BT DECOR 110 Bedienungsanleitung

✱

SECRECY REDIAL

STORE QUICKDIAL

ANSWER

ON/OFF PLAY

REW

Response 110

Telephone & Answering Machine

MIC

Edition 9 – 10 March 1999

At a glance

At a glance A

Handset catch

Retains handset if

wall mounted.

Handset park

To rest the handset

during a call when the

Response 110 is wall

mounted.

Recall button for use with

switchboards and BT Select Services.

Quickdial

Enables you to dial

phone numbers

stored in the

memory.

Store

Allows you to

store up to 10

numbers in the

memory.

Redial/Pause

Redials the last number

called. Inserts a pause.

Secrecy

Allows you to talk to

someone in the same

room without the person

on the other end of the

line hearing your

conversation.

Cover

Lift to access

further control

buttons and the

microcassette.

Microphone

For recording outgoing

messages and memos.

LED

Indicates when

the answering

machine is

switched on/off,

or any incoming

messages or

memos, have

been left.

Rewind/Play

Press to play

back messages

and memos.

Rewinds the tape

during playback.

Answer On/Off

Switches the answering

machine on and off.

Response 110 user guide 19/1/2000 12:43 pm Page 3

SAVE

To record an outgoing

message. Press and hold

the OGM button. Speak

after the tone. Press stop

to end the recording.

STOP

OPEN TO

ACCESS CASSETTE

SECURITY CODE:

– +

OGM MEMO

Edition 9 – 10 March 1999

At a glance

Recording MC30

cassette

15 minutes per side,

fits under the cassette

safety cover. Microcassette lid

Lift to access the

microcassette.

Memo/

Fast Forward

Press to record a

memo message.

Fast forwards the

tape during

message playback.

OGM

Allows you to record and check

your outgoing message.

Directory label

Allows you to note down

the numbers stored in the

memory.

Save/Stop

Stops certain

functions and saves

messages after

playback.

Volume

Adjusts the volume

during message

playback and when

recording memos

or your outgoing

message.

MEM

................

...............

................

.................

Response 110 user guide 19/1/2000 12:43 pm Page 4

Edition 9 – 10 March 1999

At a glance 1

Introduction 4

Setting up 5

Using your Response110

answering machine 8

Using your Response110

telephone 14

Additional features 16

Help 19

Maintenance 21

Technical information 22

Index 23

Hints and tips boxes

In this user guide, we’ve included helpful tips and

useful notes. They are shown in a grey box.

In this guide

Contents

Response 110 user guide 19/1/2000 12:43 pm Page 5

For your records

Date of purchase:

Place of purchase:

Serial number:

(on the underside of the machine)

Purchase price:

For guarantee purposes, proof of purchase

is required, so please keep your receipt

safe.

Check that your Response 110 is complete.

When you unpack you should have:

•Response 110 with telephone line cord

attached.

•Mains power adaptor.

•30 minute MC30 cassette (already fitted)

(15 minutes per side).

•2 screws and 2 Rawlplugs for wall mounting.

•Spare memory label.

We thank you for making the right choice and

trust that your Response 110 will give you

many years of quality service.

Please read the instructions carefully before

use, and keep this user guide for future

reference.

Edition 9 – 10 March 1999

Introduction

Your Response 110 is designed for ease of use and made to the high

standards set by BT

Introduction

Response 110 user guide 19/1/2000 12:43 pm Page 6

1 Plug your Response 110 into

the phone socket

If you do not have a modern phone socket,

call Freefone 0800 800 150 and ask for a BT

engineer to come and fit the correct socket.

This is a chargeable service.

Warning

1Do not try to use any power adaptor

except the one provided (item code

871036) if you do you may

permanently damage your Response 110

and this will invalidate the warranty.

Edition 9 – 10 March 1999

Setting up

Follow these steps to get your Response 110 ready for use

Plan where you will put your Response 110.

It should be within two metres of a power socket

and the phone socket.

Setting up

Response 110 user guide 19/1/2000 12:43 pm Page 7

4 Set the dial mode

Your Response 110 is pre-set to TONE (TB)

dialling. This ensures the phone will work with

all modern digital exchanges.

If you dial a number and continue to hear the

dialling tone, you may need to switch the

phone to PULSE (P) dialling.

5 Set the ringer volume

The ringer switch is located on the back of the

base unit. There are three settings.

•HI– a loud ring.

Your Response 110 is pre-set to this position.

•LO– a quiet ring.

•OFF– no ring.

OFF LO HI

P TB

Edition 9 – 10 March 1999

Setting up

2 Plug the power cord into the

back of the machine

To prevent the power cord being pulled out

accidentally, route it behind the clip on the

back of the unit.

3 Now plug the adaptor into a

convenient mains power socket

When the power is switched on you hear

a single beep, the MC30 cassette operates

briefly.

Response 110 user guide 19/1/2000 12:43 pm Page 8

6 Wall mounting (optional)

Before you start, make sure that the telephone

is in easy reach of the power supply and a

telephone socket, and that the wall can support

the weight of your Response 110.

Drill two holes for the screws and insert the

Rawlplugs provided (if you need them).

Insert the screws leaving about 2-3 mm

sticking out to hang the bracket from.

A template is printed at the back of this guide

(page 25) which you can use to mark where you

will put the screws into the wall.

Attach the Response 110 by hooking it over the

screws protruding from the wall.

Wall

Rawlplug Screw

Edition 9 – 10 March 1999

Setting up

Pull out and turn the handset clip around to

prevent the handset from falling off the base

when wall mounted.

Handset park

When wall mounted, if you need to

temporarily move away from the phone

during a conversation, you can hook the

handset on the handset park on the top

of your Response 110.

SECRECY REDIAL

Response 110 user guide 19/1/2000 12:43 pm Page 9

Switching the answering machine

on and off

To switch on

•Press the ANSWER ON/OFF button. You will

hear a short beep. The tape motor operates

briefly and the red LED comes on.

To switch off

•Press the ANSWER ON/OFF button. You will

hear a short beep. The red LED goes out.

Any messages recorded will be saved.

Using your Response110

answering machine

Using your Response 110

answering machine

PLAY

REW

ANSWER

ON/OFF

Edition 9 – 10 March 1999

To change your MC30 cassette

Lift the main cover to reveal the control buttons

and the cassette safety cover.

•Open the cassette safety cover.

•Check that the Aside of the MC30 cassette

is facing upwards.

Your Response 110 is supplied and fitted with a

30 minute cassette which gives a total recording

time of 15 minutes per side, including the time

allowed for your outgoing message. If desired, the

tape can be turned over by hand. You will need to

record a new outgoing message.

SAVE

To record an outgoing

message. Press and hold

the OGM button. Speak

after the tone. Press stop

to end the recording.

STOP

OPEN TO

ACCESS CASSETTE

SECURITY CODE:

– +

OGM MEMO

Response 110 user guide 19/1/2000 12:43 pm Page 10

Edition 9 – 10 March 1999

Using your Response 110

answering machine

To adjust the speaker volume

•Press the volume button on the +side to

increase the volume. You hear beeps getting

louder to indicate the volume level.

•Press the volume button on the –side to

reduce the volume. The beeps get quieter to

indicate the changing volume level.

Pre-recorded outgoing message

The outgoing message is the greeting a caller

hears when your Response 110 answers a call.

It is supplied with the following pre-recorded

outgoing message: ‘Hello your call cannot be

taken at the moment, so please leave your

message after the tone’. This message can be

kept as your outgoing message, or if you

prefer, you can replace it by recording your

own message.

Please note

Once you have recorded over the pre-recorded

message it is permanently erased and you will not

be able to retrieve it.

To record your own outgoing message

The outgoing message is the message people

hear when they call you.

•Press and hold down the OGM button for

about 10 seconds or until you hear a long

beep.

•Release the OGM button and record your

message. Speak clearly from about 15/30 cm

from the microphone.

•Press the SAVE/STOP button to end the

recording. Your Response 110 will

automatically replay your message.

•You can record an outgoing message of up

to 30 seconds.

To record a new outgoing message, repeat the

steps above.

To check your outgoing message

•Press and release the OGM button.

Your message will be played back.

Your outgoing message may sound something like

this “Hello, I’m sorry I can’t take your call at

present. If you would like to leave a message please

speak after the tone”.

OGM

– +

Response 110 user guide 19/1/2000 12:43 pm Page 11

Receiving messages

Your Response 110 will automatically record

incoming calls once it is connected to the

mains power and telephone socket and

switched to answer on.

When you get an incoming call, your Response

110 will answer the call after four rings. It will

then play your outgoing message and record

any incoming messages.

To play back your messages

New messages indicator

Check the red LED. If you have new messages,

the light flashes.

If there are no new messages, the LED will

be on.

•Press the REW/PLAY button. Your messages

are played back in the order they were

received.

During playback you can stop, fast forward or

rewind the tape.

To pause playback

•Lift the main cover.

•Press the SAVE/STOP button.

Playback pauses. To resume playback press

the REW/PLAY button.

To stop playback

•Lift the main cover.

•Press the SAVE/STOP button. Playback stops.

To fast forward during playback

•Lift the main cover.

•Press and hold down the MEMO/FF

button. When you release the button,

message playback resumes. If you

hear two short beeps, you have reached

the end of all the messages. The tape will

automatically rewind to the start of the

messages.

Using your Response 110

answering machine

MEMO

PLAY

REW

Edition 9 – 10 March 1999

Your Response 110 is supplied with a 30 minute

cassette which gives a total recording time of

15 minutes per side, including the time allowed for

your outgoing message. If desired, the tape can be

turned over by hand. You will need to record a new

outgoing message.

SAVE

STOP

SAVE

STOP

Response 110 user guide 19/1/2000 12:43 pm Page 12

Andere Handbücher für DECOR 110

Inhaltsverzeichnis

Andere BT Telefon Handbücher

BT Gigaset pro Einrichtungshandbuch

BT Duet 210 Bedienungsanleitung

BT Revelation Montageanleitung

BT PARAGON 500 Bedienungsanleitung

BT DIVERSE 5210 Bedienungsanleitung

BT Concero 1500 Bedienungsanleitung

BT Freestyle 90 Bedienungsanleitung

BT T46 Bedienungsanleitung

BT EASICOM TV1 Bedienungsanleitung

BT Big Button 100 Bedienungsanleitung

BT RELATE 550 Bedienungsanleitung

BT Converse 325 Bedienungsanleitung

BT Revelation Benutzerhandbuch

BT BT2500 Technisches Datenblatt

BT Synergy 700 Bedienungsanleitung

BT Diverse 2010 Bedienungsanleitung

BT IN TOUCH PENDANT Bedienungsanleitung

BT Decor 2500 Bedienungsanleitung

BT PARAGON 400 Bedienungsanleitung

BT Contour 200 Bedienungsanleitung

BT verve 450 Bedienungsanleitung

BT BT Synergy 5500 Bedienungsanleitung

BT FREELANCE 501 Bedienungsanleitung

BT Diverse 6350 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung