Brother ScanNCut DX Stamp Starter Kit Bedienungsanleitung

You can cut the stamp sheet with your cutting machine to create original stamps.

●Do not fold or bend the stamp sheet.

●For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

●Do not store stamp sheets or acrylic blocks in an environment exposed to direct sunlight or extremely low or extremely high

temperatures.

●The contents of this document are subject to change without notice.

●The screens in this manual are for illustration purposes only and may differ from the actual screens.

After purchasing this kit, check the contents.

*1 This accessory is consumable. After you have used it all, purchase CASTPS1(stamp sheets). To purchase options, contact the retailer

where this kit was purchased.

Stamp Starter Kit

About Stamp Starter Kit

Precautions

Accessories

ABCD

Name

AStamp sheet*1 5.9" × 7.8" (150 mm × 200 mm) : 3 pieces

B Acrylic block 2.9" × 3.9" (75 mm × 100 mm)

C Activation card for access to 50 stamp patterns

DInsertion

Version 0

CanvasWorkspace has template images that can be used immediately.

aFrom a computer, log in to CanvasWorkspace.

(http://CanvasWorkspace.Brother.com)

• New users should create a free account.

bClick at the top right of the Web page.

cClick <Premium Function Activation>.

dType in the activation code on the included card for

activation code, and then click <Activate>.

• Scratch off the silver part of the card and reveal the activation

code.

• The uppercase letters “I” and “O” are not used in the activation

code.

• The activation code is valid for only one login ID for

CanvasWorkspace. The same activation code cannot be used

again.

eCheck the content on the activation confirmation screen,

and if there are no problems, click <Activate>.

Click <OK>, and the activation is complete.

A pattern category for stamps is added to CanvasWorkspace.

For details on the operations of CanvasWorkspace, click

and refer to <Help>.

Activating the Stamp Patterns on CanvasWorkspace

For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

aRemove clear vinyl backing from one side of the stamp

sheet. Place the stamp sheet with the remaining backing

face up on the standard tack adhesive mat. At that time,

stretch the sheet so that no bubbles remain.

Note

• For best results, place the stamp sheet on the mat with the

clear vinyl backing face up. Backing is not needed

between the mat and stamp sheet.

• Bubbles between the stamp sheet and the backing do not

affect cutting.

bDownload the stamp pattern from CanvasWorkspace.

cRetrieve the pattern on the cutting machine.

dTouch the "Test" key to perform test cut.

Note

• Cut patterns to a size that fits within the acrylic block (3" x

4"(75 mm x 100 mm)).

• Cut patterns at least 5 mm from the edge of the stamp

sheet.

• When arranging multiple patterns, set the number of

“Pattern Interval” to “3” or higher from setting. If their

spacing is too small, the patterns may not be cleanly cut.

eTouch the "Start" key to start test cutting.

• Arrange the test pattern to avoid the stamp pattern.

aAuto Blade Holder (Black)

Retrieving the Stamp Pattern on the Machine

fPeel the stamp sheet off the mat, and then check that the

test pattern has been cut out.

gTouch the "Start" key to start cutting the stamp pattern.

hPeel the backing from the cut-out stamp sheet.

iAfter flipping over the cut-out stamp sheet, place it on the

acrylic block, arranging the pattern with the grid on the

block as a guide.

Note

• When placing characters or non-symmetrical patterns on

the acrylic block, be sure to flip them over before placing

them on the block.

jUsing the ink, color the stamp pattern.

kApply the stamp at the desired location.

Note

• After use, wipe off the ink on the cut-out stamp sheet and

acrylic block with a damp cloth or tissue, and then store

them after they have dried.

• When the leftover stamp sheet is used, it may curl up in the

machine. After cutting out the pattern, use scissors to cut

around the pattern to clean it up.

Andere Brother Nähmaschinenzubehör Handbücher

Brother

Brother sa160 Bedienungsanleitung

Brother

Brother F036N Bedienungsanleitung

Brother

Brother SA179 Bedienungsanleitung

Brother

Brother SA104/F082 Bedienungsanleitung

Brother

Brother SA179 Bedienungsanleitung

Brother

Brother SA204 Bedienungsanleitung

Brother

Brother PRSCLPM1 Bedienungsanleitung

Brother

Brother SA208 Bedienungsanleitung

Brother

Brother ScanNCut DX Embossing Starter Kit Bedienungsanleitung

Brother

Brother ScanNCut DX Printable Sticker Starter Kit Bedienungsanleitung

Brother

Brother Innov-is V7 Bedienungsanleitung

Brother

Brother 888-M50 Bedienungsanleitung

Brother

Brother PRCL1 Bedienungsanleitung

Brother

Brother SA107 Bedienungsanleitung

Brother

Brother ScanNCut DX Foil Transfer Starter Kit Bedienungsanleitung

Brother

Brother S-6200A Bedienungsanleitung

Brother

Brother PR-600/600C Bedienungsanleitung

Brother

Brother PR-620 Bedienungsanleitung

Brother

Brother 4234DT Bedienungsanleitung

Brother

Brother MD-600 Series Bedienungsanleitung

Brother

Brother KIT I Bedienungsanleitung

Brother

Brother ScanNCut DX Embossing Tool Set Bedienungsanleitung

Brother

Brother KIT CW Bedienungsanleitung

Brother

Brother F012N Bedienungsanleitung

Beliebte Nähmaschinenzubehör Handbücher anderer Marken

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SMT-7242 Bedienungsanleitung

Jack

Jack 6040-D Technisches Handbuch

JUKI

JUKI IP-410 Bedienungsanleitung

ZOJE

ZOJE 1900D Bedienungsanleitung

ELNA

ELNA 795-816-116 Bedienungsanleitung

Baby Lock

Baby Lock General Purpose Zig Zag Foot Bedienungsanleitung

ELNA

ELNA 202-248-004 Bedienungsanleitung

Efka

Efka dc 1500 Bedienungsanleitung

Baby Lock

Baby Lock BLQ2-QGF Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MP-G10-AH Bedienungsanleitung

JUKI

JUKI IP-200 Benutzerhandbuch

Sullivans

Sullivans Sew & Go Bedienungsanleitung

Sailrite

Sailrite ULTRAFEED 120931 Bedienungsanleitung

Bernina

Bernina Spanish Hemstitch Equipment 47 Bedienungsanleitung

ELNA

ELNA 495-526-20 Bedienungsanleitung

$TEX ALL IN 1 Sleeve Board Pro Bedienungsanleitung$

TEX

TEX ALL IN 1 Sleeve Board Pro Bedienungsanleitung

JUKI

JUKI IP-420 Bedienungsanleitung

Husqvarna

Husqvarna VIKING Do All Quilters Hoop Bedienungsanleitung