Bremont JAGUAR D-TYPE LIMITED EDITION Technisches Datenblatt
BREMONT JAGUAR D-TYPE LIMITED EDITION
TECHNICAL NOTES
TECHNICAL NOTES
Bremont Watch Company would
like to congratulate you most
sincerely on your purchase of a
Bremont timepiece.
Our timepieces have been
developed over several years to
cater for those that demand more
out of their mechanical watch. Our
aim has always been to produce
beautifully engineered timepieces
of exceptional quality that will last
several lifetimes, and ones that feel
particularly special when placed on
the wrist.
GB
BREMONT JAGUAR D-TYPE
LIMITED EDITION
I II III
2
3
6
7
5
4
8
1
9
II
III
10
60 second chronograph counter
Minute hand
Push-button A
30 minute chronograph counter
Push button B
Date indicator
Setting crown (I, II & III)
Second hand
Hour hand
Tachymeter scale
1
2
3
4
5
6
8
7
9
10
USING THE SETTING CROWN (POSITIONS I, II & III)
WATCH FEATURES
I Normal running of watch and hand winding
II Rapid correction of date and 24 hour hand
III Position for setting the time with stop second and correction
of the date at every passing of midnight
Do not use the rapid date change function between 20:00 and
03:00 as this may damage the date change mechanism
CHRONOGRAPH TIMING FUNCTION
Pressure must not be applied to both pushers simultaneously
Push-button A
1. Start | 2. Stop
Crown in position I
Push-button B
3. Reset to zero
CHANGING THE STRAP
REMOVING A STRAP
Use the end of your watch tool
to carefully lever the spring bar
out of the lug.
FITTING A STRAP
Place one end of the spring bar
into the hole in the lug and use
the end of the watch tool to
lever the other end into position.
If you require a strap change for your watch it is advised that you visit
your Authorised Dealer to avoid damage to the case.
BREMONT JAGUAR D-TYPE LIMITED EDITION
AUTOMATIC CHRONOMETER
Your Bremont watch shows you the time in hours, minutes and seconds,
and the date. With the chronograph you can measure up to 30 minutes
in seconds and minutes. The mechanical movement with automatic
winding has a free-swinging rotor that keeps the mainspring wound via
the motion of your wrist. The movement in your BREMONT JAGUAR
D-TYPE has 28 jewels, runs at 28,800 bph and has a 42-hour power reserve
once fully wound. The watch is water resistant to 100m (10ATM) and the
dial is protected by a multi-layered anti-reflective sapphire crystal that is
retained securely in the case.
To ensure that this rather special watch continues to run beautifully for
years to come you must follow a few important operating instructions...
WINDING THE WATCH
Your BREMONT JAGUAR D-TYPE can be wound from crown position
Iby rotating the crown in a clockwise motion. The movement will
automatically start with just a few revolutions of the rotor, however it is
better to wind the movement fully with 30-40 revolutions of the crown.
By doing this you will achieve maximum accuracy and have a power
reserve of 42-hours, even when the watch is not on your wrist.
SETTING THE DATE
You can adjust the date by pulling out the crown to position II. You will
now be able to change the date by rotating the crown clockwise.
Do not change the date between 20:00 and 03:00
SETTING THE TIME
Pull the crown out to position III, this will stop the movement, you can
now position the minute hand exactly. To start the second hand, push the
crown back to position I. When setting the time, it is worth noting that
the date change always takes place at midnight (00:00). If this change has
already taken place at 12:00 noon, you must move the hands forward by 12
hours. Ensure that the crown is pushed back in after setting the watch.
USING THE TACHYMETER FUNCTION
The Tachymeter is used to measure the speed of an object which is
moving at a constant speed, and is read using a combination of the central
chronograph seconds hand and the tachymeter scale, over a maximum
duration of 60 seconds.
Start the timing operation using push button A and stop it again once the
object has covered a distance of 1 mile or 1 kilometre. When stopped the
chronograph hand will point at a numeral on the tachometer scale,
indicating the speed of the object over the defined distance, this can be
read either in mph or km/h depending on the distance covered.
CHRONOMETER TESTING
Your Bremont watch is chronometer tested to ISO 3159 standard and
accompanied by a performance certificate to show that the mechanical
movement has passed all of the rigorous precision tests - a necessity of the
chronometer designation.
Remember to complete and return the registration card to Bremont to
register your watch and validate your warranty.
The chronometer testing, which takes 15 days to complete over several
different temperature ranges and watch positions, means that the average
daily variation rate will be between -4 and +6 seconds. With 86,400 seconds
in a single day, this gives Bremont’s watches an accuracy of 99.998%.
WATCH CARE
Bremont watches are put through extensive testing before they are released
from the workshop - whether it is for time-keeping precision, temperature,
shock and scratch resistance or pressure testing; all of our strict tolerances have
to be met. Although Bremont watches have more than proved their resilience
before they are released from our workshop, we want to ensure that the
Inhaltsverzeichnis
Sprachen:
Andere Bremont Betrachten Handbücher
Bremont
Bremont ARGONAUT Technisches Datenblatt
Bremont
Bremont JAGUAR MKIII Technisches Datenblatt
Bremont
Bremont AIRCO MACH 1 Technisches Datenblatt
Bremont
Bremont AC35 Technisches Datenblatt
Bremont
Bremont HENLEY ROYAL REGATTA SPECIAL EDITION Technisches Datenblatt
Bremont
Bremont SUPERMARINE S500 Technisches Datenblatt
Bremont
Bremont MBIII Technisches Datenblatt
Bremont
Bremont ARROW Technisches Datenblatt
Bremont
Bremont AC-R-TI Technisches Datenblatt
Bremont
Bremont SOLO Technisches Datenblatt
Bremont
Bremont AC-R-II Technisches Datenblatt
Bremont
Bremont ALT1-P2 Technisches Datenblatt
Bremont
Bremont U-2 Technisches Datenblatt
Bremont
Bremont BOEING 247 TI-GMT Technisches Datenblatt
Bremont
Bremont WATERMAN LIMITED EDITION Technisches Datenblatt
Bremont
Bremont SOLO-32 Technisches Datenblatt
Bremont
Bremont BOEING 1 TI-GMT Technisches Datenblatt
Bremont
Bremont SOLO-34 Technisches Datenblatt
Bremont
Bremont ALT1-ZT Technisches Datenblatt
Bremont
Bremont AC I 32 Technisches Datenblatt
