Bremont SOLO-34 Technisches Datenblatt

SOLO-34

TECHNICAL NOTES

SOLO-34

TECHNICAL NOTES

Bremont Watch Company would

like to congratulate you most

sincerely on your purchase of a

Bremont timepiece.

Our timepieces have been

developed over several years to

cater for those that demand more

out of their mechanical watch. Our

aim has always been to produce

beautifully engineered timepieces

of exceptional quality that will last

several lifetimes, and ones that feel

particularly special when placed on

the wrist.

I II III

Minute hand

Date indicator

Setting crown (I, II & III)

Second hand

Hour hand

CROWN: THREE POSITIONS

WATCH FEATURES

I Normal running of watch and hand winding

II Rapid correction of date

III Position for setting the time with stop second and correction of the

date at every passing of midnight

CHANGING THE STRAP

REMOVING A STRAP

Use the end of your watch tool

to carefully remove the spring bar

out of the case lug. Pressure should

be applied to the side of the strap

to reveal the spring bar, allowing

access for the pronged end of

the tool to sit over the flange of

the spring bar. Carefully depress

the spring bar to allow it to be

removed from the case lug.

FITTING A STRAP

Place the end of the spring bar into

one hole of the case lug and use the

end of the watch tool to depress

the spring bar allowing the other

end to locate into the opposite

hole. Slowly release and ensure that

the spring bar locates correctly into

the hole of the case lug.

SOLO-34

AUTOMATIC CHRONOMETER

Your Bremont watch shows you the time in hours, minutes and seconds,

and the date. The mechanical movement with automatic winding has a

free-swinging rotor that keeps the mainspring wound via the motion of

your wrist. The movement in your SOLO-34 has 25 jewels, runs at 28,800

bph and has a 42-hour power reserve once fully wound. The watch is water

resistant to 100m (10ATM) and the dial is protected by a multi-layered anti-

reflective sapphire crystal that is retained securely in the case.

To ensure that this rather special watch continues to run beautifully for

years to come you must follow a few important operating instructions...

SCREW-DOWN CROWN

Your SOLO-34 is fitted with a screw-down crown. To wind or to adjust

your watch this crown must be unscrewed in an anti-clockwise direction.

When turned in this direction the crown will move out to position I

automatically and allow you to wind the watch. Pulling the crown out

further will allow different operations to be performed as detailed

overleaf. When finished winding or adjusting the watch please ensure that

the crown is screwed back in by gently pushing and turning in a clockwise

direction until the crown comes to a stop.

WINDING THE WATCH

Your SOLO-34 can be wound from crown position I by rotating the crown

in a clockwise direction. Although the movement will automatically start

with just a few revolutions of the rotor, it is better to wind the movement

fully with 30-40 revolutions of the crown. By doing this you will achieve

maximum accuracy and have a power reserve of 42-hours, even when the

watch is not on your wrist.

SETTING THE DATE

You can adjust the date by pulling out the crown to position II. You will

now be able to change the date by rotating the crown clockwise.

SETTING THE TIME

Pull the crown out to position III, this will stop the movement, you can

now position the minute hand exactly. To start the second hand, push

the crown back to position I. When setting the time, it is worth noting

that the date change always takes place at midnight (00:00). If this

change has already taken place at 12:00 noon, you must move the hands

forward by 12 hours. Always ensure that the crown is screwed back in

after setting the watch.

CHRONOMETER TESTING

Your Bremont watch is chronometer tested to ISO 3159 standard and

accompanied by a performance certificate to show that the mechanical

movement has passed all of the rigorous precision tests - a necessity of the

chronometer designation.

Important Notice: Remember to complete and return the registration

card to Bremont, registering your watch and to validate your warranty.

The chronometer testing, which takes 15 days to complete over several

different temperature ranges and watch positions, means that the average

daily variation rate will be between -4 and +6 seconds. With 86,400 seconds

in a single day, this gives Bremont’s watches an accuracy of 99.998%.

WATCH CARE

Bremont watches are put through extensive testing before they are released

from the workshop - whether it is for time-keeping precision, temperature,

shock and scratch resistance or pressure testing; all of our strict tolerances have

to be met. Although Bremont watches have more than proved their resilience

before they are released from our workshop, we want to ensure that the

enjoyment that comes from wearing a Bremont timepiece lasts generations. We

therefore recommend that the following tips for watch care are observed...

CLEANING

Use warm water followed by a microfibre cloth to clean metal and sapphire.

CROWN

Ensure that the crown is pushed in to prevent entry of water into the

mechanism.

SEA WATER

Wash with fresh water following exposure to saline water.

SHOCKS AND JOLTS

Avoid any heavy shocks to the watch.

MAGNETIC FIELDS

Avoid contact with electrical equipment and strong magnets such as

speakers, magnetic tablet case covers and radio alarm clocks.

TEMPERATURE

Keeping the watch in contact with wrist will help minimise any exposure

to extremes. Bremont recommend that you do not wear your watch near

hot water, for example in the shower, steam room or jacuzzi. Extreme

changes in temperature can cause moisture to permeate the seals and

cause condensation to form inside of the watch.

Inhaltsverzeichnis

Sprachen:

Andere Bremont Betrachten Handbücher

Bremont

Bremont JAGUAR D-TYPE LIMITED EDITION Technisches Datenblatt

Bremont

Bremont BROADSWORD Technisches Datenblatt

Bremont

Bremont REGATTA AC Technisches Datenblatt

Bremont

Bremont MBIII Technisches Datenblatt

Bremont

Bremont AC35 Technisches Datenblatt

Bremont

Bremont JAGUAR MKIII Technisches Datenblatt

Bremont

Bremont ARGONAUT Technisches Datenblatt

Bremont

Bremont ALT1-P2 Technisches Datenblatt

Bremont

Bremont AC I 32 Technisches Datenblatt

Bremont

Bremont AC-TI-GMT Technisches Datenblatt

Bremont

Bremont AC I Technisches Datenblatt

Bremont

Bremont BOEING 247 TI-GMT Technisches Datenblatt

Bremont

Bremont SUPERMARINE S300 Technisches Datenblatt

Bremont

Bremont SUPERMARINE S500 Technisches Datenblatt

Bremont

Bremont JAGUAR MKI Technisches Datenblatt

Bremont

Bremont TERRA NOVA LIMITED EDITION Technisches Datenblatt

Bremont

Bremont HENLEY ROYAL REGATTA SPECIAL EDITION Technisches Datenblatt

Bremont

Bremont SOLO-32 Technisches Datenblatt

Bremont

Bremont NORTON V4 Technisches Datenblatt

Bremont

Bremont AC II Technisches Datenblatt

Bremont

Bremont AIRCO MACH 1 Technisches Datenblatt

Bremont

Bremont ALT1-C Technisches Datenblatt

Bremont

Bremont BOEING 1 TI-GMT Technisches Datenblatt

Bremont

Bremont SOLO Technisches Datenblatt

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung