Brookstone MAX 2 Dual-Node Massager Bedienungsanleitung
MAX®2 Cordless
POWERFUL PERCUSSION MASSAGE
792451_INS_Max2 Cordless
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
1
TABLE OF CONTENTS
Warnings and Cautions ....................................................2
Location of Parts and Controls .............................................6
Massager Operation.......................................................7
Product Care and Maintenance............................................10
Specifications............................................................11
Warranty.................................................................13
2
CAUTION
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the unit’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the unit.
IMPORTANT SAFETY INSTRUCTIONS
All of the safety and operating instructions should be read, adhered to and followed
before the unit is operated.
SAVE THESE INSTRUCTIONS
792451_INS_Max2 Cordless
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
3
DANGER
To reduce the risk of electric shock, burns, fire or injury:
1. Always unplug the product from the electrical outlet immediately after
using and before cleaning.
2. Do not use while bathing or in a shower.
3. Do not place or store product where it can fall or be pulled into a tub
or sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for product that has fallen into water. Unplug it immediately.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Do not leave product unattended when plugged in. Turn off and unplug from
outlet when not in use.
2. Close supervision is necessary when this appliance/product is used
by or near children or mentally disabled individuals.
3. Never operate this product if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
4
792451_INS_Max2 Cordless
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
4. Keep cord away from heated surfaces.
5. Never block the air openings of the product or place it on a surface,
such as a bed or couch, where the air openings may be blocked.
Keep the air openings free of lint and hair.
6. Never use while sleeping.
7. Never drop or insert objects into any openings.
8. Do not operate where aerosol products are being used or where
oxygen is being administered.
9. Do not use on or near eyes or other highly sensitive areas.
10. Do not operate under a blanket or pillow. Excessive heating can occur
and cause fire, electric shock or injury.
11. Do not carry this product by AC Adapter cord or use cord as a handle.
12. Do not use directly on one concentrated area of the body. It is meant to
be used in a continuous motion, constantly changing the massage area.
13. To disconnect, turn all controls to the off position and then remove the
plug from the outlet.
14. Do not perform any servicing on the product.
15. This product is designed for household use only. Do not use outdoors.
16. Use this product only for its intended use as described in this manual.
Do not use attachments not recommended by the manufacturer.
CAUTION
1. Consult your doctor before using this product.
2. Individuals with pacemakers should not use this product.
3. Never leave the product operating or unattended, especially if children
are present.
4. Never use the product on open skin eruptions, swollen or inflamed areas.
5. Do not operate after taking pain killers, sedatives or alcohol.
Consult your doctor if you are under these medications.
6. Do not operate for more than 20 minutes continuously. It is recommended
to turn off the product and allow it to rest (cool) for 40 minutes before
re-using. This will prolong the life of the product.
7. The product is designed as a non-professional massager to soothe tired and
aching muscles. It is not intended to be a substitute for medical attention.
If your ailments and symptoms persist or worsen after use, contact your
doctor immediately.
FOR ADULT USE ONLY. Remove all scarves, neckties, necklaces,
and jewelry before using this massager.
IMPORTANT: Any individual who may be pregnant, has a pacemaker,
suffers from diabetes, phlebitis and/or thrombosis, is at an increased risk
of developing blood clots, or who has pins/screws/artificial joints or other
medical devices implanted in his/her body should consult with a physician
before using a massaging device designed for home use.
5
792451_INS_Max2 Cordless
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
6
LOCATION OF PARTS AND CONTROLS
1. Adapter Jack
2. Handle 1
3. On/Off Button
4. Speed Button
5. Speed/Charging LEDs
6. Programs Button
7. Programs LEDs
8. Handle 2
9. Massaging Nodes (2)
10. AC Adapter
8
7
6
5
4
3
2
1
10
9
7
MASSAGER OPERATION
CHARGING THE MASSAGER
Important! Fully charge the massager for 2 hours before first use.
1. To charge the massager, connect the ADAPTER to the massager and plug it
into a wall outlet.
2. The one through five SPEED LEDs will illuminate sequentially while charging,
and they will all remain illuminated when charging is complete.
3. A completely depleted massager battery will take up to 2 hours to charge.
4. The average run-time for the battery at the highest setting is 3 hours.
5. The SPEED LEDs will flash green when the massager’s battery needs to
be recharged.
Note: You may also use the massager while it is plugged in to the electrical
outlet, however, the massager’s battery will not charge while in use.
TURNING POWER ON AND OFF
1. Press POWER. When the massager is first turned on, all five green SPEED
LED lamps light up, from Speed 1 to Speed 5. The blue Program lamps
(SOOTHING, ENERGIZING and PULSING) light up once sequentially.
The motor then runs at its top speed (Speed 5).
2. Press POWER again to shut off. The motor stops and all SPEED LED
lamps shut off.
Note: The massager will automatically shut off after 20 minutes.
792451_INS_Max2 Cordless
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
8
USING SPEED
Because the massager runs at Speed 5 when it is first powered on, SPEED must
be pressed to change speeds.
• Press SPEED once and the motor turns to the minimum, Speed 1. One green
speed-indicating LED lamp lights up.
• Press SPEED again and the motor turns to Speed 2. Speed 1 and Speed 2
green LED lamps light up.
• Press SPEED again and the motor turns to Speed 3. Speed 1, Speed 2 and
Speed 3 green LED lamps light up.
• Press SPEED again and the motor turns to Speed 4. Speed 1, Speed 2,
Speed 3 and Speed 4 green LED lamps light up.
• Press SPEED again and the motor turns to Speed 5. Speed 1, Speed 2,
Speed 3, Speed 4 and Speed 5 green LED lamps light up.
• Press SPEED again and the motor returns to Speed 1.
Note: Pressing SPEED thereafter will continuously change the speed
sequentially, as described above.
9
USING PROGRAMS
• Press the PROGRAMS button once and PULSING is activated.
The corresponding blue LED lamp lights up. The motor continuously runs
in sequence of Speed 5 and a brief stop. The corresponding Speed 5
green lamp lights up.
• Press the PROGRAMS button again and ENERGIZING is activated.
The corresponding blue LED lamp lights up. The motor continuously runs
in sequence of Speed 1, Speed 2, Speed 3, Speed 4; Speed 1, Speed 2,
Speed 3, Speed 4 and so on. The corresponding green Speed lamps light up.
• Press the PROGRAMS button again and SOOTHING is activated.
The corresponding blue LED lamp lights up. The motor continuously runs in
sequence of Speed 1, Speed 2, Speed 3, Speed 1, Speed 2 and so on.
The corresponding green Speed lamps light up.
Note:
• Pressing PROGRAMS thereafter will continuously change the programs
sequentially, as described above.
• Whenever PROGRAMS is exited by pressing SPEED, the massager
returns to Speed 5 as the default.
Andere Handbücher für MAX 2 Dual-Node Massager
2
Inhaltsverzeichnis
Andere Brookstone Massagegerät Handbücher
Brookstone
Brookstone i-Renew Bedienungsanleitung
Brookstone
Brookstone MAX 2 Dual-Node Massager Bedienungsanleitung
Brookstone
Brookstone Gronk Bedienungsanleitung
Brookstone
Brookstone 318102 Bedienungsanleitung
Brookstone
Brookstone OSIM uDivine S Bedienungsanleitung
Brookstone
Brookstone Shiatsu Bed Lounger Bedienungsanleitung
Brookstone
Brookstone TheraSqueeze II Bedienungsanleitung
Brookstone
Brookstone TheraSqueeze Pro Bedienungsanleitung
Brookstone
Brookstone Stretch Vibration Massager Pro Bedienungsanleitung
Brookstone
Brookstone 313181 Bedienungsanleitung
Brookstone
Brookstone Renew 3D Bedienungsanleitung
Brookstone
Brookstone 321751 Bedienungsanleitung
Brookstone
Brookstone BK-250 Bedienungsanleitung
Brookstone
Brookstone BK-650 Bedienungsanleitung
Brookstone
Brookstone Aqua-Jet Foot Spa Bedienungsanleitung
Brookstone
Brookstone Flex-Point Bedienungsanleitung
Brookstone
Brookstone neck & shoulder sport massager with heat Bedienungsanleitung
Brookstone
Brookstone 699199p Bedienungsanleitung
Brookstone
Brookstone Flex Targeted Massager Bedienungsanleitung
Brookstone
Brookstone I-Need Bedienungsanleitung
