Brother BAS-416A Handbuch

Andere Handbücher für BAS-416A

1

Dieses Handbuch passt für folgende Modelle

5

Inhaltsverzeichnis

Andere Brother Nähmaschine Handbücher

Brother

Brother KE-434C Bedienungsanleitung

Brother

Brother T-8722A Bedienungsanleitung

Brother

Brother 884-639 Bedienungsanleitung

Brother

Brother XL-795 Bedienungsanleitung

Brother

Brother NX-450 Bedienungsanleitung

Brother

Brother LK3-B430 Bedienungsanleitung

Brother

Brother TZ1-B652 Bedienungsanleitung

Brother

Brother BE-0901E PC Bedienungsanleitung

Brother

Brother Quattro 6000D Bedienungsanleitung

Brother

Brother BAS-300A Bedienungsanleitung

Brother

Brother BAS-401 Bedienungsanleitung

Brother

Brother CELEBRITY 10 Bedienungsanleitung

Brother

Brother 885-V14 Bedienungsanleitung

Brother

Brother PS-1250 Bedienungsanleitung

Brother

Brother 882-W04 Bedienungsanleitung

Brother

Brother EF4-B681 Bedienungsanleitung

Brother

Brother XM2701 Bedienungsanleitung

Brother

Brother HM-8180 Bedienungsanleitung

Brother

Brother BES Lettering Bedienungsanleitung

Brother

Brother LX2500 Bedienungsanleitung

Brother

Brother S-7180A Bedienungsanleitung

Brother

Brother VX-1435 Bedienungsanleitung

Brother

Brother VX-810 Betriebsanleitung

Brother

Brother 885-E33 Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung

Changing the color change potentiometer

With the power to the machine turned off. Remove the old color change

potentiometer by loosening the two outer setscrews of the color change collar.

These are the ones closest to the potentiometer. Then slide the color change

potentiometer out of the collar and the machine. You may have to rotate the color

change collar to get to both outer setscrews.

Unplug the old color change potentiometer by following the cable out of the

potentiometer and unplugging from the connector located on the thread tension

connector. You will also need to remove any cable ties or clips to remove the

potentiometer from the machine. Please make a note of their location so that

after installing the new one they go back in the same place.

B

BA

AS

S-

-4

41

16

6A

A

&

&

4

42

23

3A

A

B

BE

ES

S-

-1

12

21

10

0

&

&

1

12

23

30

0

For Technical Assistance Please Call Toll Free 1-877-4BROTHER

Thread tension connector

Potentiometer connector

Potentiometer

Setscrews

Color change collar

Potentiometer

Remove the mounting bracket from the old color change potentiometer with a

wrench and install on the new potentiometer in the same orientation as the old

one.

Plug the new color change potentiometer connector into the thread tension

bracket connector but do not install the potentiometer onto the machine.

Turn on power to the machine.

Press the Needle Select button to display the needle bar selection screen.

Turn the color change collar to move the needle bar case to where it is

positioned between needles 1 and 2 as illustrated.

Turn the shaft of the color change potentiometer so that needles 1 and 2 are

flashing on the needle bar selection screen.

Mounting Bracket

Now turn the shaft counterclockwise very slowly until just 2 is flashing.

Install the new color change potentiometer onto the machine by inserting the

shaft in to the color change collar and also that the mounting bracket goes into

the slot. Make sure not to turn the shaft while inserting it into the machine. Then

tighten the two outer setscrews to hold it into position. If you have to rotate the

collar to get to the second setscrew, make sure that one is tightened before

rotating.

Slowly rotate the color change collar counterclockwise so that needle 2 is still

displayed and that the “N” changes to an “O” on the needle bar selection screen

that is displayed on the right of the screen. This “O” means that the machine is

directly on needle number 2.

Check to make sure that the needle the machine is on matches the needle

displayed by color changing with the arrow keys and checking all the needles.

Press the End key when done.

Make sure to reinstall any wire ties or clips that hold the wire of the potentiometer

and you are finished.

Setscrews

Color change collar

Potentiometer

Slot