Brother FAX-2890 Betriebsanleitung

Please read this guide before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical

shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner

has failed to follow the instructions set out in this guide.

Read all of the instructions. Save them for later reference.

Symbols and

conventions used in the

documentation 1

The following symbols and conventions are

used throughout the documentation.

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injuries.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

Important indicates a potentially hazardous

situation which, if not avoided, may result in

damage to property or loss of product

functionality.

Follow all warnings and instructions marked

on the product.

Note

The illustrations in this guide show the

FAX-2890.

Product Safety Guide 1

(FAX-2890 / FAX-2990 / MFC-7290)

Prohibition icons indicate actions

that must not be performed.

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

WARNING

CAUTION

Important

Hot Surface icons warn you not to

touch product parts that are hot.

Notes tell you how you should

respond to a situation that may arise

or give tips about how the operation

works with other features.

Bold Bold typeface identifies specific

buttons on the product’s control

panel or on the computer

screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in the Courier New font

identifies messages on the

LCD of the product.

Version 0

CHN-ENG

Compilation and Publication Notice 1

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Choose a safe location for your product 1

Put your product on a flat, level, stable surface that is free from vibration and shocks, such as a

desk. Put the product near a telephone socket and a standard earthed electrical socket. Choose

a location where the temperature remains between 10C and 32.5C and the humidity is between

20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,

moisture or dust. Doing so may create a risk of an electrical shock, electrical short or fire. It may

also damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.

Doing so may create the risk of a short circuit or fire, as water may come into contact with the

product (including condensation caused by heating/air conditioning/ventilation equipment).

DO NOT place the product near chemicals or in a place where chemical spillage could occur. In

particular, organic solvents or liquids may cause the casing and/or cables to melt or dissolve,

risking fire or electrical shock. They may also cause the product to malfunction or become

discoloured.

DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.

These slots and openings are provided for ventilation. Blocking the product’s ventilation could

create a risk of overheating and/or fire.

Instead:

• Keep a gap of at least 100 mm between the ventilation hole and the wall.

• Place the product on a solid surface. DO NOT place the product on a bed, sofa, rug, or other

similar soft surface.

• DO NOT place this product near or over a radiator or heater.

• DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.

CAUTION

Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure

that the product is in a safe location where it cannot be accidentally knocked-over, which could

cause injury to you or others and serious damage to the product. Also ensure that cords are

secured so as not to pose a tripping hazard.

DO NOT connect your product to electrical sockets controlled by wall switches or automatic

timers, or to the same circuit as large appliances, such as an air conditioner, copier, shredder,

etc. that might disrupt the power supply.

DO NOT eat the silica gel pack. Please throw away. If ingested seek medical attention

immediately.

DO NOT place heavy objects on the product. DO NOT place this product on an unstable cart,

stand, or table. The product is heavy and may fall, causing injury to you, and serious damage to

the product. Particularly, if you have children, please make sure the product is located in a safe

position.

Important

• DO NOT put objects on top of the product. Doing so could increase the risk of overheating

should the product malfunction.

• DO NOT place anything in front of the product that will block printed documents or faxes.

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non Brother cordless telephones. Doing so may interfere with the operation of the product’s

electronic components.

• Disruption of power can delete information from the product’s memory.

General precautions 1

WARNING

Plastic bags are used in the packing of your product. To avoid danger of suffocation, keep these

plastic bags away from babies and children. Plastic bags are not toys.

• DO NOT put a toner cartridge or a toner cartridge and drum unit assembly into a fire. It could

explode, resulting in injuries.

• DO NOT use flammable substances near the product. DO NOT use any type of spray to

clean the inside or outside of the product. Doing so may cause a fire or electrical shock. For

instructions on how to clean the product, see Basic User’s Guide/Advanced User’s Guide:

Routine maintenance.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

Unplug this product from the wall socket before cleaning the inside or outside of the product. DO

NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for cleaning.

Avoid using this product during an electrical storm. There may be a remote risk of electrical

shock from lightning.

Be careful not to inhale the toner powder. In the unlikely event that toner is inhaled, please follow

these steps immediately:

• Move to an area with plenty of fresh air.

• Gargle and rinse your mouth out with plenty of water.

• If you develop a cough or any other symptoms brought on by the inhalation of the toner,

please consult your doctor immediately.

If you happen to swallow some toner powder, rinse your mouth and drink plenty of fresh water

to dilute the toner. Then, please consult your doctor immediately.

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait at least 10 minutes for the product to cool down before you touch the internal parts of the

product.

Use caution when modifying telephone lines. Never touch exposed telephone wiring or

terminals unless the telephone line has been unplugged at the wall socket. Never fit telephone

wiring during a lightning storm. Never fit a telephone wall socket in a wet location. Doing this

might cause an electrical shock.

CAUTION

When moving the product, grasp the side handholds firmly from the front of the product.

Important

DO NOT remove or damage any of the caution or warning labels inside the product.

Connecting the product safely 1

WARNING

There are high voltage electrodes inside the product. Before you clean the inside of the product,

make sure you have unplugged the telephone line cord first and then the power cord from the

electrical socket. Doing this will prevent an electrical shock.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted.

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a

qualified electrician.

DO NOT allow anything to rest on the power cord. DO NOT place this product where people

may step on the cord.

To ensure safe operation, the supplied three-pin plug must be inserted only into a standard

three-pin electrical socket that is properly earthed through the standard electrical wiring.

Only use the power cord supplied with this product.

DO NOT place this product in a position where the cord is stretched or where strain is otherwise

put on the cord. Doing so may cause the cord to become worn or frayed.

DO NOT use the product if the power cord is frayed or damaged. Doing so may cause an

electrical shock or a fire.

Brother strongly recommends that you DO NOT use any type of extension cord.

Important Safety Instructions 1

1 This product is equipped with a 3-wire grounding type plug, a plug having two or three pins.

This plug will only fit into only a grounding-type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.

DO NOT defeat the purpose of the grounding-type plug.

2 DO NOT place anything on top of the power cord including this machine. DO NOT allow the

power cord to be stepped on.

3 DO NOT touch a document during printing.

4 Never push objects of any kind into this product through cabinet slots, since they may touch

dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never

spill liquid of any kind on the product.

5 Unplug this product from the wall outlet and refer servicing to Authorized Service Personnel

under the following conditions:

If the power cord is damaged or frayed.

If the product has been spilled by liquid.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions. Incorrect

adjustment of other controls may result in damage and will often require extensive work by

a qualified technician to restore the product to normal operation.

If the product has been dropped or the casing has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.

WARNING

For protection against the risk of electrical shock, always disconnect all cables from the wall

outlet before servicing, modifying or installing the equipment.

Important

• This equipment may not be used on coin service lines provided by the telephone company or

connected to party lines.

• Brother cannot accept any financial or other responsibilities that may be the result of your use

of this information, including direct, special or consequential damages. There are no

warranties extended or granted by this document.

Andere Handbücher für FAX-2890

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Faxgerät Handbücher

Brother

Brother MFC 8500 - B/W Laser - All-in-One Bedienungsanleitung

Brother

Brother FAX-2480C Bedienungsanleitung

Brother

Brother FAX-1820C Sicherheitsleitfaden

Brother

Brother MFC-580 Bedienungsanleitung

Brother

Brother IntelliFax-3550 Bedienungsanleitung

Brother

Brother FAX-T7 Plus Bedienungsanleitung

Brother

Brother FAX-235 Bedienungsanleitung

Brother

Brother FAX-1820C Bedienungsanleitung

Brother

Brother FAX-1010 Bedienungsanleitung

Brother

Brother FAX 2800 - B/W Laser - Fax Bedienungsanleitung

Brother

Brother MFC-7050C Bedienungsanleitung

Brother

Brother T74 Bedienungsanleitung

Brother

Brother MFC-5200C Bedienungsanleitung

Brother

Brother FAX 275 Bedienungsanleitung

Brother

Brother MFC-590 Bedienungsanleitung

Brother

Brother MFC-4820C Bedienungsanleitung

Brother

Brother Laser MFC-4800 Bedienungsanleitung

Brother

Brother FAX-400 Bedienungsanleitung

Brother

Brother IntelliFAX 825MC Bedienungsanleitung

Brother

Brother FAX 560 Bedienungsanleitung

Brother

Brother 8250P - FAX B/W Laser Printer Bedienungsanleitung

Brother

Brother 1270e IntelliFAX Fax Bedienungsanleitung

Brother

Brother FAX-2440C Bedienungsanleitung

Brother

Brother MFC-250C Bedienungsanleitung

Beliebte Faxgerät Handbücher anderer Marken

Samsung

Samsung SF-515 Bedienungsanleitung

Radio Shack

Radio Shack TFX-1031 Bedienungsanleitung

imagistics

imagistics 2030 Handbuch

Panasonic

Panasonic KX-FL501C Bedienungsanleitung

Panasonic

Panasonic KX-FP200L Bedienungsanleitung

Furuno

Furuno FAX-30 Bedienungsanleitung

Savin

Savin 3740 Handbuch

Sharp

Sharp FO-51 Bedienungsanleitung

Muratec

Muratec MFX-C3035 Bedienungsanleitung

Panasonic

Panasonic KX-PD505DL Bedienungsanleitung

Panasonic

Panasonic KX-FC265CX-S Bedienungsanleitung

Canon

Canon FAX-L400 Bedienungsanleitung

Ricoh

Ricoh 1000L Kurzanleitung

Sharp

Sharp FO-3150 Bedienungsanleitung

Kyocera

Kyocera KM-F1060 Bedienungsanleitung

Sharp

Sharp FO-2970M Bedienungsanleitung

Panasonic

Panasonic KX-F850 Bedienungsanleitung

Panasonic

Panasonic KX-FLM652CX Bedienungsanleitung