x 1"

*Screw #6-32

x 1-1/4" Pan

*Included in

Prepack S45-2778

Access Panel

(186-1904)

Wall Bracket

(140-1153)

TMV Valve

(½" NPTM

Outlet)

(S45-2701)

Hose Prepack

(S45-2730)

Supply

Fittings

(S45-2712)

Hose Prepack

(S45-2702)

TMV Supply

Connections

Tempered Supply

Connections

Plastic Hose

Plastic

Hose

LVSD1 Installation

46/6/2016 Bradley • 215-1828 Rev. B; ECN 16-08-008

Components

IR-DCD Faucet*

(S53-336)

CAP-DCA Faucet**

(S53-334)

Battery Box for

CAP-DCA Faucets

6315-KT0000 Soap Dispenser 6324-68 Soap Dispenser 6334 Soap Dispenser

Optional

Transformer

Plug-In Transformer

Option (PT) for

IR-DCD Faucet

(S53-337)

Plug-in transformer option (PT)

includes Transformer (S53-338),

Adapter (S53-339), and Grounding

Kit (S53-349) for CAP-DCA Faucets

IR-DCG Faucet*

(S53-350)

Plug-In Transformer

Option (PT) for

IR-DCG Faucet

(153-486)

*Adapter included with faucet (TMV: S45-2872, TL: S45-2871) *Adapter included with faucet (TMV: S45-2872, TL: S45-2871)

**Adapter S45-2873 included with faucet

Installation LVSD1

Bradley • 215-1828 Rev. B; ECN 16-08-008 6/6/2016 5

Dimensions

Top View (shown with CAP-DCA faucet and 6315 soap)

Front View

Supplies Required

• (4) ³⁄₈" fasteners and wall anchors (minimum pull-out rating of 1,000 lbs.)

• (2) ¼" fasteners and wall anchors (minimum pull-out rating of 100 lbs.)

• ½" hot/cold or tempered stub-out

• 1½" NPT drain stub-out(s)

• OPTIONAL: (1) 110 volt GFCI protected electrical outlets for 100–120 VAC plug-in transformers only

• Screen filter(s) as needed, if not included with faucet(s)

• OPTIONAL: (1) ³⁄₈" NPS x ³⁄₈" NPT Male Adapter for IR-DCD faucet only

21"

(533mm)

4¼"

(165mm)

(152mm)

2" (51mm)

2½"

(64mm)

19³⁄₈"

(492mm)

30"

(762mm)

12⁷⁄₈"

(327mm)

1⁷⁄₈"

(48mm)

LVSD1 Installation

66/6/2016 Bradley • 215-1828 Rev. B; ECN 16-08-008

Dimensions – Side View

14"

(356mm)

13¹⁄₈"

(333mm)

10¹⁄₈"

(257mm)

18½"

(470mm)

ADA/TAS Standard

Height

ADA/TAS Juvenile Height

(Children 6-12 years)

CSA Standard

Height

OBC Standard

Height

AODA-2015

Standard Height

Dim A 33½" (851mm) 31" (787mm) 33½ (851mm) 33" (838mm) 32½" (826mm)

Dim B 27" (686mm) 24" (610mm) 29⁵⁄₈" (752mm) 28¹⁵⁄₁₆" (735mm) 28¹⁵⁄₁₆" (735mm)

Dim C 20¾ (527mm) 18¼ (464mm) 21¹⁄₈" (536mm) 20¼" (514mm) 19¾" (502mm)

Installation LVSD1

Bradley • 215-1828 Rev. B; ECN 16-08-008 6/6/2016 7

Mounting for Standard, ADA and TAS height shown.

Structural Rough-Ins

Points A, B and C require sufficient backing

compliant with local building codes.

Secure bracket to wall using min.

³⁄₈" anchor bolt to the left of C/L and

min. ³⁄₈" anchor bolt to the right of

C/L. The anchor bolt to the right

of C/L must be min. 5" apart from

the anchor bolt to the left of C/L.

When mounting is complete, check

to ensure the bracket is level. See

Step 1: Bracket Mounting for more

information.

31½"

(800mm)

(203mm)

10"

(254mm)

29½"

(749mm)

Bottom of

Bracket

CODE DESCRIPTION QTY.

A Install (1) 3/8" wall anchor with a minimum pull-out force of 1,000 lbs. per local codes at locations shown 2

Provide structural backing compliant with local building codes.

Install wall anchor with a minimum pull-out force of 100 lbs. per local codes at locations shown

21½"

(546mm)

Wall Bracket

WARNING Ensure bowl is completely seated in

the wall bracket and securely fastened

to the wall at point A.

RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE

33½" No Adjustment Standard Height, ADA, TAS and CSA

30½" Subtract 3" Juvenile, ADA and TAS

32½" Subtract 1" AODA

33" Subtract ½" OBC

25¾"

(654mm)

33½"

(851mm)

(203mm)

9½"

(241mm)

9½"

(241mm)

10"

(254mm)

10"

(254mm)

LVSD1 Installation

86/6/2016 Bradley • 215-1828 Rev. B; ECN 16-08-008

Plumbing and Electrical Rough-Ins

Mounting for Standard, ADA and TAS height shown.

CODE DESCRIPTION QTY.

A 1½" NPT Drain, Stub-out 2" from wall, individual waste option 1

H,C ½" Nominal (⁵⁄₈" O.D. Comp.) Hot/Cold supplies, Stub-out 2" from wall 1

E 110V GFI protected electrical outlet (AC faucet and soap only) 1

P Outline of soap container (if selected) 1

33½"

(851)

Rim

Height

4" - 5"

(105 - 127)

2" - 3"

(51 - 76)

7" - 8"

(178 - 203)

20¾"

(527)

23" - 24"

(584 - 610)

20" - 23"

(508 - 584)

26" - 27"

(660 - 686)

H C

(mm)

Installation LVSD1

Bradley • 215-1828 Rev. B; ECN 16-08-008 6/6/2016 9

Bracket Mounting

Typical installation is shown. It may be necessary to repair the wall

after mounting. The fixture may not cover all of the wall modifications.

(127mm)

min.

Install wall bracket to wall

per structural rough-in

dimensions. Check to

ensure the bracket is

level. Example anchor

locations shown.

Mounting height per structural rough-in dimensions.

For ease of drain installation, lay the bowl on its back.

2Drain Assembly

Thread screw into drain

adapter until it becomes

fully engaged.

Thread the standoff onto

the now fully engaged

screw.

BO-Ring

Drain

Adapter

Packing

Washer

#10-24

Screw

#6-32 x 1-1/4"

Screw

Standoff, Hex

SS #6-32 x 1"

Assemble the remaining components as

shown and thread the four screws through

the drain adapter and into the basin inserts.

Ensure the screws compress the drain

adapter evenly onto the basin.

LVSD1 Installation

10 6/6/2016 Bradley • 215-1828 Rev. B; ECN 16-08-008

Bowl Mounting (to Bracket and Wall)

Strainer and P-Trap

Strainer

Thread the strainer screw

through the strainer and

into the stand off on the

drain adapter.

Position bowl above wall bracket.

Press firmly on the back of the bowl

to seat the bowl flange into the wall

bracket lip. Ensure bowl is level.

Secure the bowl to the wall anchors

using fasteners per the structural

rough-in requirement (supplied by

installer).

Ensure not to overtighten

the strainer screw.

WARNING Ensure bowl is completely seated in

the wall bracket and securely fastened

to the wall at point A.

Faucet Installation

3For ease of drain installation,

lay the bowl on its back.

Install the faucets and optional

soap valves according to the

manufacturer's instructions.

CAUTION Bracket is not

intended to support

the weight of bowl

for an extended

period of time. Be

sure to secure the

bowl to the wall

using appropriate

fasteners.

Install supplied p-trap to

drain adapter.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bradley Badezimmerarmatur Handbücher

Bradley

Bradley S19-310 Bedienungsanleitung

Bradley

Bradley TDB3105 Bedienungsanleitung

Bradley

Bradley SXWS9557FM Bedienungsanleitung

Bradley

Bradley Terrazzo WF2613 Bedienungsanleitung

Bradley

Bradley S19-120 Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley WF2705 Bedienungsanleitung

Bradley

Bradley OmniDeck 4000 Series Bedienungsanleitung

Bradley

Bradley S19-310FW Bedienungsanleitung

Bradley

Bradley S19-315FPBF Bedienungsanleitung

Bradley

Bradley S19-310UU Bedienungsanleitung

Bradley

Bradley S19-110BF Bedienungsanleitung

Bradley

Bradley Express SS-3N/IR/STD Bedienungsanleitung

Bradley

Bradley OmniDeck with WashBar 5000 Series Bedienungsanleitung

Bradley

Bradley SN2005/TT Bedienungsanleitung

Bradley

Bradley Advocate AV Series Bedienungsanleitung

Bradley

Bradley HSR20 Bedienungsanleitung

Bradley

Bradley Verge LVLD Series Bedienungsanleitung

Bradley

Bradley LC700 Bedienungsanleitung

Bradley

Bradley s19314 series Bedienungsanleitung

Bradley

Bradley Express SS Series Bedienungsanleitung

Bradley

Bradley S19-310AC Bedienungsanleitung

Bradley

Bradley S19-310AC Bedienungsanleitung

Bradley

Bradley WF2608 Bedienungsanleitung

Beliebte Badezimmerarmatur Handbücher anderer Marken

DURAVIT

DURAVIT C.1 C15240 0090 Handbuch

Sunshower

Sunshower PURE SOLO Bedienungsanleitung

Heatstore

Heatstore HSTRL500WTN Bedienungsanleitung

Delabie

Delabie Delabie Sporting 714700 Bedienungsanleitung

Kohler

Kohler K-13056 Montageanleitung

ESS

ESS Container TCL-11 Bedienungsanleitung

Mustee

Mustee 22C Bedienungsanleitung

VITRA

VITRA V-Flow Bedienungsanleitung

Malmet

Malmet B105BT Bedienungsanleitung

bathstore

bathstore Transition H1690MM Leitfaden

baliv

baliv DUK-80.30 T Bedienungsanleitung

baliv

baliv DU-5160 Bedienungsanleitung

BELLOSTA

BELLOSTA Edward 0800/M Bedienungsanleitung

Franke

Franke PRTR0006 Bedienungsanleitung

Gessi

Gessi RILIEVO 59011 Bedienungsanleitung

noken

noken VITAE 100188525-N299998810 Bedienungsanleitung

Allen + Roth

Allen + Roth 1142VA-30-201 Bedienungsanleitung

Britex

Britex HBDA Bedienungsanleitung