Breo iDream1260 Bedienungsanleitung
USER
MANUAL
iDream1260
EYE & HEAD MASSAGER
OBM Distribution / Breo-USA
5678 East Concours Avenue
Ontario, California 91764
http://www.breo-usa.com
Thank you for purchasing
BREO iDream1260.
Please read this manual carefully before using
the product, and keep it in a safe place for future
reference.
Introduction
Inside the Package
Function Deployment
Operation
Precautions
Troubleshooting
3
3
4
6
Preparation 5
7 -- 8
9
Contents
2
Technical Parameters 9
3
Inside the Package
The package includes: Main Unit, Controller, AC Adapter, Batteries, User
Manual, Earphones.
Introduction
iDream1260 adopts air pressure, vibration, and hot compress massaging
technology to massage the head and ocular regions. It allows you to enjoy
wonderful music while massaging, further relaxing your brain.
Adapter
Controller
Main Unit
Batteries AA Manual Earphones
EYE&
Function Deployment
4
Main Unit
[A] Size Adjusting Knob
[B] Hindbrain massage head
[D] See-through visor
Controller
[C] Front and Back Adjusting Knob
[A] On/Off, Mode Button
[B] LCD Screen (Clockwise: Music / Vibration /
Heat / Air Pressure / Time)
[D] Earphone Jack
[C] Operating Buttons (Clockwise: Music /
Vibration / Heat / Air Pressure / Time;
Center Button: Mode, ON/OFF)
[E] DC Power Port
[F] Pressure Reduction Valve
5
Preparation
No damage on connection between controller and main unit
Battery power is sufficient
No damage on AC adapter
b.
a.
1 . Batteries
c.
Prior to use, check the integrity of the machine and accessories:
Power Options
a. Open the battery cover on the back of the controller.
b. Install 4 AA batteries in accordance with the positive and negative poles.
c. Close the battery cover. (picture1)
Wear
Use the side dials to adjust the distance between head to estab-
lish the most comfortable fit, and wear main unit. (picture 3a)For
ease and safety, use BOTH hands in adjusting the tightness on
each side as well as in setting the distance above head. (picture
3b)
a. Insert the plug of AC adapter in the controller’s DC port.
b. Connect the other end to AC power socket. (picture2)
2 . AC Adapter
（picture1）
（picture2）
（picture3a）（picture3b）
*Choose power option #1 OR #2.
6
Operation
Manual mode
Tip: When you feel the air pressure is too much and/or uncomfortable, press the
Pressure Reduction Valve on the controller to release air.
Preset default is air pressure + high-temperature hot compress +
circulating vibration + relaxing music, 15 minutes duration.
Manually operate related function buttons to switch among
music, time, vibration, hot compress, and air pressure modes.
(*Sounds of Nature featured: running water, birds chirping, waves,
crickets, water dripping)
Time: Press Button to select massage duration (5 min / 10 min / 15 min)
Music: Press Button to select music type (Relaxing / Nature)
Press and hold Button to STOP the music
Vibration: Press Button to initiate 4 vibration modes (circulates automatically)
Heat: Press Button to select temperature (Low-High)
Air pressure: Press Button to initiate 4 air pressure modes (circulates automatically)
Mode: Press to select from 4 different modes:
Air pressure + Hot compress
Air pressure + Vibration
Hot compress + Vibration
Air pressure + Hot compress + Vibration
Power on - Press and hold Button
Power off - Press and hold Button again.
7
Precautions
Please read this User Manual carefully for correct and safe use of this
massager.
Please read the manual carefully and operate accordingly.
Children under 7 years old cannot use the massager.
This massager should not be used by people who suffer from brain
disease, eye disease, or another physical or mental disorder.
Take off contact lenses / eye glasses before use.
Put on / wear the unit first BEFORE turning the power on.
Do not use while walking or driving.
Keep your eyes closed for a few seconds after use, then open them
slowly.
Keep the massager away from humidity, heat, and/or corrosive gas.
If the massager will not be used for a long time, remove the batteries
to avoid battery leakage.
This massager is designed as a personal care product. It is not for
diagnosis/treatment of any health disorder, nor meant for commercial
use.
To clean, wipe with aseptic cotton and alcohol. Do not wash or
immerse in water.
This product is not a substitute for healthcare professionals’ advice
and treatment. In case of doubt or if necessary, please consult your
healthcare professional.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
8
13.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio ommunications. However, there is no
guarantee that interference will not occur in a will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception,which can be determined
by turning the equipment off and on,the user is encouraged to try to
correct the interference by one or more of the following measures:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
14.
Troubleshooting &
Technical Parameters
When operational problems occur, please refer to the chart below.
Do not disassemble the machine or try to repair it by yourself.
Technical Parameters
ProblemPossible Reason Possible Solution
Power-ON failure
Cable is broken / in bad
condition
Check the condition of the cable
Batteries are low / out
Change batteries
Batteries are not installed
correctly
Check if positive/negative poles of batteries
are positioned right
Make sure the batteries are snug in place
AC adapter is not connected
properly
Check the connection of the AC adapter to
the power socket .
Weak heat or air
pressure
Batteries are low / outChange batteries
Make sure the batteries are installed
correctly and snug in place
9
Ideal environment
Temperature: 5°C-40°C
Relative Humidity：≤80%
Atmospheric Pressure: 860hpa～1060hpa
Dimension
Main Unit：232mm × 278mm × 243mm
Controller：141 mm × 68mm × 44mm
Net Weight: 880g
Power: 6W, DC 6V
Inhaltsverzeichnis
Andere Breo Massagegerät Handbücher
Breo
Breo FM D191 Bedienungsanleitung
Breo
Breo NP1 air Bedienungsanleitung
Breo
Breo iSeeM Gebrauchsanweisung
Breo
Breo iPalm520S Bedienungsanleitung
Breo
Breo iDream3S Bedienungsanleitung
Breo
Breo iDream3 Bedienungsanleitung
Breo
Breo Scalp Mini Pro Bedienungsanleitung
Breo
Breo iSee370 Bedienungsanleitung
Breo
Breo iPalm520 Bedienungsanleitung
Breo
Breo i Neck air 2 Bedienungsanleitung
Breo
Breo iNeck Bedienungsanleitung
Breo
Breo i Neck air 2 Bedienungsanleitung
Breo
Breo iSee360 Bedienungsanleitung
Breo
Breo iSee M Bedienungsanleitung
Breo
Breo iDream 5 Bedienungsanleitung
Breo
Breo iScalp Bedienungsanleitung
Breo
Breo N1 Bedienungsanleitung
Breo
Breo Acupoint mini Sport-M0210 Bedienungsanleitung
Breo
Breo iDream1168 Bedienungsanleitung
Breo
Breo 15193130 Bedienungsanleitung
