Brother BAS-401 Bedienungsanleitung

Checking the rotary hook for nicks and scratches

If you are having problems with thread breaking or fraying on all the needles on a

particular head, if multi head machine, then you might have a bad presser foot or it needs

the height adjusted. If changing the presser foot and or height does not fix the problem

than the rotary hook might have some nicks or scratches on it. This is one of the most

common problems and should be checked before adjusting the rotary hook timing. Nicks

and scratches on the rotary hook can be caused by needle breaks and or being careless

when you remove a bird’s nest, i.e. using the tweezers to pull and pry the thread out from

underneath the needle plate.

1. Turn the rotary hook, by either turning the pulley in the back on a 1 and 3 head or

rotating it by hand if on a 4 and 6 head, so that you can inspect the thread slide

face for nicks or scratches (see diagram below).

2. Feel along the thread slide face to see if it is smooth, free of scratches and nicks.

If you feel any and they aren’t real deep. You might be able to sand or polish the

area until it is smooth. 600 grit sandpaper works well for this. Anything rougher

will result in a finish that is not smooth enough for the machine to operate without

breaking the thread. Extra fine crocus cloth after the 600-grit sandpaper works

well to polish the surface to chrome like finish just like when it was new. Any real

deep gouge or nick you probably won’t be able to sand out so the only option is to

replace the rotary hook.

3. After checking and repairing the rotary hook it will need to go back to it’s normal

position. This can be done by either turning the pulley in the back on a 1 and 3

head back to 100 degrees or by pressing the back switch on the head on a 4 and 6

head.

A

Al

ll

l

M

Ma

ac

ch

hi

in

ne

es

s

For Technical Assistance Please Call Toll Free 1-877-4BROTHER

Andere Handbücher für BAS-401

2

Dieses Handbuch passt für folgende Modelle

23

Inhaltsverzeichnis

Andere Brother Nähmaschine Handbücher

Brother

Brother 888-v12 Bedienungsanleitung

Brother

Brother LK3-B434E Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Brother

Brother 925D Bedienungsanleitung

Brother

Brother 888-L90 Bedienungsanleitung

Brother

Brother Innov-is 1500 Bedienungsanleitung

Brother

Brother BAS-761 Bedienungsanleitung

Brother

Brother BM-916A Bedienungsanleitung

Brother

Brother FA-V81A Bedienungsanleitung

Brother

Brother KM-430B Bedienungsanleitung

Brother

Brother 2034D Bedienungsanleitung

Brother

Brother XR-9000 Einrichtungshandbuch

Brother

Brother HS-2500 Einrichtungshandbuch

Brother

Brother BAS-320 Bedienungsanleitung

Brother

Brother BAS-412 Bedienungsanleitung

Brother

Brother FD4-B276 Bedienungsanleitung

Brother

Brother KE-430F Series Bedienungsanleitung

Brother

Brother BE-0901E PC Stücklistenhandbuch

Brother

Brother CPS5XVY Bedienungsanleitung

Brother

Brother 888-E40 Bedienungsanleitung

Brother

Brother CS10 Bedienungsanleitung

Brother

Brother PR-650 Bedienungsanleitung

Brother

Brother VX-1120 Bedienungsanleitung

Brother

Brother S-7300A Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung