BrainLight FLOAT PLUS Bedienungsanleitung
brainLight®-3D-Shiatsu Massage Chair FLOAT PLUS
brainLight®-3D-Shiatsu Massage Chair FLOAT PLUS
Thank you very much for purchasing the brainLight®-3D-Shiatsu Massage Chair FLOAT PLUS! The 3D-FLOAT PLUS
presents an upgrade of our 3D-FLOAT with a shoulder air pressure massage, foot sole massage and improved 3D
technology. Through an optimised bodyscan, the chair adjusts the massage directly to your body and pampers you in
the areas of your back, hips, shoulders, neck, feet and legs, using various Shiatsu massage and stretching techniques. You
have chosen the perfect revitalisation for your body.
In order to get the best experience out of the various functions of your massage chair, please read this manual
carefully before using it, especially the safety instructions.
Contents
Safety Instructions ..................................................... 3
Massage Chair Components ...................................... 6
Setup Instructions ..................................................... 8
Acupressure Points .....................................................11
Massage and Remote Control Functions .................... 12
– Automatic Programs ............................................... 13
– Automatic Recline Positions ....................................15
– Basic Settings ......................................................... 16
– Air Pressure Massage ...............................................17
– Massage for the Soles of the Feet ........................... 18
– Manual Back Massage ............................................ 18
– Half-automatic Back Massage ................................ 21
LCD Features ............................................................ 22
General Instructions for Use ...................................... 23
Troubleshooting: No Power ....................................... 25
Replacing the Main Fuse ............................................ 26
Product Specications .............................................. 27
2
brainLight®-3D-Shiatsu Massage Chair FLOAT PLUS Safety Instructions
To prevent any damage, accident or injury, please consider the following safety instructions:
1. People with any of the following conditions are advised to consult their physician or therapist before using the chair:
•People with heart diseases
•People with malignant tumors
•Women during pregnancy or menstruation
•People with abnormalities or curvature of the spine
•People under medical treatment
•People with osteoporosis
People suffering from thrombosis or similar vein conditions are advised not to use the foot and calf massage functions.
Children, those who are ill and disabled people should only use the chair under the supervision of an adult/carer.
2. Installation of the chair:
• Position the chair only on a at, level surface.
•Do not place the chair in a dirty, oily, foggy or damp environment.
•Do not expose the chair to direct sunlight and do not place it too close to other electrical appliances.
3. Before the application:
•Please read the safety instructions thoroughly before using your chair.
•People who weigh over 130kg / 20.5 stone / 286 lbs are not permitted to use the chair.
3
Safety Instructions
4. During the application:
•Do not allow children to play on the chair.
•Keep hands and feet away from the mechanics of the chair.
•Do not use the chair when it is wet and do not operate the chair with damp hands.
•Sit in the chair in an upright position.
•Do not insert any objects into the mechanics, seat cushion or footrest of the chair.
•The massage chair should not be used by more than one person at any time.
•Do not eat or drink while using the massage chair.
•Folding back the neck cushion results in a stronger massage in the neck area.
5. After the application:
•We recommend that after every use of the chair – as is recommended after any type of massage – you drink plenty
of water, in order to help the removal of toxins and waste from the limbic system.
•Please unplug the power cord from the wall socket when the chair is not in use.
6. Do not take the chair apart!
•Do not attempt to dismantle, repair, or modify the chair without the technical guidance of brainLight®GmbH.
•Do not clean the chair with alcohol or evaporative solvents.
•Unplug the power cord when cleaning or maintaining the chair.
Footrest and Armrests
Caution: In order to avoid injury and damage to the chair, please do not sit or stand on the footrest and please do not
lean or sit on the armrests.
4
Caution:
•If you feel unwell or ill when using the chair, pause your session immediately by pushing the POWER-button.
•Unplug the power cord and do not use the chair if the leather or fabric cover is torn or worn-out. Contact the main-
tenance department at brainLight®GmbH.
•If you use greasy hair products, please place a towel under your head in order to protect the cover material of the chair.
• Please handle the remote control with care and operate using dry hands. A light touch with your ngertips is enough to
operate the chair. Please do not use any other, particularly sharp, objects to operate the remote control (pens, ngernails
etc.).
HEAT Function
In order to avoid the chair becoming uncomfortably hot, we advise you to wear appropriate clothing when using the
heat function.
•Children, disabled people and those with reduced sensory perception should not use the HEAT function.
•Do not use the HEAT function for longer than 30 minutes at one time. Allow the massage chair a few minutes to cool
down before using it again. Continuous use of the HEAT function can lead to overheating.
•For optimal well-being, we recommend the use of the HEAT function in combination with the massage functions.
•Turn off the HEAT function separately before switching off the whole chair using the POWER button.
Safety Instructions Safety Instructions
5
Shoulder
air pressure
massage
Backrest
Left side panel / Armrest
Casters
Massage Chair Components
Remote Control
Arm air pressure massage
Waist air pressure massage
Seat air pressure massage
Calf air pressure massage
Foot air pressure massage
Foot sole massage
6
Massage Chair Components Massage Chair Components
Main Switch Box
Power Cable Connection
Cartridge with Main Fuse
ON/OFF Switch
7
Setup Instructions
If your massage chair was delivered by brainLight®
GmbH, the following 12 steps have already been carried
out for you.
Step 1
Remove all packaging material. If you use sharp or poin-
ted tools, make sure not to damage the chair and the ac-
cessories.
Step 2
Pull back the backrest until it snaps in with a "click" sound.
Step 3
Put the side panels to the left and right of the chair. For
protection, please place a thick piece of material or a rug
on the oor under the side panels. On both sides, you will
nd 3 colour-coded air hoses. Connect the air hoses on
the armrests with the respective coloured air hoses at-
tached to the chair.
Step 4
Secure the 3 colour-coded air hoses with the metal clamp.
Step 2
The backrest locks into place with a „click“
sound when folded up.
Connect and secure the air hoses (3 air
hoses on each side of the chair).
Step 3 - 4
8
Setup Instructions Setup Instructions
Step 5
Subsequently, screw the side panels to the left and right
side of the chair frame. The 6 screws required for this are
packed separately (3 screws for each side panel). Please
make sure that the screws are sufciently tightened.
Step 6
Pull out the air hoses in the shoulder area on the backrest
about 8 cm on both sides.
Step 7
Connect each of these air hoses with the L-shaped con-
necting pieces of the shoulder massage units and push the
air hoses around 5 cm back into the backrest.
Step 8
Afx the shoulder massage units at the top and the bot-
tom with the screws that are already attached to the back
frame. Fasten the two zips on the left and right side of the
back frame cover.
Step 5
Afx the armrests with 3 screws on each
side.
Afx the shoulder massage units with the
pre-attached screws – 2 on each side.
Step 8
9
Step 9
Install the remote control holder: loosen the 3 pre-attached
screws on the outside of the right armrest with a cross-tip
screwdriver, position the holder and mount it with the
same 3 screws. Put the remote control in the bracket.
Step 10
Pick up the backrest overlay. The side on which you can
see two small cables is the top end. Connect these 2
cables with the same-coloured cables on the back frame
of the massage chair and please make sure that the trans-
parent plastic spouts fully cover the joints.
Step 11
Place the neck cushion over the backrest overlay.
Step 12
Connect the power cable with the main switch box on the
chair and plug it into a wall socket. Check again to ensure
all steps are complete – your chair is now ready for use.
Setup Instructions
Step 9
Mount the remote control holder with the
3 pre-attached screws.
10
Inhaltsverzeichnis
Andere BrainLight Massagegerät Handbücher
