Brother Entrepreneur Pro PR-1000 Bedienungsanleitung

Operation

Manual

Upgrade KITI

CONTENTS

BEFORE YOU START................................................................................................................. 2

NEW FEATURES ........................................................................................................................ 2

DISPLAYING THE FABRIC WHILE ALIGNING THE EMBROIDERY POSITION.......................... 3

CHANGING THE PATTERN SIZE WHILE MAINTAINING THE DESIRED THREAD DENSITY

(STITCH RECALCULATOR)........................................................................................................ 6

FIND NEW COLOR SCHEMES WITH THE COLOR SHUFFLING FUNCTION........................... 8

The Color Shuffling Function ............................................................................................... 8

Saving and Recalling the Custom Thread Table using USB media ...................................... 10

USING THE CAMERA TO CONNECT PATTERNS ................................................................... 12

Connecting Patterns ........................................................................................................... 12

Practice (Connecting Three Patterns) ................................................................................. 13

Changing the Position of a Sticker ..................................................................................... 21

Connecting Rotated Patterns .............................................................................................. 26

Changing the Reference Edge and Reference Point for Connecting the Next Pattern after a

Pattern has been Embroidered ........................................................................................... 28

Sliding the Position of the Pattern to be Connected ............................................................ 31

Troubleshooting and Quick Reference Chart ..................................................................... 35

Resume Feature ................................................................................................................. 36

NEW PATTERNS...................................................................................................................... 37

Thumbnail List ................................................................................................................... 37

Color Change Table for the Embroidery Patterns ................................................................ 38

BEFORE YOU START

It is important to perform the upgrade according to the procedure outlined in the Installation Guide. The

machine can then be used as outlined in this upgrade Operation Manual.

NEW FEATURES

The following features will be activated with the upgrade for Kit I.

• Positioning of the embroidery pattern can be aligned while displaying the fabric being used in the LCD

screen. Embroidery can easily be positioned. (page 3)

• Embroidery patterns can be enlarged or reduced while maintaining their thread density. (page 6)

• Color Shuffling function is added to find new color schemes suggested by your embroidery machine. Select

the desired effect from one of the four available color schemes, then the sample for the selected effect is

displayed. (page 8)

• The custom thread table setting can be saved to USB media as a data file, and then recalled again. (page 10)

• Embroidery patterns can be connected using the built-in camera function, replacing the use of thread marks.

(page 12)

• 10 new embroidery patterns have been added. (page 37)

• 2 new fonts are added to the font selection screen. (page 37)

DISPLAYING THE FABRIC WHILE ALIGNING THE

EMBROIDERY POSITION

The fabric hooped in the embroidery frame can be

displayed on the LCD so that the embroidery position

can be aligned.

This feature can be used from the pattern editing screen

and embroidering settings screen.

aHoop the fabric in the embroidery frame, and

then attach the frame to the embroidery

machine.

bSelect the pattern, and then press .

cPress .

dWhen the following message appears, press

→The embroidery frame moves so the fabric can be

scanned.

Note

• When installing the following optional frame, the

built-in camera cannot be used to align the

embroidering position:

Cylinder frame, 80 mm (H) × 90 mm (W) (3 inches

(H) × 3-1/2 inches (W))

Wide cap frame, 60 mm (H) × 360 mm (W) (2-3/8

inches (H) × 14 inches (W))

Advanced cap frame 2, 60 mm (H) × 130 mm (W)

(2-3/8 inches (H) × 5-1/8 inches (W))

Advanced cap frame, 50 mm (H) × 130 mm (W) (2

inches (H) × 5-1/8 inches (W)).

• For details on using fabric thicker than 2 mm, refer

to “Positioning the pattern on thick fabric” (page 5).

Note

• Check page 7/7 of Settings screen to make sure the

“Fabric Thickness Sensor” is set to “OFF” when

using light to medium weight fabrics.

eWhen the fabric appears as a background for

the pattern, the pattern can be edited if it is

necessary.

fUse to align the pattern with the

desired embroidery position.

• The pattern can be moved to the desired position by

using your finger or the touch pen to drag the

pattern displayed on the screen.

gPress to display the embroidery

settings screen.

hPress to start embroidering.

→When embroidery is finished, the fabric displayed in

the background disappears.

Whether the fabric disappears or remains displayed can

be specified from page 7/7 of the settings screen.

aSet to “ON” to leave the fabric displayed in the

background.

bWhen set to “OFF”, the background will disappear.

cPress to remove the background image

completely.

Memo

• If necessary, press to display a preview in

order to check the pattern position.

Memo

• The pattern can also be aligned from the embroidery

settings screen.

Note

• If the embroidery is not sewn, the fabric background

will remain on the screen.

In the Settings screen 7/7, press to erase

the background image.

■Positioning the pattern on thick fabric

When positioning the pattern on the fabric thicker than

2 mm, the fabric may not be detected correctly. In order

for the fabric to be correctly detected, its thickness must

first be measured.

aHoop the fabric in the embroidery frame, and

then attach the frame to the machine.

bSelect the pattern, and then press .

cDisplay page 7/7 of the settings screen, and

then set “Fabric Thickness Sensor” to “ON”.

dPress .

ePress .

fAffix the embroidery positioning sticker to the

fabric within the area indicated by the red

frame in the LCD, and then press .

gWhen the following message appears, remove

the embroidery positioning sticker, and then

press .

→The embroidery positioning sticker affixed to the

fabric is detected, and then the embroidery frame

will be moved.

hContinue with step eon page 4 to align the

pattern with the desired embroidery position.

Memo

• This feature is functional only when the fabric is

scanned. It will not affect embroidering if it is turned

on with normal embroidery.

CAUTION

• Use fabrics with a thickness of less than 3 mm

(approx. 1/8 inch). Using fabrics thicker than 3 mm

(approx. 1/8 inch) may cause the needle to break.

CHANGING THE PATTERN SIZE WHILE MAINTAINING THE

DESIRED THREAD DENSITY (STITCH RECALCULATOR)

In the embroidery edit screen, the size of the pattern

can be changed while the desired thread density is

maintained.

With this function, the pattern will be enlarged or

reduced at a larger ratio than with normal pattern

resizing.

aSelect the pattern to be resized, and then

press .

bPress .

cPress to enter Stitch Recalculator mode

().

dWhen the following message appears, press

→The pattern will be returned to its original size,

angle, and position as it was before it was edited.

Note

• Be sure to sew trial embroidery using same fabric

and threads as project in order to check the

embroidering results.

Note

• This function cannot be used with alphabet

character patterns, frame patterns or border

patterns. However, a border pattern can be edited

after this function has been used.

• Patterns with a large number of stitches (about

100,001 or more) cannot be resized while

maintaining a desired thread density. The maximum

limit for the number of stitches differs depending on

the data size of pattern.

• If this function is used, thread density is maintained

while the pattern is enlarged/reduced. However, the

needle drop point pattern is not entirely maintained.

Use the normal resizing mode depending on

the results of trial embroidering.

Memo

• Stitch Recalculator cannot be used if does

not appear.

eSelect how to change the pattern size.

* Press to enlarge the pattern proportionately.

* Press to shrink the pattern proportionately.

* Press to stretch the pattern horizontally.

* Press to compact the pattern horizontally.

* Press to stretch the pattern vertically.

* Press to compact the pattern vertically.

* Press to return the pattern to its original appearance.

fPress .

Memo

• With the density scale bar, the thread density can be

changed.

A setting between 80% and 120% in 5% increments

can be specified.

* Press to make the pattern less dense.

* Press to make the pattern more dense.

Note

• Depending on the pattern, embroidering may not be

possible at the appropriate thread density. Before

sewing on your project, be sure to embroider a trial

sample on a piece of scrap fabric that is the same as

the fabric used in the project, using the same needle

and embroidery thread.

• If the pattern is enlarged and there is space between

stitches, a better effect can be achieved by

increasing the thread density.

• If the pattern is reduced and the stitching is too thick,

a better effect can be achieved by reducing the

thread density.

CAUTION

• Depending on the pattern, the stitching may

become entangled or the needle may break when

the pattern is reduced. If this occurs, slightly

enlarge the pattern.

FIND NEW COLOR SCHEMES WITH THE COLOR

SHUFFLING FUNCTION

The Color Shuffling Function

With the Color Shuffling function, the machine suggests

new color schemes for the embroidery pattern that you

have selected. After you select the desired effect from

one of the four available color schemes (“RANDOM”,

“VIVID”, “GRADIENT” and “SOFT”) the sample for the

selected effect is displayed.

aPress .

→The thread color palette screen appears.

bPress .

cSelect the color group you want to use.

→You can select the color shuffling function from the

following color groups. 1Thread colors currently

on the spool stand, 2thread table (64 colors: preset

color table) and 3custom thread table (300 colors:

color table that you can set as you like).

By setting the embroidery thread colors of the brand

you have on the custom thread table, you can create

your embroidery pattern with your own thread

colors.

aThread colors currently on the spool stand

bThread table (64 colors)

cCustom thread table (300 colors)

dSelect the number of colors you want to use

and then select the desired effect.

aNumber of colors to be used in the pattern

bEffects for schemes

Note

• This function may not be available depending on the

pattern you select (ex. a bordered embroidery

pattern).

If the color shuffling key is grayed out, select

another pattern.

• If you have not created a custom thread table, the

color shuffling key will be grayed out. In that case,

use the thread table (64 colors) instead or create

colors in the custom thread table. Refer to “Creating

a custom thread table” in the Operation Manual of

the machine for the details.

ePress the desired color scheme from samples.

* Press to display the new schemes.

aPress to review the previous schemes.

Note

• When any of the color scheme selection keys are

greyed out, there are not enough colors in the

selected color group.

If you selected the custom thread table, set more

colors in the custom thread table, or select less

colors in the Color Shuffling function. Refer to

“Creating a custom thread table” in the Operation

Manual for the machine, about setting the colors in

the custom thread table.

aUnavailable effects

Memo

• Selection for the desired number of colors must stay

within the range for the number of thread changes

for the pattern you selected.

• When using this function the PES data pattern

recalled on the machine, and the “PES Thread

Code” is set to “ON” in the Settings Screen, the

thread colors which are not in the thread table of the

machine will not be used to make the color

schemes.

You can get the color schemes using all the thread

colors in the selected pattern by setting “PES

Thread Code” to “OFF” in the Settings Screen.

Note

• Maximum 10 pages of schemes can be reviewed.

After 10 pages of schemes, the oldest page is

deleted every time you press .

Andere Handbücher für Entrepreneur Pro PR-1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Nähmaschine Handbücher

Brother

Brother 082-8792 Bedienungsanleitung

Brother

Brother Laura Ashley Innov-is NX800 Bedienungsanleitung

Brother

Brother DB2-B792-100 Bedienungsanleitung

Brother

Brother EF4-B671 Bedienungsanleitung

Brother

Brother SL-1110 Bedienungsanleitung

Brother

Brother Upgrade KIT III Bedienungsanleitung

Brother

Brother XC5434-051 Bedienungsanleitung

Brother

Brother HE-800A Bedienungsanleitung

Brother

Brother Duetta 4500D Bedienungsanleitung

Brother

Brother 884-B30 Installationshandbuch

Brother

Brother DB2-B721 Bedienungsanleitung

Brother

Brother FD3-B256 Bedienungsanleitung

Brother

Brother KM-430B Bedienungsanleitung

Brother

Brother BAS-311A Bedienungsanleitung

Brother

Brother Innov-is NX-650 Bedienungsanleitung

Brother

Brother BE-901 Bedienungsanleitung

Brother

Brother BAS-320 Bedienungsanleitung

Brother

Brother LK3-B430E MARK II Bedienungsanleitung

Brother

Brother NQ1400E Bedienungsanleitung

Brother

Brother LZ2-B850 Bedienungsanleitung

Brother

Brother 929D Bedienungsanleitung

Brother

Brother BAS-311G Einrichtungshandbuch

Brother

Brother 884-T20 Bedienungsanleitung

Brother

Brother Innov-is 1500D Leitfaden

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung