Brother P-touch PT-9600 Bedienungsanleitung

SERVICE MANUAL

MODEL: PT-9600/3600

SERVICE MANUAL

MODEL: PT-9600/3600

PREFACE

This publication is a service manual covering the specifications, theory of operation,

disassembly/reassembly procedure, and troubleshooting and error message of the Brother PT-

9600/3600. It is intended for service personnel and other concerned persons to accurately and

quickly provide after-sale service for our PT-9600/3600.

To perform appropriate maintenance so that the machine is always in best condition for the

customer, the service personnel must adequately understand and apply this manual.

This manual is made up of four chapters and appendices.

CHAPTER I SPECIFICATIONS

CHAPTER II THEORY OF OPERATION

CHAPTER III DISASSEMBLY AND REASSEMBLY

CHAPTER IV TROUBLESHOOTING AND ERROR MESSAGE

APPENDICES 1. MAIN PCB CIRCUIT DIAGRAMS

2. LCD PCB CIRCUIT DIAGRAMS

No part of this publication may be reproduced in any

form or by any means without permission in writing

from the publisher.

Specifications are subject to change without notice.

CONTENTS

CHAPTER I SPECIFICATIONS......................................................................... I-1

1.1 MECHANICAL SPECIFICATIONS ........................................................................ I-1

1.1.1 External Appearance...................................................................................... I-1

1.1.2 Keyboard........................................................................................................ I-2

1.1.3 Display........................................................................................................... I-2

1.1.4 Printing Mechanism........................................................................................ I-3

1.1.5 Tape Cassette................................................................................................ I-3

1.1.6 Tape Cutter.................................................................................................... I-4

1.1.7 PC Interface................................................................................................... I-4

1.2 ELECTRONICS SPECIFICATIONS ...................................................................... I-10

1.2.1 Character Generator....................................................................................... I-10

1.2.2 Power Supply................................................................................................. I-10

1.3 KEY COMMANDS FOR SPECIAL FUNCTIONS................................................... I-10

1.3.1 Initializing....................................................................................................... I-10

1.3.2 Demonstration Print........................................................................................ I-10

CHAPTER II THEORY OF OPERATION........................................................... II-1

2.1 OUTLINE OF MECHANISMS................................................................................ II-1

2.1.1 Print Mechanism ............................................................................................ II-1

2.1.2 Roller Holder ASSY Setting & Retracting Mechanism..................................... II-3

2.1.3 Tape & Ribbon Feed Mechanism ................................................................... II-4

2.1.4 Tape Automatic Full Cutter Mechanism.......................................................... II-6

2.1.5 Tape Automatic Half Cutter Mechanism......................................................... II-7

2.1.6 Tape Eject Mechanism (Full Cut Only)........................................................... II-8

2.1.7 Release Button............................................................................................... II-9

2.1.8 Roller Holder ASSY & Cassette Cover Interlocking Mechanism...................... II-9

2.1.9 AV Label Print Start Position Detector Mechanism......................................... II-11

2.2 OUTLINE OF ELECTRONICS .............................................................................. II-12

2.2.1 Configuration.................................................................................................. II-12

2.2.2 Main PCB....................................................................................................... II-14

[ 1 ] Block Diagram............................................................................................. II-14

[ 2 ] Solder Ponits............................................................................................... II-16

[ 3 ] Cassette Sensor & AV Cassette Sensor Circuit............................................ II-16

2.2.3 LCD PCB ....................................................................................................... II-18

CHAPTER III DISASSEMBLY AND REASSEMBLY ......................................... III-1

3.1 DISASSEMBLY PROCEDURE ............................................................................. III-2

[ 1 ] Removing the Tape Cassette ...................................................................... III-2

[ 2 ] Disassembling the Cassette Cover ASSY.................................................... III-3

[ 3 ] Removing the Screw from Bottom Cover .................................................... III-4

[ 4 ] Removing the KB Unit/Rubber Key Unit ...................................................... III-5

[ 5 ] Disassembling the KB Unit/Rubber Key Unit................................................ III-6

[ 6 ] Removing the Body Cover .......................................................................... III-10

[ 7 ] Removing the Chassis Unit ......................................................................... III-11

[ 8 ] Disassembling the Chassis Unit................................................................... III-12

[ 9 ] Removing the Main PCB............................................................................. III-23

[ 10 ] Removing the LCD Module Unit.................................................................. III-24

[ 11 ] Removing the Release Button, Tape End Sensor PCB and

Cassette Sensor PCB.................................................................................. III-26

3.2 REASSEMBLY PROCEDURE .............................................................................. III-29

[ 1 ] Reassembling the Cassette Sensor PCB, Tape End Sensor PCB and

Release Button............................................................................................ III-29

[ 2 ] Reassembling the LCD Module Unit............................................................ III-32

[ 3 ] Reassembling the Main PCB....................................................................... III-35

[ 4 ] Reassembling the Components of the Chassis Unit..................................... III-36

[ 5 ] Installing the Chassis Unit ........................................................................... III-47

[ 6 ] Reassembling the Body Cover .................................................................... III-49

[ 7 ] Reassembling the KB Unit/Rubber Key Unit................................................ III-50

[ 8 ] Installing the KB Unit/Rubber Key Unit ........................................................ III-54

[ 9 ] Reassembling the Bottom Cover................................................................. III-55

[ 10 ] Reassembling the Cassette Cover ASSY .................................................... III-56

[ 11 ] Reassembling the Tape Cassette................................................................ III-58

[ 12 ] Final Check................................................................................................. III-59

iii

CHAPTER IV TROUBLESHOOTING AND ERROR MESSAGE....................... IV-1

4.1 OVERVIEW .......................................................................................................... IV-1

4.2 TROUBLESHOOTING GUIDE.............................................................................. IV-1

4.3 ERROR MESSAGE .............................................................................................. IV-2

4.4 TROUBLESHOOTING FLOWS ............................................................................ IV-40

[ 1 ] Printing is performed with specific dots omitted........................................... IV-40

[ 2 ] The tape cassette type is not detected correctly .......................................... IV-41

[ 3 ] No printing is performed.............................................................................. IV-42

[ 4 ] The interface malfunctions (RS-232C)......................................................... IV-42

[ 5 ] The Interface malfunctions (USB)................................................................ IV-43

[ 6 ] The tape is not fed correctly ........................................................................ IV-44

[ 7 ] The tape is not cut....................................................................................... IV-46

[ 8 ] Half cut failure............................................................................................. IV-47

[ 9 ] Forced tape eject failure.............................................................................. IV-48

Appendix 1. MAIN PCB CIRCUIT DIAGRAM

Appendix 2. LCD PCB CIRCUIT DIAGRAM

I-1

CHAPTER ISPECIFICATIONS

1.1 MECHANICAL SPECIFICATIONS

1.1.1 External Appearance

Fig. 1.1-1 External Appearance (1)

PT-9600 (Europe)

PT-9600/3600 (U.S.A./CANADA)

I-2

Fig. 1.1-1 External Appearance (2)

[ 1 ] Dimensions(W x D x H) 237 mm x 302 mm x 104 mm

[ 2 ] Weight Machine proper Approx. 1.9kg

Approx. 2.0kg (including a tape cassette)

In package Approx. 4.0kg

1.1.2 Keyboard

[ 1 ] Entry system Rubber key pad (PT-3600 Europe)

Full keyboard (PT-9600/PT-3600 U.S.A.)

[ 2 ] Number of alphanumeric and symbol keys 39

[ 3 ] Number of function keys 27 (PT-9600)

21 (PT-3600 U.S.A.)

19 (PT-3600 Europe)

(excluding “ON/OFF” key, “PRINT” key)

[ 4 ] Key arrangement See Fig. 1.1-2.

1.1.3 Display

[ 1 ] Display type Liquid crystal display (LCD)

(PT-9600 having Back-light)

[ 2 ] Configuration (See Fig.1.1-2.) 119 dots wide by 24 dots high and

guidance

[ 3 ] Number of indicators (See Fig.1.1-2.) : 32

[ 4 ] Field-of-view angle adjustment : Fixed by a resistor.

PT-3600 (Europe)

I-3

1.1.4 Printing Mechanism

[ 1 ] Print method Thermal transfer onto plastic tapes (laminate tape

and non-laminated tape) or special tapes (instant

lettering tape, non-laminated thermal film tape,

iron-on transfer tape, and porous-stamp tape, and

*AV labels tape)

(Fixed print head and tape feeding mechanism)

* AV labels tape : PT-9600/PT-3600 U.S.A. only

[ 2 ] Print speed (max.) 285 dots (20.1 mm) per second

[ 3 ] Print head

Type Thermal print head

Heat generator Consists of 384 heating elements vertically aligned

Size of heating element 0.08 mm wide by 0.0705 mm high

[ 4 ] Character size (dots)

Character size

(Point size) dots Height x Width

(mm) Character size

(Point size) dots Height x Width

(mm)

622 x 17 (1.54 x 1.19) 22 80 x 61 (5.6 x 4.27)

726 x 20 (1.82 x 1.4) 24 88 x 67 (6.16 x 4.69)

829 x 22 (2.03 x 1.54) 28 102 x 79 (7.14 x 5.53)

933 x 25 (2.31 x 1.75) 32 117 x 89 (8.19 x 6.23)

10 37 x 28 (2.59 x 1.96) 36 131 x 101 (9.17 x 7.07)

11 40 x 31 (2.8 x 2.17) 40 146 x 112 (10.22 x 7.84)

12 44 x 34 (3.08 x 2.38) 48 175 x 135 (12.25 x 9.45)

14 51 x 39 (3.57 x 2.73) 56 204 x 157 (14.28 x 10.99)

16 58 x 45 (4.06 x 3.15) 64 234 x 179 (16.38 x 12.53)

18 66 x 50 (4.62 x 3.5) 72 263 x 201 (18.41 x 14.07)

20 73 x 56 (5.11 x 3.92) 76 277 x 213 (19.39 x 14.91)

* Scaling with width settings

WIDE 2

NARROW 2/3

NARROWEST 1/2

1.1.5 Tape Cassette

[ 1 ] Cassette Cartridge type

[ 2 ] Types of tape cassettes

•Laminated tape cassette Laminate tape, ink ribbon, and adhesive base tape

•Non-laminated tape cassette Non-laminated tape and ink ribbon

•Instant lettering tape cassette Instant lettering tape and ink ribbon

•Iron-on transfer tape cassette Iron-on transfer tape and ink ribbon

•Stamp tape cassette Porous-stamp tape and base paper

•Cloth tape cassette Cloth tape and ink ribbon

•AV (Avery) labels cassette AV labels and base paper

Note: The tape cassette for Head cleaning is provided.

* The height and width of printed characters will

differ depending on characters. The values in the

above list apply to character “H” of HELSINKI.

* The character size refers to the point size.

I-4

[ 3 ] Tape size

Type of tape Width Length

Laminate tape 6, 9, 12, 18, 24, 36

mm 8 m (5 m for the

fluorescent coating tape)

Non-laminated tape 6, 9, 12, 18, 24 mm 8 m

Instant lettering tape 12, 18, 24 mm 8 m

Iron-on transfer tape 18 mm 6m

Porous-stamp tape 18, 24 mm 3m

Cloth tape 12, 18 mm 4m

AV address labels tape 24 mm 7m

AV return address labels tape 24 mm 7m

AV file folder labels tape 24 mm 7m

Head cleaning tape 36 mm 2.5 m (Approx. 100 times)

[ 4 ] Tape cassette packed with the machine

PT-9600/PT-3600 (Europe) version Laminated tape cassette (containing a 24-mm-wide

black ink ribbon, laminate tape, and adhesive base

tape)

PT-3600 U.S.A. version Laminated tape cassette (containing a 24-mm-wide

black ink ribbon, laminated tape, and adhesive

base tape) and AV address labels cassette

(containing a24-mm-wide AV labels tape and base

tape)

1.1.6 Tape Cutter

[ 1 ] Tape cutting (1) Automatic full cutter

(2) Automatic half cutter

Not user-replaceable (1) and (2)

1.1.7 PC Interface

[ 1 ] Comunication Interface USB, Serial interface (RS-232C)(PT-9600 only)

[ 2 ] Applicable OSs Microsoft Windows 95

(for the RS-232C I/F of PT-9600 only)

Microsoft Windows 95/98 SE

Microsoft Windows ME

Microsoft Windows NT 4.0

(for the RS-232C I/F of PT-9600 only)

Microsoft Windows 2000 Professional

Microsoft Windows XP

Macintosh Mac OS 8.6 ~ 9.x

Macintosh Mac OS X 10.1/10.2

[ 3 ] Printer emulation Serial I/F (PT-9600 only)

[ 4 ] ASCII, ESC/P N/A (PT-3600 only)

Andere Handbücher für P-touch PT-9600

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Etikettendrucker Handbücher

Brother

Brother P-TOUCH 7500 Bedienungsanleitung

Brother

Brother P-TOUCH PT-1230PC Bedienungsanleitung

Brother

Brother QL-1050 Bedienungsanleitung

Brother

Brother QL 650TD - P-Touch B/W Direct Thermal... Bedienungsanleitung

Brother

Brother P-touch 1400 Bedienungsanleitung

Brother

Brother P-Touch QL-500 Bedienungsanleitung

Brother

Brother P-touch PT-9600 Einrichtungshandbuch

Brother

Brother PT-9500PC - P-Touch 9500pc B/W Thermal Transfer... Bedienungsanleitung

Brother

Brother VC-500W Bedienungsanleitung

Brother

Brother SC-2000 Bedienungsanleitung

Brother

Brother P-Touch PT-E800W Bedienungsanleitung

Brother

Brother P-touch Extra PT-320 Bedienungsanleitung

Brother

Brother P-touch PT-70 Bedienungsanleitung

Brother

Brother PT-65 Handbuch

Brother

Brother PT-E500 Bedienungsanleitung

Brother

Brother P-touch Pro PT-H111 Bedienungsanleitung

Brother

Brother VC-500W Bedienungsanleitung

Brother

Brother P-Touch H107 Bedienungsanleitung

Brother

Brother P-Touch PT-1600 Bedienungsanleitung

Brother

Brother P-touch E800T Bedienungsanleitung

Brother

Brother P-Touch PT-1830 Bedienungsanleitung

Brother

Brother PT-MT (P-touch mini ' tech) Bedienungsanleitung

Brother

Brother QL-710W/720NW Bedienungsanleitung

Brother

Brother PT 1800 - P-Touch 1800 Thermal Transfer... Bedienungsanleitung

Beliebte Etikettendrucker Handbücher anderer Marken

newell

newell Dymo LabelManager 210D Bedienungsanleitung

U-Line

U-Line BROTHER H-8754 Bedienungsanleitung

Tharo Systems

Tharo Systems H-435+ Bedienungsanleitung

Godex

Godex RT700 SERIES Bedienungsanleitung

ID Technology

ID Technology 252 Bedienungsanleitung

Labelmate

Labelmate MC-11 Bedienungsanleitung

CAB

CAB XD4M/300 Bedienungsanleitung

Avery Dennison

Avery Dennison Pathfinder 6057 Service-Handbuch

TSC

TSC PEX1000 Series Bedienungsanleitung

Adkins

Adkins Label Master Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Primera

Primera 510212 Bedienungsanleitung

Brady

Brady BradyPrinter S3100 Bedienungsanleitung

DuraLabel

DuraLabel LabPRO Bedienungsanleitung

Novexx Solutions

Novexx Solutions XLP 604 Bedienungsanleitung

Epson

Epson LabelWorks LW-400 Bedienungsanleitung

Dymo

Dymo LabelManager 420P Bedienungsanleitung

Epson

Epson LW-PX400 Bedienungsanleitung