Brother XL-6060 Bedienungsanleitung









6. 2001.

www.promelectroavtomat.ru



This service manual has been compiled for explaining repair procedures of the MODEL XL-6060, XL6050, XL-

6040.

This was produced based on up-to-date product specifications at the time of issue, but there may have been

changes of specifications for the purpose of improvements.

Contact manufacturer or local sales company for information concerning such changes.

Brother Industries, Ltd.

Nagoya, Japan



I.PRINCIPAL MECHANISMS..................................................................................1

II.DISASSEMBLING AND REASSEMBLING THE SEWING MACHINE................6

III.MECHANICAL ADJUSTMENT STANDARDS AND ADJUSTMENT

PROCEDURES...................................................................................................28

IV.TROUBLESHOOTING PROCEDURES..............................................................55



1. Use the operation procedure given in this document.

2. Always disconnect the power cord from the socket before starting to install or remove any parts.

3. Always replace only with genuine Brother parts.

4. Do not alter this sewing machine.

*Doing so can cause fire, electrical shock, injury, etc.

www.promelectroavtomat.ru

-1-

I. 

1.MECHANICAL CHART....................................................................................2

2.POWER TRANSMISSION CHART..................................................................3

www.promelectroavtomat.ru

-2-

1. MECHANICAL CHART

www.promelectroavtomat.ru

-3-

2. POWER TRANSMISSION CHART

(A) Generating mechanism of needle bar, thread take-up lever and zigzag movements

Thread take-

up lever Thread take-

up crank Worm gear Timing pulley

Needle bar

crank rod

Needle ba

clamp

Needle bar Needle bar

block assembly

Needle

Pattern cam

Zigzag connecting

rod Z finger Selecting cam

Upper shaft

www.promelectroavtomat.ru

-4-

(B) Mechanism of feed dog and rotary hook movement

Lower shaft

gear

Rotary hoo

assembly

Feed dog

Feed carriage

Vertical feed

cam

Horizontal

feed plate

Feed pattern

cam

Feed finger

Feed regulator

Horizontal

feed shaft

Horizontal feed cam

pulley

Forked

connecting rod

Horizontal

feed arm

Lower shaft

Timing belt

Lower shaft

timing belt

Worm gear Timing pulley

Driving belt

Motor

www.promelectroavtomat.ru

-5-

BH change

shaft BH change

arm BH stopper BH cam BHF finger

assembly

BH Iever

BH foot

Feed control

cam (BH) BHF finger

assembly

2-(A)

2-(B)

www.promelectroavtomat.ru

-6-

II. 



1.DISASSEMBLING AND REASSEMBLING

THE OUTER PARTS AND MAIN PARTS........................................................7

2.LEAD WIRE ARRANGEMENT.......................................................................27

www.promelectroavtomat.ru

-7-

1. DISASSEMBLING AND REASSEMBLING THE OUTER PARTS AND MAIN

PARTS

Disassembly procedure

1. Remove the screws holding the face plate, then remove the face plate to the left.

2. Remove the flat bed attachment by sliding it to the left.

3. Remove the six screws holding the front cover (three on the rear, two on the bottom, one of the left), then lift

up the front cover from the bottom side, open it forward, and remove it.

4. Lower the presser lifter, remove the four screws holding the rear cover (two on front, one on rear, and one

on bottom), and then remove the rear cover. Remove the handle too.

www.promelectroavtomat.ru

-8-

5. Remove the two screws holding the 3-pin socket folder assembly on the rear of the sewing machine,

remove the 3-pin socket folder, and then remove the three wiring harness bands for the lamp cord.

6. Remove the screws holding the cord clamp.

7. Remove the two screws holding the motor holder, then remove the motor. The driving belt can be removed

too.

Lamp cord

www.promelectroavtomat.ru

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Nähmaschine Handbücher

Brother

Brother KXC4589-051 Bedienungsanleitung

Brother

Brother PS-2500 Konfigurationshandbuch

Brother

Brother 885-E33 Bedienungsanleitung

Brother

Brother PE500 Bedienungsanleitung

Brother

Brother NV10 Bedienungsanleitung

Brother

Brother BAS-342G PS Montageanleitung

Brother

Brother DB2-DD7100 Bedienungsanleitung

Brother

Brother S-7220B Bedienungsanleitung

Brother

Brother PR655 Montage- und Bedienungsanleitung

Brother

Brother LS2-F53A Bedienungsanleitung

Brother

Brother B706 Bedienungsanleitung

Brother

Brother DreamMaker„ XE Innov-is VE2200 Bedienungsanleitung

Brother

Brother SCANNERII Fehlerbehebungshandbuch

Brother

Brother LS-1717 Bedienungsanleitung

Brother

Brother BAS-343E Bedienungsanleitung

Brother

Brother XR-9000 Bedienungsanleitung

Brother

Brother Innov-is NX600 Montageanleitung

Brother

Brother LH4-B800E Bedienungsanleitung

Brother

Brother PS3734T Bedienungsanleitung

Brother

Brother S-7100A Montageanleitung

Brother

Brother DA-9270 Bedienungsanleitung

Brother

Brother LS-30 Bedienungsanleitung

Brother

Brother ULT-2003D Bedienungsanleitung

Brother

Brother XM2701 Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung