Bryant IIT2-WHS-02 Bedienungsanleitung

Installation Instructions

T2--WHS01

Legacy™Line Wi--FirThermostat

NOTE: Read the entire instruction manual before starting the installation.

TABLE OF CONTENTS

PAGE

GETTING STARTED 1...........................................

Safety Considerations 1...........................................

Before You Begin 2..............................................

HVAC System Compatibility Information 3...........................

Approvals 4....................................................

FCC Compliance Statement 4......................................

Specifications 6.................................................

Wiring Requirements 7...........................................

INSTALLATION 8...............................................

Step 1. Power Off HVAC Equipment 8...............................

Step 2. Remove Existing Thermostat 8...............................

Step 3. Install the Thermostat 8.....................................

Step 4. Connect the Wiring 10......................................

Step 5. Power On the HVAC Equipment 20...........................

NAVIGATING THE MENUS 21....................................

CONFIGURING THE THERMOSTAT 23............................

Equipment 23..................................................

Thresholds 25..................................................

Test Equipment 28..............................................

Reset HVAC Equipment Settings 29.................................

Performing a Hardware Reset 29...................................

Rebooting the thermostat 29.......................................

Configuring Reminders and Alerts 30................................

Alerts 31......................................................

List of Alerts 32................................................

GETTING STARTED

Safety Considerations

Improper installation, adjustment, alteration, service, maintenance, or use

can cause explosion, fire, electrical shock, or other conditions which may

cause death, personal injury or property damage. Consult a qualified

installer, service agency or your distributor or branch for information or

assistance. The qualified installer or agency must use factory--authorized

kits or accessories when modifying this HVAC system. Refer to the

individual instructions packaged with the kits or accessories when

installing.

Follow all safety codes. Wear safety glasses, protective clothing, and

work gloves. Have a fire extinguisher available. Read these instructions

thoroughly and follow all warnings and cautions included in literature

and attached to the unit. Consult local building codes and the current

edition of the National Electrical Code (NEC) NFPA 70. In Canada, refer

to the current editions of the Canadian Electrical Code CSA C22.1.

Recognize safety information. When you see this symbol on the unit

and in instructions or manuals, be alert to the potential for personal

injury. Understand the signal words DANGER,WARNING,and

CAUTION. These words are used with the safety--alert symbol.

DANGER identifies the most serious hazards, which will result in severe

personal injury or death. WARNING signifies hazards, which could

result in personal injury or death. CAUTION is used to identify unsafe

practices, which may result in minor personal injury or product and

property damage. NOTE is used to highlight suggestions which will

result in enhanced installation, reliability, or operation.

Before You Begin

This product is intended to be installed by trained service professionals.

This manual explains the procedures for installing the BryantLegacyt

Line Wi--Fi Thermostat. Please read it carefully before beginning the

installation.

For information on how to operate the Legacy Line Wi--Fi Thermostat,

please see the Legacy Line Wi--Fi Thermostat Owner’s Manual.

The Legacy Line Wi--Fi Thermostat is designed to be mounted on the

homeowner’s wall in a convenient location.

A13336

PERSONAL INJURY HAZARD

Disconnect electric power to the HVAC system before

installing this product. Failure to do so could result in electric

shock and/or equipment damage.

All wiring must conform to your local electrical code.

Mercury Notice: This product does not contain mercury. If

you are replacing a product that does contain mercury, contact

your local waste--management authority for disposal

instructions. Do not discard the old product in the regular

trash.

CAUTION

HVAC System Compatibility Information

The Legacy Line Wi--Fi Thermostat is designed to operate with

low--voltage heating and cooling systems. It is not designed for use with

line--voltage or millivolt heating and cooling systems.

The Legacy Line Wi--Fi Thermostat supports:

dUp to 2 heat and 2 cool stages on a conventional system.

dUp to 3 heat and 2 cool stages on a heat pump system.

The Legacy Line Wi--Fi Thermostat supports the following equipment:

Equipment Supported?

Gas / Oil / Electric heating

(uptotwostages)

YES

Heat pump with auxiliary heat

(up to three stages)

YES

Geothermal Heat Pump YES

Dual fuel systems YES

Standard electric cooling

(uptotwostages)

YES

Boilers YES

Approvals

This product was designed and built in accordance to RoHS directive

2002/95/EC and contains no hazardous substances as defined by this

directive.

Federal Communications Commission (FCC)

Compliance Notice:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

dReorient or relocate the receiving antenna.

dIncrease the separation between the equipment and receiver.

dConnect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

dConsult the dealer or an experienced radio/TV technician for

help.

This device complies with part 15 of FCC rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including inter-

ference that may cause undesired operation.

Change or modifications that are not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. In order to avoid the possibility of

exceeding the FCC radio frequency exposure limits, human proximity to

the antenna shall not be less than 20cm during normal operation.

Industry Canada (IC)

Compliance Notice:

This device complies with Industry Canada license--exempt RSS

standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference

that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES--003.

RF Exposure Statement:

This equipment complies with IC RSS--102 radiation exposure limits set

forth for an uncontrolled environment. This transmitter must be installed

to provide a separation distance of at least 20 cm from all persons and

must not be collocated or operating in conjunction with any other

antenna or transmitter.

Specifications

Temperature Ranges

Heat: 50to88°F (10 to 31°C) by default,

adjustable from 50 to 90°F (10 to 32°C)

Cool: 52to90°F(11to32°C) by default,

adjustable from 50 to 90°F (10 to 32°C)

Display: 40 to 100°F(5to37°C)

Sensitivity: +/-- 1°F(0.5°C)

Operating 32 to 130°F(0to55°C)

Humidity Range

Display: 20 to 90% R.H.

Sensitivity: +/-- 5% R.H.

Operating: 5 to 95% R.H. (non--condensing)

Dimensions

Thermostat: 5.5” W x 3.25” H x 1” D

(139.5mm W x 82.5mm H x 25mm D)

Power Consumption

24VAC (3VA maximum)

Wiring Requirements

The following table shows the maximum wire lengths allowed:

Thermostat to HVAC Equipment

18 AWG 20 AWG 22 AWG

128 ft (380m) 80 ft (240m) 50 ft (150m)

Terminal Description and Electrical Ratings

Terminal Description Voltage Current (Max)

N/C Unused N/A N/A

Y 1st Stage Compressor 24V AC 2A

W(O/B) 1st Stage Heating or

Reversing Valve

Changeover

24V AC 2A

GFan 24V AC 2A

CCommon 24V AC 2A

Y2 2nd Stage Compressor 24V AC 2A

W2 (AUX) 2nd Stage Heating or

1st Stage Aux Heat

24V AC 2A

NOTE: Factory jumper installed between RC and RH. Remove jumper for

2--transformer applications. See wiring diagrams for additional information.

INSTALLATION

There are 5 steps to install the thermostat:

Step 1 — Power Off HVAC Equipment

Step 2 — Remove Existing Thermostat

Step 3 — Install the Wi--Fi Thermostat

Step 4 — Connect the Wiring

Step 5 — Power On HVAC Equipment

Step 1. Power Off HVAC Equipment

Before disconnecting the existing thermostat, or installing the Legacy

Line Wi--Fi Thermostat, disconnect the power to the heating and air

conditioning equipment.

Step 2. Remove Existing Thermostat

Disconnect the wires to the existing thermostat and remove it from the

wall.

Step 3. Install the Legacy Line Wi--Fi Thermostat

The ideal location for the thermostat is approximately 5 ft (1.5 m) above

floor level in the main living area.

Do not install the thermostat:

dClose to sources of heat such as incandescent lights

dNear supply heating/cooling sources

dIn direct sunlight

dOn exterior, non--insulated or poorly insulated walls

dIn the kitchen or other areas of potentially high heat and/or hu-

midity

dIn an area that could restrict air flow

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bryant Thermostat Handbücher

Bryant

Bryant PREFERRED T6-NRH Bedienungsanleitung

Bryant

Bryant PREFERRED T6-NAC Bedienungsanleitung

Bryant

Bryant Legacy Series Bedienungsanleitung

Bryant

Bryant PREFERREDT A07044 Bedienungsanleitung

Bryant

Bryant PREFERRED T6-PRH Bedienungsanleitung

Bryant

Bryant TSTATBBN2W01 Leitfaden

Bryant

Bryant Evolution Connex Control SYSTXBBECC01-C Bedienungsanleitung

Bryant

Bryant Legacy Touch-n-Go T2- PHP01- A Bedienungsanleitung

Bryant

Bryant TSTATBBPQ501 Leitfaden

Bryant

Bryant T6-PRH-A li Handbuch

Bryant

Bryant NON-PROGRAMMABLE THERMOSTAT Bedienungsanleitung

Bryant

Bryant LEGACY T2-PAC Bedienungsanleitung

Bryant

Bryant OM TSTAT-1 Leitfaden

Bryant

Bryant TSTATCCPB101 Bedienungsanleitung

Bryant

Bryant TSTATBBNQ001 Leitfaden

Bryant

Bryant P/N TSTATBBP220-01 Leitfaden

Bryant

Bryant TSTAT Anleitungen und Rezepte

Bryant

Bryant AND THERMIDISTAT CONTROL Montageanleitung

Bryant

Bryant 53DFST2-NP-BRY Bedienungsanleitung

Bryant

Bryant TSTATBBPRF01-B Bedienungsanleitung

Bryant

Bryant SYSTXBBUID01--D Bedienungsanleitung

Bryant

Bryant start-up and Anleitungen und Rezepte

Bryant

Bryant EVOLUTION Zone Control SYSTXBBUIZ01-B Bedienungsanleitung

Bryant

Bryant 53DFST2-NP-BRY Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung