Brandt BPG6308 Series Kurzanleitung
GUIDE FOR INSTALLATION AND USE EN
Cooking hob
BPG6308*
Dear Customer,
You have just acquired a BRANDT product and we would like to
thank you.
We have designed and made this product with you, your lifestyle and
your requirements in mind so that it meets your expectations. We
have devoted our know-how, our innovative spirit and the passion
that has been guiding us for over 60 years.
In an effort to ensure that our products meet your requirements
in the best possible way, our Customer Relations department is at
your disposal, to answer all your questions and to listen to all your
suggestions.
Visit our website www.brandt.com where you will find our latest
innovations, as well as useful and complementary information.
BRANDT is delighted to assist you every day and hopes you get the
most out of your purchase.
Important: Before using your appliance, read this user guide
carefully to familiarise yourself more quickly with its operation.
3
TABLE OF CONTENTS
In the manual :
Display safety instruction
Display tips and hints
YOUR HOB IS DELIVERED PRE SET FOR USE WITH TOWN GAS 10 mbar
SAFETY INSTRUCTIONS....................................................................3
1 / DESCRIPTION OF YOUR APPLIANCE .........................................7
2 / INSTALLING YOUR APPLIANCE
• Choice of location..........................................................................8
• Fitting ...........................................................................................8
• Fitting tips .....................................................................................9
• Case of flush fitting above a drawer, of a cabinet with a door
or drawer ......................................................................................9
• Electric connection .....................................................................10
• Gas connection ..........................................................................11
Town gas connection................................................................ 11
Markings on the injectors .........................................................12
Gas rating.................................................................................12
• Changing the type of gas ............................................................13
Switching from town gas to LPG gas .......................................13
Markings on the injectors .........................................................15
Gas rating.................................................................................15
3 / USING YOUR APPLIANCE
• Description of the worktop...........................................................16
• Switiching on the gas burners .....................................................16
• Cookware to be used with gas burners .......................................18
4 / DAILY CARE OF YOUR APPLIANCE
• Maintaining your appliance..........................................................19
5 / SPECIAL MESSAGES, INCIDENTS.............................................20
6 / SOME TIPS...................................................................................21
7 /
ENVIRONMENT
..............................................................................23
8 / AFTER SALES SERVICE .............................................................24
4
IMPORTANT SAFETY INSTRUCTIONS – READ CAREFULLY
AND RETAIN FOR FUTURE USE.
This guide can be downloaded from the brand web site.
• WARNING : this appliance may be used by children aged 8 years
and older, and by persons with impaired physical sensorial or
mental capacities, or without experience or knowledge, if they are
supervised or have received prior instructions on how to use the
appliance safely and have understood the risks involved.
• Children must not be allowed to play with the appliance.
• Cleaning and maintenance operations must not be carried out by
children without supervision.
• Children must be supervised to ensure that they do not play with
the appliance.
• It must be possible to disconnect the appliance from the power
supply, either using a plug or by fitting a switch on the fixed wiring
system in accordance with installation rules. The protective wire
(green-yellow) must be connected to the plug’s earth terminal or the
installation’s earth terminal.
• Do not use steam cleaning appliances.
• The electrical plug must remain accessible after installation.
• The appliance is not designed to be switched on using an external
timer or a separate remote control system.
• WARNING : leaving a hob unattended when cooking with fat or oil
can be dangerous and could cause a fire.
• Never try to extinguish a fire with water but switch off the appliance,
then cover the flame with a lid or a fire blanket.
• WARNING : fire risk: do not store any items on the cooking surfaces.
• Prior to installation, ensure that the local distribution conditions
(type of gas and gas pressure) and the appliance’s settings are
compatible.
• The conditions for setting this appliance are described on the rating
plate or on label stuck on the appliance.
SAFETY INSTRUCTIONS
5
• This appliance is not connected to a system for evacuating
combustion products. It must be installed and connected in compliance
with current regulations. Particular attention should be given to
applicable ventilation requirements.
• The use of a gas hob produces both heat and humidity in a room.
Ensure that the kitchen is well ventilated: keep mechanical ventilators
open. Prolonged, intensive use of the hob may require additional
ventilation, by opening a window, for example, or ventilating the room
more efficiently by increasing the setting on mechanical ventilation,
where installed.
• Do not use cookware that overhangs the edge of the hob.
• WARNING: the cooking process must be monitored. A short cooking
process must be continuously monitored.
• Use only hob guards designed by the manufactrer of the cooking
appliance or indicated by the manufactrer of the appliance in the
instructions for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause accidents.
• WARNING We do not recommend using any hob protection
mechanism.
• If the power cable is damaged, it should be replaced by the
manufacturer, its after-sales service department or by a similarly
qualified person in order to avoid danger.
• WARNING : In case of hotplate glass breakage :
- shut immediately off all burners and any electrical heating element
and isolate the appliance from the power supply.
- do not touch the appliance surface,
- do not use the appliance.
•WARNING: If a crack appears in the surface of the glass, disconnect
your appliance from the power supply to avoid electric shock.
• This hob has been designed for use by private persons in their
homes.
SAFETY INSTRUCTIONS
6
• These hobs are designed exclusively for cooking drinks and
foodstuffs and do not contain any asbestos-based component parts.
• Never leave any CLEANING or FLAMMABLE products in the
cupboard beneath your hob (aerosols or other pressurized cans,
papers, recipe books, etc.).
• If you have a drawer underneath the hob, we recommend avoiding
placing objects in it that are temperature sensitive (plastics, paper,
aerosols, etc.).
• Disconnect your hob from both electrical and gas supplies before
carrying out any maintenance operations.
• When connecting electrical appliances to a nearby socket, ensure
that the power supply cable is not in contact with any hot surface on
the appliance.
• For safety reasons, after use, do not forget to close the main gas
valve for mains gas lines or the valve on the top of your butane/
propane gas cylinder.
• The conformity CE mark is applied to this hob.
• This appliance should be installed by a qualified technician /
installer.
• If a knob is difficult to turn, call your installer immediately.
• This hob complies with standard EN 60335-2-6, as it applies to
heat build-up in class 3 appliances and the implications for their
installation (in compliance with standard EN 30-1-1).
• Never use aluminium foil for cooking. Never place products
wrapped in aluminium foil or in aluminium trays on your hob. The
aluminium will melt and permanently damage your appliance.
SAFETY INSTRUCTIONS
7
1 / DESCRIPTION OF YOUR APPLIANCE
•DESCRIPTION OF YOUR HOB
ABurner cover
BBurner head
CInjector
DSpark igniter
EThermocouple
FKnob
GGasket
HTap
Tip
This Guide to Installation and Use is valid for several models. There may
be minor differences in details or fittings between your appliance and the
descriptions provided.
Pan support
Model:
High power hob with
knobs
A
B
C
F
G
H
D
E
8
2 / INSTALLING YOUR APPLIANCE
•CHOICE OF LOCATION
Your appliance should be flush mounted in
the surface of a support cabinet that is a
minimum of 3 cm thick, made of a material
that resists heat or that is covered with
such a material.
So as not to inhibit the movement of
cooking utensils, there should not be to
any obstacle within 30 cm of the hob to the
right or left or back.
If a horizontal divider wall is positioned
under the hob, it should be placed between
10 cm and 15 cm away from the top of the
work surface. Never store aerosol cans or
pressurised containers in any compartment
that may exist under the hob (see chapter
“Safety instructions”).
•FITTING
Before installation of your appliance and to
ensure leaktightness between the drawer
unit and the work surface, make sure that
you glue the seal provided in the plastic bag
(Fig. 02).
— Remove the pan supports, the burner
covers and burner heads; noting their
positions.
— Turn the hob over and carefully place it
on top of the opening in the cabinet so as
not to damage the knobs and spark plugs.
— Glue the foam seal, supplied with the
appliance, to the outside edge of the
49 cm
3 cm mini
10 cm mini
10 cm mini
27 cm
7,5 cm mini
70 cm mini
Fig. 01
Fig. 02
Seal
APPLIANCE
Width Depth Thickness
Standard
cabinet cut-out 27 cm 49 cm depending
on cabinet
Total dimension
above the work
surface
30 cm 51,5 cm 5 cm
Total dimension
below the work
surface
26,3 cm 48 cm 5,1 cm
frame. This seal ensures leaktightness
between the glass and the work surface.
— Place your hob in the opening of the
support unit, carefully centering it in the
cut-out.
— Reposition the pan supports, burner
covers and burner heads.
— Connect the hob’s power cable to your
kitchen’s electricity supply (see section
“Electricity connection”).
— Connect your appliance to the gas supply
(see section “Gas connection”).
Housing
9
2 / INSTALLING YOUR APPLIANCE
Mini
4mm
Mini 40 cm2
Fig. 02
• FITTING TIPS
AMounting holes
Gas hob
Front of
cabinet
Services
space
80 mm
mini
100
mm
mini
Worktop
Fig. 03
— If you wish, you can immobilise the
hobusing the four mounting brackets
delivered with their screws, fixed to the
four corners of the casing. You must
use the holes provided for this purpose,
according to the diagram above (Fig. 01).
— Stop screwing when the mounting
bracket starts to become deformed.
Do not use a screwdriver.
Fig. 01
Underside view of the housing
A
A
A
• CASE OF FLUSH FITTING
ABOVE A DRAWER, OF A
CABINET WITH A DOOR OR
DRAWER
• Above an empty cabinet or a drawer
(Fig. 02).
Fitting your hob above an oven requires the
oven to be fitted low. It is recommended
that the hob not be installed above an oven
if the oven’s ventilation is not frontwards.
Create an air vent in the partition to the
right or left of the oven, of 40 cm2.
Brackets
Screw
Worktop
10
2 / INSTALLING YOUR APPLIANCE
• ELECTRIC CONNECTION
Your hob is supplied with a power cable
(type H05VVF cross-section 1 mm2)
with 3 conductors (including 1 ground:
green/yellow). These conductors must be
connected to the grid via a standardised
CEI 60083 live + ground + neutral electrical
outlet or or an all-pole cut-off device
with a minimum distance between contact
openings of 3.5 mm.
The plug of the electrical outlet must be
accessible after installation.
Warning:
If the power cable is damaged,
it must be replaced by a cable or
a special kit available from the
manufacturer or its After-Sales
Service Department.
Neutral
(N)
Live
(L)
Earth
Blue wire
Cable type:
H05V2V2F Black, brown or
red wire
Green and
yellow wire
Cross-section of cable to be used
220-240 V˜- 50 HZ
H05V2V2F cable - T90 3 conductors including
1 ground
Cross-section of
conductors in mm21
Fuse 10 A
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Brandt Kochfeld Handbücher
Brandt
Brandt BPV6210B Bedienungsanleitung
Brandt
Brandt TI302BS1 Bedienungsanleitung
Brandt
Brandt TG1089XC Bedienungsanleitung
Brandt
Brandt TI200 Bedienungsanleitung
Brandt
Brandt TE670 Series Kurzanleitung
Brandt
Brandt TI1033B Bedienungsanleitung
Brandt
Brandt TG2232BBL Bedienungsanleitung
Brandt
Brandt TE576XS1 Bedienungsanleitung
Brandt
Brandt BP411XU1 Bedienungsanleitung
Brandt
Brandt TI616 Kurzanleitung
Brandt
Brandt BPI1641PB Bedienungsanleitung
Brandt
Brandt BPI184HUB Bedienungsanleitung
Brandt
Brandt BPV1641B-01 Bedienungsanleitung
Brandt
Brandt TV1021 Kurzanleitung
Brandt
Brandt IB 61 Technisches Handbuch
Brandt
Brandt BPI 6420 X Bedienungsanleitung
Brandt
Brandt TE217FS1 Einrichtungshandbuch
Brandt
Brandt BPE6410 Series Kurzanleitung
Brandt
Brandt TV 1024 Bedienungsanleitung
Brandt
Brandt TG2232BEL Technisches Datenblatt
