Broan HRV100H Bedienungsanleitung

User Manual

VENTILATION SYSTEMS

VB0065

vänEE Canadian Model Numbers

1001 ERV

1001 HRV*

2001 ERV

2001 HRV*

Broan U.S.A. Model Numbers

HRV100H

HRV200H

ERV100HC

ERV200HC

* These products earned the ENERGY STAR® by meeting strict

energy efficiency guidelines set by Natural Resources Canada

and the US EPA. They meet ENERGY STAR requirements only

when used in Canada.

03118 rev. 08

Address of your installer

To register your Broan product on line visit: www.broan.com/register

The purpose of this manual is to help you with the use of your unit. Section 2 (How to

Operate the Unit Using Controls) shows you how you can operate the unit in no time.

Section 3 deals with maintenance and explains how to maintain the unit to ensure maximum

operation and performance. In the other sections, for example Troubleshooting, you will

learn how to solve minor problems (Section 4); plus other important information which we

urge you to read.

Several models are described in this publication. Some details of your unit may be slightly

different than the ones shown, as the illustrations are typical ones.

We welcome any suggestions you may have concerning this manual and/or the unit, and we

would appreciate hearing your comments on ways to better serve you. Please forward all

correspondence to us at the address indicated on the warranty text included with this manual.

This manual uses the following symbols to emphasize particular information:

NOTE: Indicates supplementary information needed to fully complete an instruction.

Finally, we want to congratulate you on your purchase of this excellent unit which will allow

you and your family to enjoy fresh air throughout your home for years to come!

ABOUT THIS MANUAL/PRODUCT

CAUTION

Some activities create dust or vapors which may damage your unit. You

must therefore turn off and unplug your unit in the following situations:

• major renovation work

• housing construction

• sanding (e.g. gypsum joints, etc.)

• varnishing

During very heavy snowstorms, the unit should also be turned off to avoid

problems caused by snow entering the unit, even if the installation is

equipped with an anti-gust intake hood.

WARNING

Identifies an instruction which, if not followed, might cause serious

personal injuries including possibility of death.

CAUTION

Denotes an instruction which, if not followed, may severely damage the

unit and/or its components.

REPLACEMENT PARTS AND REPAIRS

In order to ensure your ventilation unit remains in good working condition, you must use

the manufacturer genuine replacement parts only.The manufacturer genuine replacement

parts are specially designed for each unit and are manufactured to comply with all the

applicable certification standards and maintain a high standard of safety. Any third party

replacement part used may cause serious damage and drastically reduce the perform-

ance level of your unit, which will result in premature failing. Also, the manufacturer

recommends to contact a certified service depot for all replacement parts and repairs.

1.YOUR UNIT AND ITS PURPOSE .......................................................4-6

1.1 Unit Description........................................................................................4

1.2 Purpose of the Ventilation System...........................................................4

1.3 Recovery..................................................................................................5

1.4 Defrosting.................................................................................................6

1.5 Specifications...........................................................................................6

2.HOW TO OPERATE THE UNIT USING CONTROLS...............................7-18

2.1 Instructions Regarding your Control Devices .......................................7-8

2.2 Using the Platinum Main Control........................................................9-11

2.3 Using the Deco-Touch Main Control.................................................12-14

2.4 Using the VT1W Main Control ...............................................................15

2.5 Using the VT2W Main Control ..........................................................16-17

2.6 Using the Dehumidistat Main Control ....................................................17

2.7 Using the 3-Position Switch ...................................................................17

2.8 Using the Optional Controls...................................................................18

3.MAINTENANCE.........................................................................19-21

3.1 Every Three Months .........................................................................19-20

3.2 Annual Maintenance (Fall)................................................................20-21

4.TROUBLESHOOTING .......................................................................22

TABLE OF CONTENTS

1.1 UNIT DESCRIPTION

1. YOUR UNIT AND ITS PURPOSE

Your ventilation system is designed to provide fresh air, warmed outdoor air to your home

while exhausting stale, humid air from your home. By eliminating accumulated pollutants

and humidity, it maintains an optimum air quality and an ideal relative humidity.

1.2 PURPOSE OF THE VENTILATION SYSTEM

VH0025

NOTES: 1. Shown with a forced air system. Can also operate on its own.

2. Installation may vary.

VL0017

1. Power supply cord

2. Filters

3. Recovery core

4. Condensation tray

5. Blower assembly

• Units equipped with a heat and humidity recovery core (enthalpic core) can reduce

ventilation costs in winter as well as in summer.

1. During the heating season, the unit draws the humidity and heat from the stale air and

transfers them, in part, to the cold air entering the house, thus avoiding dryness

problems and providing maximum comfort.

Example (in winter):

1.3 RECOVERY

• Units equipped with a heat recovery core (polypropylene core) are specifically

designed to control excess humidity and reduce ventilation costs by recovering the

heat energy from the exhausted air, and using that same heat energy to warm the fresh

air being supplied. This heat recovery process is accomplished in such a way that the

stale air is never mixed with the fresh air.

Example (in winter):

OUTSIDEINSIDE

STALE AIR TO OUTSIDE

4°C/40°F

FRESH AIR TO BUILDING

18°C/64°F

FRESH AIR FROM OUTSIDE

0°C/32°F

STALE AIR FROM BUILDING

22°C/72°F

VF0011

2. During the cooling season, the unit reverses the process, preventing the humidity from

the outside air from entering into the house.

Example (in summer with air conditioning):

OUTSIDEINSIDE

VF0027

STALE AIR TO OUTSIDE

4°C/40°F

FRESH AIR TO

BUILDING 18°C/64°F

FRESH AIR FROM OUTSIDE

0°C/32°F

STALE AIR FROM BUILDING

22°C/72°F

OUTSIDEINSIDE

VF0028

STALE AIR TO

OUTSIDE 30°C/86°F

FRESH AIR TO

BUILDING 27°C/80°F

FRESH AIR FROM OUTSIDE

32°C/90°F

STALE AIR FROM BUILDING

25°C/77°F

When the outside temperature is below 0°C (32°F), recovery (of heat or energy) creates

frost in the core. To maintain its proper operation, the unit is programmed to defrost the

recovery core. The defrost frequency varies according to the outside temperature.

Defrosting lasts 6 minutes. During the defrost cycle, the unit shifts to maximum speed and

the dampers close.

After defrosting, the unit returns to the operating mode selected by the user.

1.4 DEFROSTING

1.5 SPECIFICATIONS

Model 1001 ERV, 1001 HRV, HRV100H, ERV100HC

Width 30¼” (768 mm)

Height 20” (508 mm)

Depth 13¾” (349 mm)

Weight 65 lb (30 kg)

Electrical Supply 120 V, 60 Hz

Power Consumption 150 watts

Model 2001 ERV, 2001 HRV, HRV200H, ERV200HC

Width 30¼” (768 mm)

Height 20” (508 mm)

Depth 19” (483 mm)

Weight 73 lb (33 kg)

Electrical Supply 120 V, 60 Hz

Power Consumption 225 watts

2.1 INSTRUCTIONS REGARDING YOUR CONTROL DEVICES

Refer below and on the following page to identify which controls are installed in your house.

Then, go to the pages indicated to learn how to CONTROL your unit.

MAIN CONTROLS

VT1W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 15

Platinum . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 9-11

Deco-Touch . . . . . . . . . . . . . . . . . . . . . .Pages 12-14

VT2W . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 16-17

2. HOW TO OPERATE THE UNIT USING CONTROLS

VC0104

SMART

SET

MODE

PREF

CONDENSATION CONTROL

AIR SUPPLY CONTROL

MIN.

MAX.

OFF

AIR

EXCHANGE

-20°C

-4°F

-5°C

23°F

5°C

41°F

VC0027

-20°C

-4°F

-5°C

23°F

5°C

41°F

CONDENSATION CONTROL

AIR SUPPLY CONTROL

CONDENSATION CONTROL

MAXIMUM SPEED

AIR EXCHANGE IN PROGRESS

MIN. MAX.

CONTINUOUS INTERMITTENT

20 MIN.

40 MIN.

OFF

VC0028

VC0117

2.1 INSTRUCTIONS REGARDING YOUR CONTROL DEVICES (CONT’D)

OPTIONAL CONTROLS

20-minute push-button timer . . . . . . . . . . . . . . . . .Page 18

VC0030

20/40/60-minute push-button timer . . . . . . . . . . . .Page 18

60-minute crank timer . . . . . . . . . . . . . . . . . . . . . .Page 18

VC0046

20 min.

40 min.

60 min.

OFF

Turn

Past

VC0017

MINUTES

HOLD

MAIN CONTROLS (CONT’D)

3-Position Switch . . . . . . . . . . . . . . . . . . . . . .Page 17

VENTILATION

REMOTE

ARRÊT

LOWSPEED

BASSEVITESSE

HIGH SPEED

HAUTEVITESSE

VC0072

Dehumidistat . . . . . . . . . . . . . . . . . . . . . . . . . .Page 17

DI T

70%

60%

50%

40%

30%

25%

20%

HUMIDITY

CONTROL

DURING FALL, WINTER

AND SPRING, SET THE

DIAL ACCORDING TO

THE DESIRED MAXIMUM

INDOOR HUMIDITY LEVEL.

DURING SUMMER SET

THE DIAL TOTHE

OFF POSITION.

VC0071

2.2 USING THE PLATINUM MAIN CONTROL

VC0099

8 9

SMART Mode. Entirely automatic mode

optimizing the ventilation.

Temperature Indicators.

Program Mode. Allows to program the

desired ventilation according to the period

of the day.

Recirculation Mode. Manual mode

performing air recirculation inside the

house.

Ventilation Mode. Manual mode performing

air exchange with the outside.

Animated Arrows showing ventilation

status (recirculation or air exchange).

Periods of the day (morning, day,

evening and night).

Week days.

Week-end days.

Hour display.

AM or PM display.

Appears only when setting

backlight preferences.

Ventilation / Recirculation speeds and

programming options.

ON-SCREEN INDICATORS

CASING INDICATORS AND KEYS

SMART

SET

MODE

PREF

VC0100

C B A

ASMART key: Enables and disables the

SMART mode.

BSet key: • Press 3 seconds to access setting

periods for Program mode.

• Confirms the chosen option and

goes to following setting.

CArrow keys: • Adjust ventilation and

recirculation speeds.

• Allows to review the

program’s period.

• Adjust Preference and

Program values.

DMode / Pref key: • Mode: Selects whether

Ventilation, Recirculation

or Program mode.

• Pref: Push 3 seconds to

access Preference settings.

EReset filter keys: Press on Band Dkeys

simultaneously for 5 seconds

to turn off (reset) the filter

maintenance indicator.

FPower indicator: Illuminates when the

control is operating.

GFilter maintenance Perform filters

indicator: maintenance.

(Refer to Section 3

Maintenance).

2.2 USING THE PLATINUM MAIN CONTROL (CONT’D)

SETTING PREFERENCES

Press on MODE / PREF key (D) for 3 seconds.

NOTE: You can exit Preferences setting by pressing on MODE / PREF key (D) for

3 seconds any time in the process, or wait 60 seconds. The modified values will be

kept in memory.

WHAT WILL YOU SEE

If the control will be set for the very first time, the current day will be the first setting to be

made; MON (for Monday) will flash on screen.

If the control was previously set up, when setting preferences, the control returns to the last

preference chosen on previous setting. While setting Preferences, the corresponding setting

value flashes (e.g.: while setting current hour, hour is flashing).

HOW TO PROCEED

For every settings in table below:

• Use to select value.

• Press SET key (B) to confirm the selected preference and go to next setting.

SETTING AVAILABLE VALUE DEFAULT OPTIONS

CURRENT DAY MON/TUE/WED/THU/FRI/SAT/SUN MON

HOUR DISPLAY 12:00 AM OR 24:00 12:00 AM

CURRENT HOUR FROM 0 TO 12 OR 24 12

CURRENT MINUTE FROM 00 TO 59 00

TEMPERATURE UNIT °C OR °F °C

INSIDE TEMPERATURE ON OR OFF ON

DISPLAY

MINIMUM OUTSIDE -40°C TO 0°C -25°C

TEMPERATURE OR OR

FOR AIR EXCHANGE* -40°F TO 32°F -13°F

MAXIMUM OUTSIDE 1°C TO 40°C 27°C

TEMPERATURE OR OR

FOR AIR EXCHANGE* 33°F TO 104°F 81°F

*INPROG OR SMART MODE, THESE LIMIT VALUES ALLOW TO STOP AIR EXCHANGE

WITH THE OUTSIDE.

BACKLIGHT COLOR BLUE OR GREEN BLUE

BACKLIGHT DISPLAY AUTO OR ON AUTO

AUTO: BACKLIGHT ACTIVATED 10 SECONDS WHEN ANY KEY IS PRESSED.

ON: BACKLIGHT ALWAYS ON.

OFF MODE FOR VENTILATION/RECIRCULATION VENT/RECIRC.

INTERMITTENT MODE OR VENTILATION/OFF

AFTER A VENTILATION PERIOD, DETERMINES THE SECOND PART OF THE CYCLE

(RECIRCULATION OR OFF).

PM PM

The Platinum main control is pre-programmed and ready to go. All you have to do is to set

day and time. Then check the settings below and change if needed.

Andere Handbücher für HRV100H

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Broan Lüfter Handbücher

Broan

Broan HRVH100S Bedienungsanleitung

Broan

Broan HD80 Bedienungsanleitung

Broan

Broan NUTONE QTREN Series Bedienungsanleitung

Broan

Broan SMD6 Bedienungsanleitung

Broan

Broan LOSONE SELECT L400L Bedienungsanleitung

Broan

Broan 757SNC Bedienungsanleitung

Broan

Broan Ventilation Fan with Light and Heater 100HFL Bedienungsanleitung

Broan

Broan LOSONE SELECT L2000L Bedienungsanleitung

Broan

Broan ZB80M Bedienungsanleitung

Broan

Broan 744SFL Bedienungsanleitung

Broan

Broan SOLITAIRE Series Bedienungsanleitung

Broan

Broan HRVH100SE Bedienungsanleitung

Broan

Broan QT140E Bedienungsanleitung

Broan

Broan 512M Bedienungsanleitung

Broan

Broan 744 Bedienungsanleitung

Broan

Broan 744SFL Bedienungsanleitung

Broan

Broan QTXE110H Bedienungsanleitung

Broan

Broan 741BR Montageanleitung

Broan

Broan Intelligent Ventilation System SMSCPLR Bedienungsanleitung

Broan

Broan ULTRA-SILENT S80LU Bedienungsanleitung

Broan

Broan 655 Installationsanleitung

Broan

Broan NuTone QTRE080H Bedienungsanleitung

Broan

Broan 670 Bedienungsanleitung

Broan

Broan 510 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung